Nokia 215 (MediaTek 6260) Flashing via BEST ;) - GSM-Forum

JayDi · 02-16-2015, 14:23

Download firmware :

Code:

IDM initializing, wait...
Checking access to Products folder...
Folder for RM-1110 not exist. Attempt to create
Prepare done, collect info
[Query] : RM-1110_ROM_eMP_10.01.11 , 1,62 MB 
[Query] : RM-1110_VIVA_eMP_10.01.11 , 4,11 MB 
[Query] : RM-1110_LANG_PACK_ROM_EI_eMP_10.01.11_001 , 4,77 MB 
[Query] : RM-1110_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001 , 104,03 KB 
[Query] : RM-1110_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001 , 1,15 KB 
[Query] : RM1110_059W6J3_10.01.11_013.vpl , 4,47 KB 
[Query] : RM-1110_IMAGE_eMP_059W6J3_care_10.01.11_001.cfg , 3,10 KB 
Files to download : 7
Total size to download : 10,61 MB
Downloading now, please, wait...
[Download] : RM-1110_ROM_eMP_10.01.11
[Download] : RM-1110_VIVA_eMP_10.01.11
[Download] : RM-1110_LANG_PACK_ROM_EI_eMP_10.01.11_001
[Download] : RM-1110_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
[Download] : RM-1110_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
[Download] : RM1110_059W6J3_10.01.11_013.vpl
[Download] : RM-1110_IMAGE_eMP_059W6J3_care_10.01.11_001.cfg
Verify files now ..... 
[Verify Ok] : RM-1110_IMAGE_eMP_059W6J3_care_10.01.11_001.cfg
[Verify Ok] : RM-1110_ROM_eMP_10.01.11
[Verify Ok] : RM-1110_LANG_PACK_ROM_EI_eMP_10.01.11_001
[Verify Ok] : RM-1110_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
[Verify Ok] : RM-1110_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
[Verify Ok] : RM-1110_VIVA_eMP_10.01.11
All done, all files were downloaded!

Flash it!

Code:

Core : v2.02 , MTKx FlashEngine : v6.9

Verify files ... 
MAUI : RM-1110_ROM_eMP_10.01.11
VIVA : RM-1110_VIVA_eMP_10.01.11
LANG : RM-1110_LANG_PACK_ROM_EI_eMP_10.01.11_001
CUST : RM-1110_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
JMPT : RM-1110_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 52 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 92CF35B1EADB3D34498D76D363741F87
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : JET.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Sirrah.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
SecureDecrypt : RM-1110_ROM_eMP_10.01.11
SecureDecrypt : RM-1110_VIVA_eMP_10.01.11
SecureDecrypt : RM-1110_LANG_PACK_ROM_EI_eMP_10.01.11_001
SecureDecrypt : RM-1110_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
SecureDecrypt : RM-1110_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : JET.10.01.11.p1
 === Backup Enabled
Reading RPL backup...
Read Error : Not allowed
 === Backup 
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1110_ROM_eMP_10.01.11
Write : RM-1110_LANG_PACK_ROM_EI_eMP_10.01.11_001
Write : RM-1110_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
Write : RM-1110_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
Write : RM-1110_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1110_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1110_LANG_PACK_ROM_EI_eMP_10.01.11_001
[VERIFY] DONE : RM-1110_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
[VERIFY] DONE : RM-1110_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
[VERIFY] DONE : RM-1110_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:51
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:     10.01.11 00-00-00 RM-1110
IMEI:  356482063174825
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :   EI
Product code:  059W6H2
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...

