mr Dzirt help me out - GSM-Forum

Engiess · 11-18-2013, 20:51

nokia 5230 was came to me today with flashing problem but after flash, English language not in phone option i decided to download the same product code but version is low then i erase the phone after erase i flash it back but after write rpl phone show sim not valid

sagez gsm1 · 11-18-2013, 20:55

please log best .. bro

Engiess · 11-18-2013, 21:06

this is th rpl of the phone
355353046133751 - Download - 4shared

Engiess · 11-18-2013, 21:13

Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-588_50.0.001_prd.core.C00
PPM : RM-588_50.0.001_prd.rofs2.V01
CNT : 891CF60F_RM588_50.0.001_002_U293.uda.fpsx
Flashing phone now...
Rules accepted for : RAPIDO Generation
Check files done...
-> SWversion check skipped : Dead mode selected
- > Force ColdFlash mode
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 14F001145FA300525C333E0BCCD40DDBC6DB4EDA
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : Blank (Erased or HW failure)

CFL: phone is in flash mode

=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing RM-588_50.0.001_prd.core.C00
Partitioning....
Partitioning Ok...
Erasing....
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND
Erase area : 0x00400000 - 0x007FFFFF , CMT , NAND
Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND
Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND
Erase Partition
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01
CFL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

Write : Processing RM-588_50.0.001_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 436 blocks
TIME : Write time : 00:02:41
MCU Write done
CFL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

===Flashing [PPM]===
Erase : Processing RM-588_50.0.001_prd.rofs2.V01
Erasing....
Erasing Data....
Erase area : 0x06FE0000 - 0x0915FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

Write : Processing RM-588_50.0.001_prd.rofs2.V01
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 96 blocks
TIME : Write time : 00:00:32
PPM Write done
CFL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

===Flashing [CNT]===
Erase : Processing 891CF60F_RM588_50.0.001_002_U293.uda.fpsx
Erasing....
Erasing Data....
Erase area : 0x09E60000 - 0x0F47FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
CFL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

Write : Processing 891CF60F_RM588_50.0.001_002_U293.uda.fpsx
Total writen 82 blocks
TIME : Write time : 00:00:28
CNT Write done
CFL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

CFL: Close_Session
Content: 000300000000060000000600000000
CFL: Reboot

Flashing done!
Total flash time : 00:03:44
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5230
Software Info: V ICPR72_11w10.1 15-03-11 RM-588 (c) Nokia
IMEI: 12345610654321?
Ape Version: V 50.0.001
Product code:
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:04:30
Connect phone on selected interface...

Engiess · 11-18-2013, 21:14

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 14F001145FA300525C333E0BCCD40DDBC6DB4EDA
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15

ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done!

CFL: Close_Session
Content: 000300000000060000000600000000
CFL: Reboot

-> No any Flex keys selected, skip flex part

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Engiess · 11-18-2013, 21:17

Connected phone - Nokia 5230
Software ver : V ICPR72_11w10.1 15-03-11 RM-588 (c) Nokia
IMEI : 355353046133751
XappVer : 000006D6
Ape Ver : V 50.0.001
APE Var : V 50.0.001V 50.0.001
APE ADSP: 256
DSP Ver : ICPR72_10w43
APE Test: eno_version
PPM :
CNT : 50.0.001_002_U293
Product SN : 0
Product code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 16
Tahvo : 22
Batery: 3723 mV
APE HW: 256
Lock info ===========
IMEI : 355353046133751
IMEI spNet : 3A 55 53 03 64 31 73 05
IMEI svNet : 33 55 53 03 64 31 73 25 F3

Unable to read Lock table...

CRT308 Backup Created

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Damaged!!!!!
Security status : Ok
PA_SimLock Version :
PA_SL phone detected

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

sagez gsm1 · 11-18-2013, 21:32

not write simlock ..phone take local mode and restore simlock (pm)

Engiess · 11-18-2013, 22:05

You mean I should not write simlock only simlock pm

Dzirt · 11-18-2013, 22:13

1. Download FULL firmware.
2. If you not made "restore SL" or pm/full rpl backup - need RPL.

Engiess · 11-18-2013, 22:23

I have download full firmware but the problem is unable to restore Sl please give me procedure to do it 1 backup rpl 2 I erase 3 I flash please what next to revive my phone

zeerik · 11-19-2013, 15:32

Quote:

