Nokia 130 RM1037 unlock - GSM-Forum

apkfone · 11-15-2016, 16:18

Hi all i am trying to unlock a Nokia 130 RM1037 the question is how do you do it?

I have the usb 130 service cable and i can flash the phone fine.

If i try Upload job under Mediatek i get this error

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 697 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : EA4A43C76187DF2694CAE6B8E0D47E42
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.02.11.p1
BROM/BL stage done
Configure RAMINIT Ok
Reading flash now ...
Done!
Read Ok
Collect initial info

IMEI : 3**7****796****
UID : F4F3****BCF1****
Get Security Info Ok

SimLock : Closed
Sl Conf : 800000000004000-B
Country : United Kingdom
Operator : O2
PA_SIMLOCK : PA_SL30 [ NCK : 20 Digits ]
SL30 20 digits phone detected. Unlock not possible. Stopping operation!!!

It is my understanding that infinity box full supports Nokia 130.

http://forum.gsmhosting.com/vbb/f641...-more-1870725/

Dick Ngukah · 11-17-2016, 16:07

Thanks I try and I am done successful

JayDi · 11-18-2016, 19:33

Quote:

Originally Posted by apkfone

Hi all i am trying to unlock a Nokia 130 RM1037 the question is how do you do it?

I have the usb 130 service cable and i can flash the phone fine.

If i try Upload job under Mediatek i get this error

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 697 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : EA4A43C76187DF2694CAE6B8E0D47E42
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.02.11.p1
BROM/BL stage done
Configure RAMINIT Ok
Reading flash now ...
Done!
Read Ok
Collect initial info

IMEI : 3**7****796****
UID : F4F3****BCF1****
Get Security Info Ok

SimLock : Closed
Sl Conf : 800000000004000-B
Country : United Kingdom
Operator : O2
PA_SIMLOCK : PA_SL30 [ NCK : 20 Digits ]
SL30 20 digits phone detected. Unlock not possible. Stopping operation!!!

It is my understanding that infinity box full supports Nokia 130.

http://forum.gsmhosting.com/vbb/f641...-more-1870725/

SP unlock for 15 and 20 digits phones supported in v2.25

apkfone · 11-24-2016, 16:50

Hi v2.25 and it is still say it cannot unlock on a 108.

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 101 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 624744D638AB575D1A99269DCD5B9AA5
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA0_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A7000-0x003F3FFF , LEN : 0x0004D000
Read Ok
Collect initial info

IMEI : 3
UID : 8
Get Security Info Ok

SimLock : Closed
Sl Conf : 800000000004000-B
Country : Portugal
Operator : OPTIMUS
PA_SIMLOCK : PA_SL30 [ NCK : 20 Digits ]
SL30 20 digits phone detected. Unlock not possible. Stopping operation!!!

Connect phone on selected interface...

**wgmmmx1** · 11-24-2016, 18:15

Do you use mediatek tab and press fast direct unlock button there ?
Phone must be turned on and comunicated with sw before you start unlock for this you need special nokia 108 cable.

NST-Thina · 06-07-2018, 12:50

why this error Infinity Dongle

Husseinkagawa · 11-20-2019, 08:39

hello unlocking now is supported
must know ur carrier n country only
visit www.galaxyunlocks.com

redbaronn · 01-06-2020, 08:58

Quote:

Originally Posted by wgmmmx1

Do you use mediatek tab and press fast direct unlock button there ?
Phone must be turned on and comunicated with sw before you start unlock for this you need special nokia 108 cable.

Please give me a link for this cable.

Thanks!

11-15-2016, 16:18	#1 (permalink)
apkfone Freak Poster Join Date: Mar 2016 Location: united kingdom Posts: 158 Member: 2549105 Status: Offline Thanks Meter: 4	Nokia 130 RM1037 unlock Hi all i am trying to unlock a Nokia 130 RM1037 the question is how do you do it? I have the usb 130 service cable and i can flash the phone fine. If i try Upload job under Mediatek i get this error --- Insert USB cable now! --- Wait for phone... Phone found! [ 697 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : EA4A43C76187DF2694CAE6B8E0D47E42 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.10.02.11.p1 BROM/BL stage done Configure RAMINIT Ok Reading flash now ... Done! Read Ok Collect initial info IMEI : 37796 UID : F4F3BCF1** Get Security Info Ok SimLock : Closed Sl Conf : 800000000004000-B Country : United Kingdom Operator : O2 PA_SIMLOCK : PA_SL30 [ NCK : 20 Digits ] SL30 20 digits phone detected. Unlock not possible. Stopping operation!!! It is my understanding that infinity box full supports Nokia 130. http://forum.gsmhosting.com/vbb/f641...-more-1870725/

06-07-2018, 12:50	#6 (permalink)
NST-Thina Freak Poster Join Date: Apr 2015 Location: @kilinochchi, Sri Lanka Posts: 128 Member: 2372779 Status: Offline Sonork: 100.1680276 Thanks Meter: 33	Hi why this error Infinity Dongle

11-17-2016, 16:07	#2 (permalink)
Dick Ngukah Junior Member Join Date: May 2016 Posts: 4 Member: 2573587 Status: Offline Thanks Meter: 0	Thanks I try and I am done successful

11-24-2016, 16:50	#4 (permalink)
apkfone Freak Poster Join Date: Mar 2016 Location: united kingdom Posts: 158 Member: 2549105 Status: Offline Thanks Meter: 4	Hi v2.25 and it is still say it cannot unlock on a 108. Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 101 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 625A BB_CPU_HW : CA01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6250_S0001 BB_CPU_SN : 624744D638AB575D1A99269DCD5B9AA5 BROM Protocol Version : 05 BROM Status : 1012 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : Bree.20.06.11.p4 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA0_eMP_Bree.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88 DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00400000 FAT_RANGE : 0x003A7000-0x003F3FFF , LEN : 0x0004D000 Read Ok Collect initial info IMEI : 3 UID : 8 Get Security Info Ok SimLock : Closed Sl Conf : 800000000004000-B Country : Portugal Operator : OPTIMUS PA_SIMLOCK : PA_SL30 [ NCK : 20 Digits ] SL30 20 digits phone detected. Unlock not possible. Stopping operation!!! Connect phone on selected interface...

11-24-2016, 18:15	#5 (permalink)
wgmmmx1 Moderator Join Date: Oct 2009 Location: Poland Age: 42 Posts: 10,174 Member: 1139057 Status: Offline Sonork: 100.109924 Thanks Meter: 4,428	Do you use mediatek tab and press fast direct unlock button there ? Phone must be turned on and comunicated with sw before you start unlock for this you need special nokia 108 cable.

11-20-2019, 08:39	#7 (permalink)
Husseinkagawa Insane Poster Join Date: Mar 2015 Posts: 95 Member: 2363135 Status: Offline Thanks Meter: 11	hello unlocking now is supported must know ur carrier n country only visit www.galaxyunlocks.com