Read info , check result :

Code:

Phone found!
MTKx Nokia Phone detected
Read info... Ok


Reading Phone Info....
Software ver : 10.01.11 00-00-00 RM-1110
IMEI 1  :      356482063174825
IMEI 2  :      356482063174833
XappVer :      000007E4
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM     :      EI
CNT     :      JET.10.01.11.p1
Product SN   :     6503253AU
Product code :     059W6H2
Base Prd.code:     059W5S5
Module code  :     0206364
Hardware info=======
HWID  : 1000
LCDVer: TPO
Lock info ===========
IMEI       : 356482063174825
IMEI spNet : 3A 65 84 02 36 71 84 52 

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

SimLock status : Ok
Security status : Ok

Done!

Execuring SelfTests
Passed  :  Camera_If Test
Passed  :  Display Test
Passed  :  Keyboard_Short_Circuit Test
Passed  :  MicroSD_Short_Circuit Test
Passed  :  Sim_Short_Circuit Test
Done

No need seek firmware , just few clicks and you have result.
BEST - ultimate Nokia MTK solution

JayDi · 02-16-2015, 14:36

Nokia 215 , Safe UserCode Reset :

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 52 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 92CF35B1EADB3D34498D76D363741F87
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...

All UserData remains untouched.

JayDi · 02-16-2015, 14:44

Nokia 215 , safe FS Format :

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 52 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 92CF35B1EADB3D34498D76D363741F87
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : JET.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Sirrah.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
Executing FFS FORMAT now...
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Connect phone on selected interface...

Phone found!
MTKx Nokia Phone detected
Read info... Ok

More features ( RPL , SP Unlock , Flash Read , PhoneBook ) for this line- RM-1110, RM-1111 , RM-1112 will follow in next BEST version.

JayDi · 02-20-2015, 12:56

Read Flash :

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 52 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 92CF35B1EADB3D34498D76D363741F87
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : JET.10.01.11.p1
BROM/BL stage done
Configure RAMINIT Ok
Reading flash now ... 
Done!

Control Block Validation (Security Test) : 
CBR is Ok, match with BB SN. Phone Security is Alive :)
Mobile Info : 
IMEI  : 356482063174825
BBUID : 92CF35B1EADB3D34498D76D363741F87
SimLock Info : 
STATE : OPENED ( NOT LOCKED )

Dump Saved to : 356482063174825_MTK.bin
RPL Saved to : 356482063174825_MTK.mtsec

Read Done!

Connect phone on selected interface...

Extract Phone Book :

Code:

[MTK] : Extract PhoneBook from file : 356482063174825_MTK.bin
[PROJECT] : JET
[PROCESS] : Sorting Data [1/3]
[PROCESS] : Extract Data [2/3]
[PROCESS] : Decrypt Data [3/3]
[EXTRACT] : Ok, 21 records found!
Saved to : D:\356482063174825_MTK.csv
Done

anil21589 · 04-05-2015, 08:13

I am Sucessfully flash Nokia 108. 220. 225 With Best dongle.

emilkawa · 04-08-2015, 16:53

...firmware for nokia 215 rm-1110?

Emilkawa

Dzirt · 04-08-2015, 17:04

Quote:

Originally Posted by emilkawa

...firmware for nokia 215 rm-1110?

Emilkawa

In first post all explained.
BEST have own Firmware Manager with over 1.200.000 file links inside. Download manager and navigator included also. Need just select need FW and press "Download" , after SW will open need flashing tab and select firmware. Need just press "Flash" and that is all.

emilkawa · 04-08-2015, 17:29

Quote:

Originally Posted by Dzirt

In first post all explained.
BEST have own Firmware Manager with over 1.200.000 file links inside. Download manager and navigator included also. Need just select need FW and press "Download" , after SW will open need flashing tab and select firmware. Need just press "Flash" and that is all.

Maybe I'm so tired or blind but I can't find Firmware Manager in BEST and on support of Infinity. Can you explane where is it?
emilkawa

.... of course i'm blind. Thank you, I see now.

habeebkambrath · 04-08-2015, 17:36

If you want firmware use navifirm+ for downloading the firmware....