Originally Posted by Engiess

nokia 5230 was came to me today with flashing problem but after flash, English language not in phone option i decided to download the same product code but version is low then i erase the phone after erase i flash it back but after write rpl phone show sim not valid

sir i think english language is present in every nokia firmware .....some firmware show chinese language after flash as 5230 (5233) u only need to set language from setting ......as for as not try to erase or downgrade sl3 models....sorry if i am wrong

danishalnoor · 11-19-2013, 18:06

in your 1st post you successfully restore your phone,, also your screen shot show that your phone restored and the simlock data is ok
your phone show sim not valid because your phone is locked and u see this also in your screen shot and your backup rpl too
so whats you want more?
and in your last post you says u did not manage to write Sl data....
did u write full rpl with Sl data?
plz post full logs

Engiess · 11-20-2013, 10:36

At last I done the phone but not only best I used ,I used cyclone to finish the job but mr dzirt please make auto recovery backup,because I read many post that the encounter this problem after erase with best

Dzirt · 11-20-2013, 10:58

Enough press Cancel om RPL selection dialogut.

11-18-2013, 20:51	#1 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	mr Dzirt help me out nokia 5230 was came to me today with flashing problem but after flash, English language not in phone option i decided to download the same product code but version is low then i erase the phone after erase i flash it back but after write rpl phone show sim not valid

11-18-2013, 20:55	#2 (permalink)
sagez gsm1 No Life Poster Join Date: Dec 2010 Location: saqez - iran Posts: 563 Member: 1474571 Status: Offline Sonork: 100.1614377 Thanks Meter: 72	please log best .. bro

11-18-2013, 21:06	#3 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	this is th rpl of the phone 355353046133751 - Download - 4shared

11-18-2013, 21:13	#4 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	Selected FlashSettings : Cold Flash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-588_50.0.001_prd.core.C00 PPM : RM-588_50.0.001_prd.rofs2.V01 CNT : 891CF60F_RM588_50.0.001_002_U293.uda.fpsx Flashing phone now... Rules accepted for : RAPIDO Generation Check files done... -> SWversion check skipped : Dead mode selected - > Force ColdFlash mode Connection opened successfully Waiting for communication response... [BootRom] : 1st boot Ok! ASIC ID: 000000010000022600010006400C192101051103 CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 14F001145FA300525C333E0BCCD40DDBC6DB4EDA ASIC MODE ID: 00 ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371 ROM ID: 4B9B75103E691FF8 Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:00 Reopening the connection... CFL: Wait for Loader take control ... CFL: Check mode Phone ready, boot Ok TransReq set Ok PAPUBkeys : Blank (Erased or HW failure) CFL: phone is in flash mode === SW Version Check === - > Can not collect initial info, continue flashing... - > Hope, this version will be ok === SW Version Check === ===Flashing [MCU]=== Erase : Processing RM-588_50.0.001_prd.core.C00 Partitioning.... Partitioning Ok... Erasing.... Erasing Data.... Erase area : 0x00040000 - 0x00082FFF , CMT , NAND Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND Erase area : 0x00400000 - 0x007FFFFF , CMT , NAND Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND Erase Partition Partition 0x0A Erase Ok... TIME : Erase time : 00:00:01 CFL: Request programm status NAND status : 00000006 / 00000006 / 00000000 Write : Processing RM-588_50.0.001_prd.core.C00 CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [SOSUPDAPP] CMT: Writing Hash CERT [SOSENO] CMT: Writing Hash CERT [SOSDSP0] CMT: Writing Hash CERT [SOSISASW] CMT: Writing Hash CERT [SOS+CORE] CMT: Writing Hash CERT [SOS+ROFS1] Total writen 436 blocks TIME : Write time : 00:02:41 MCU Write done CFL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ===Flashing [PPM]=== Erase : Processing RM-588_50.0.001_prd.rofs2.V01 Erasing.... Erasing Data.... Erase area : 0x06FE0000 - 0x0915FFFF , CMT , NAND Erase Ok... TIME : Erase time : 00:00:00 CFL: Request programm status NAND status : 00000006 / 00000006 / 00000000 Write : Processing RM-588_50.0.001_prd.rofs2.V01 CMT: Writing Hash CERT [SOS+ROFS2] Total writen 96 blocks TIME : Write time : 00:00:32 PPM Write done CFL: Request programm status NAND status : 00000006 / 00000006 / 00000000 ===Flashing [CNT]=== Erase : Processing 891CF60F_RM588_50.0.001_002_U293.uda.fpsx Erasing.... Erasing Data.... Erase area : 0x09E60000 - 0x0F47FFFF , CMT , NAND Erase Ok... TIME : Erase time : 00:00:00 CFL: Request programm status NAND status : 00000006 / 00000006 / 00000000 Write : Processing 891CF60F_RM588_50.0.001_002_U293.uda.fpsx Total writen 82 blocks TIME : Write time : 00:00:28 CNT Write done CFL: Request programm status NAND status : 00000006 / 00000006 / 00000000 CFL: Close_Session Content: 000300000000060000000600000000 CFL: Reboot Flashing done! Total flash time : 00:03:44 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 5230 Software Info: V ICPR72_11w10.1 15-03-11 RM-588 (c) Nokia IMEI: 12345610654321? Ape Version: V 50.0.001 Product code: Wait, when phone will be ready ... Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Processing After Flash Defaults... FullFactorySet... Ok! UserDataDefaultsSet...OK! ServiceDefaultsSet... Ok! LeaveDefaultsSet... Ok! ProductTuneSet...OK! SwUpgradeSet...OK! Battery voltage is enough for start Set phone to Normal mode... AfterFlash operations done ;D Done! Elapsed: 00:04:30 Connect phone on selected interface...

