Nokia 206 After flash contact Service Any solution . - GSM-Forum

Akhtar Ali Jatt · 01-04-2015, 10:53

Nokia 206 After flash contact Service Any solution .

Quote:

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 351729060056586
IMEI 2 : 351729060056594
PCcode : 059Q4M0

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351729060056586_XG 213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm872__04.52.mcusw
Image : rm872__04.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:00:46
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:35
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xFA4D

===Flashing [PPM]===
File : rm872__04.52.ppm_m2
Image : package_m2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ...
Erase done, time : 00:00:07
Write , Start : 0x41A80000 , Len : 0x003C68F0
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0xC9E6

===Flashing [CNT]===
File : rm872__04.52.image_m2_059Q4J7
Image : package_m2_059Q4J7.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ...
Erase done, time : 00:00:39
Write , Start : 0x42100000 , Len : 0x01040000
Flashing , wait ...
Region flash done, time : 00:00:21
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip
CRC check passed , 0x5521

Flashing done!
Total flash time : 00:02:43
Reboot phone now...

Reading Phone Info....
Connected phone - 206
Software Info: V 04.52 30-06-13 RM-872 (c) Nokia
IMEI: 351729060056586
PPM version : V 04.52 30-06-13 RM-872 (c) Nokia M2
Product code:
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock Damaged!!!!!

Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
AfterFlash operations done ;D
Done!

Dzirt · 01-04-2015, 11:02

It was dead before flash. Try fix sl.

Akhtar Ali Jatt · 01-04-2015, 11:23

Sl fix possible for this model ?

i am getting this error

Quote:

ADL mode not support such operation, break

Error on SPR reading

Connect phone on selected interface...

pradeep_kus · 01-04-2015, 11:41

Quote:

Originally Posted by Akhtar Ali Jatt

Sl fix possible for this model ?

i am getting this error

Bro If Not Help With Sl Fix, Rpl Only

Too Costly For Spend this Set

EjazATF · 01-04-2015, 12:06

Dear, if you have done RPL BACKUP before flashing this phone then re-write the RPL backup on this phone using ATF.

Akhtar Ali Jatt · 01-04-2015, 12:46

Quote:

Originally Posted by pradeep_kus

Bro If Not Help With Sl Fix, Rpl Only

Too Costly For Spend this Set

Rpl is too expensive bro looking for sim lock solution

Quote:

Originally Posted by EjazATF

Dear, if you have done RPL BACKUP before flashing this phone then re-write the RPL backup on this phone using ATF.

No Backup just only made by best before flashing set was already in contact service .

pradeep_kus · 01-04-2015, 14:25

Quote:

Originally Posted by Akhtar Ali Jatt

Rpl is too expensive bro looking for sim lock solution

No Backup just only made by best before flashing set was already in contact service .

No-Solution Right Now For Repair Sim Lock !

Dzirt · 01-04-2015, 15:08

Quote:

Originally Posted by EjazATF

Dear, if you have done RPL BACKUP before flashing this phone then re-write the RPL backup on this phone using ATF.

And no one care, can it write RPL to Xgold or not

Yeah, continue in such way to get ban in this section.

Quote:

Originally Posted by Akhtar Ali Jatt

Rpl is too expensive bro looking for sim lock solution

No Backup just only made by best before flashing set was already in contact service .

BEST can readout RPL on completely dead set. And restore to any Xgold phone as well. If backup is alive.
It can fix SimLock on some phone by reset/fix counter button. If something still alive inside.

jawad munir · 01-05-2015, 07:00

Quote:

Originally Posted by Akhtar Ali Jatt

Nokia 206 After flash contact Service Any solution .

which RM< flashed rm-872 or 873??????

try and other RM and then see and post result here pls

BR
Jawad Munir

Akhtar Ali Jatt · 01-05-2015, 07:25

Quote:

Originally Posted by Dzirt

BEST can readout RPL on completely dead set. And restore to any Xgold phone as well. If backup is alive.
It can fix SimLock on some phone by reset/fix counter button. If something still alive inside.

Quote:

Checkings and reset counters...
Can't find lock info, if it PA_SL - use Repair SL
All done

Not fixed with rest/fix counter

Dzirt · 01-05-2015, 13:56

So, bad luck then. It just spare parts.
If field 120 is alive - exist chance rebuild it with RPL+PM, but chance is near zero and take much time.

01-04-2015, 11:02	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	It was dead before flash. Try fix sl.

01-04-2015, 12:06	#5 (permalink)
EjazATF No Life Poster Join Date: May 2014 Location: D.I.Khan [KPK] Age: 34 Posts: 1,598 Member: 2192499 Status: Offline Sonork: Stopped using.. Thanks Meter: 1,763	Dear, if you have done RPL BACKUP before flashing this phone then re-write the RPL backup on this phone using ATF.

01-05-2015, 13:56	#11 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	So, bad luck then. It just spare parts. If field 120 is alive - exist chance rebuild it with RPL+PM, but chance is near zero and take much time.