11-18-2013, 21:14	#5 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	Will Write RPL keys now... Check RPL file... NPC Data found! (CMT) CCC Data found! (CMT) HWC Data found! (CMT) Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BootRom] : 1st boot Ok! ASIC ID: 000000010000022600010006400C192101051103 CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 14F001145FA300525C333E0BCCD40DDBC6DB4EDA ASIC MODE ID: 00 ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371 ROM ID: 4B9B75103E691FF8 Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0 Processing RAWLOADER... FLIC : 004000EC Req : XSR 1.6 Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 12.8.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:00 Reopening the connection... CFL: Wait for Loader take control ... CFL: Check mode Phone ready, boot Ok TransReq set Ok PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15 ADL: Preparing for write certificates... Erase NPC... Ok Writing NPC... Ok Erase CCC... Ok Writing CCC... Ok Erase HWC... Ok Writing HWC... Ok ADL: Writing Flash certs done! CFL: Close_Session Content: 000300000000060000000600000000 CFL: Reboot -> No any Flex keys selected, skip flex part Done! Phone disconected! Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok

11-18-2013, 21:17	#6 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	Connected phone - Nokia 5230 Software ver : V ICPR72_11w10.1 15-03-11 RM-588 (c) Nokia IMEI : 355353046133751 XappVer : 000006D6 Ape Ver : V 50.0.001 APE Var : V 50.0.001V 50.0.001 APE ADSP: 256 DSP Ver : ICPR72_10w43 APE Test: eno_version PPM : CNT : 50.0.001_002_U293 Product SN : 0 Product code : Long Prod.SN : 0 Hardware info======= HWID : Retu : 16 Tahvo : 22 Batery: 3723 mV APE HW: 256 Lock info =========== IMEI : 355353046133751 IMEI spNet : 3A 55 53 03 64 31 73 05 IMEI svNet : 33 55 53 03 64 31 73 25 F3 Unable to read Lock table... CRT308 Backup Created SDD key status : Damaged!!!!! CMLA Key status : Not Present SimLock status : Damaged!!!!! Security status : Ok PA_SimLock Version : PA_SL phone detected User code : Crypted UserDataExLevel : Low [Gallery] , FullFlash method Done!

11-18-2013, 21:32	#7 (permalink)
sagez gsm1 No Life Poster Join Date: Dec 2010 Location: saqez - iran Posts: 563 Member: 1474571 Status: Offline Sonork: 100.1614377 Thanks Meter: 72	not write simlock ..phone take local mode and restore simlock (pm)

11-18-2013, 22:05	#8 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	You mean I should not write simlock only simlock pm

11-18-2013, 22:13	#9 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	1. Download FULL firmware. 2. If you not made "restore SL" or pm/full rpl backup - need RPL.

11-18-2013, 22:23	#10 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	I have download full firmware but the problem is unable to restore Sl please give me procedure to do it 1 backup rpl 2 I erase 3 I flash please what next to revive my phone

11-19-2013, 18:06	#12 (permalink)
danishalnoor No Life Poster Join Date: Dec 2007 Location: Pakistan Lower Dir kpk Posts: 583 Member: 651892 Status: Offline Thanks Meter: 205	in your 1st post you successfully restore your phone,, also your screen shot show that your phone restored and the simlock data is ok your phone show sim not valid because your phone is locked and u see this also in your screen shot and your backup rpl too so whats you want more? and in your last post you says u did not manage to write Sl data.... did u write full rpl with Sl data? plz post full logs

11-20-2013, 10:36	#13 (permalink)
Engiess No Life Poster Join Date: Mar 2011 Location: NIGERIA Posts: 1,185 Member: 1540810 Status: Offline Sonork: 100.1627394 Thanks Meter: 161	At last I done the phone but not only best I used ,I used cyclone to finish the job but mr dzirt please make auto recovery backup,because I read many post that the encounter this problem after erase with best

11-20-2013, 10:58	#14 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Enough press Cancel om RPL selection dialogut.