Dzirt · 04-08-2015, 17:42

Quote:

Originally Posted by emilkawa

Maybe I'm so tired or blind but I can't find Firmware Manager in BEST and on support of Infinity. Can you explane where is it?
emilkawa

.... of course i'm blind. Thank you, I see now.

Tab is called "NaviManager" , Need select all 3 drop down lists (Model,Version,Region/PC) to see "download" button.

Quote:

Originally Posted by habeebkambrath

If you want firmware use navifirm+ for downloading the firmware....

Continue use it , if not seen anything other. But spam with your pity advises somewhere else.

emilkawa · 04-08-2015, 17:48

can't swith to flash mode. why?
stil powering on in normal mode

Code:

Core : v2.05 , MTKx FlashEngine : v7.2

Verify files ... 
MAUI : RM-1110_ROM_eMP_10.01.11
VIVA : RM-1110_VIVA_eMP_10.01.11
LANG : RM-1110_LANG_PACK_ROM_EA_eMP_10.01.11_001
CUST : RM-1110_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_001
JMPT : RM-1110_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_001
 - > MODE : FullFlash
Software Info:     10.01.11 00-00-00 RM-1110
IMEI:  3564820xxxxxxxxxx
PPM version :   AD
Product code:  059W6J0
Rebooting phone to FlashMode...
Wait for phone...
Device boot not done
Check Drivers
Try again 

Boot Error
Flashing failed!
Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok

Dzirt · 04-08-2015, 17:51

@emilkawa , check about Nokia Serial Driver installed.
It on support : Index of pub/software/Drivers/
According system type.
MTK_USB_Serial_Port_Driver_x64
MTK_USB_Serial_Port_Driver_x86

mahi20015 · 05-01-2015, 13:32

i not found firmware plz help me thanks

Dzirt · 05-01-2015, 13:52

Quote:

Originally Posted by mahi20015

i not found firmware plz help me thanks

Don't make over9000 post, otherwise you will be banned.
Answer given here : http://forum.gsmhosting.com/vbb/f641.../#post11023516

If you not have BEST dongle - bring phone to service center. They know what to do and how. you will seek it few year more in such style.

>>PakFones<< · 06-01-2015, 12:23

Flashing

Code:

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 58 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : B685FEFAB6F86D95B6C7D22720DB12D5
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : JET.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Jet.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
SecureDecrypt : RM-1110_ROM_eMP_12.03.11
SecureDecrypt : RM-1110_VIVA_eMP_12.03.11
SecureDecrypt : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
SecureDecrypt : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
SecureDecrypt : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
OVRLP : 000069B900000001
PHPID : JET.10.01.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1110_ROM_eMP_12.03.11
Write : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
Write : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
Write : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
Write : RM-1110_VIVA_eMP_12.03.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1110_ROM_eMP_12.03.11
[VERIFY] DONE : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_VIVA_eMP_12.03.11
CODE_VERIFY : Ok
FORMAT FFS : skipped
Rebooting phone now

Flashing done!
Total flash time : 00:02:44
Reboot phone Ok

Connect phone on selected interface...

Format

Code:

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 58 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : B685FEFAB6F86D95B6C7D22720DB12D5
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : JET.12.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Jet.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
Executing FFS FORMAT now...
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Connect phone on selected interface...

04-08-2015, 16:53	#6 (permalink)
emilkawa Freak Poster Join Date: Feb 2005 Location: Poland Posts: 447 Member: 112498 Status: Offline Thanks Meter: 33	where can i find... ...firmware for nokia 215 rm-1110? Emilkawa

04-05-2015, 08:13	#5 (permalink)
anil21589 Major Poster Join Date: Jun 2011 Location: India Posts: 45 Member: 1599104 Status: Offline Thanks Meter: 6	I am Sucessfully flash Nokia 108. 220. 225 With Best dongle.

04-08-2015, 17:36	#9 (permalink)
habeebkambrath Banned Join Date: Nov 2012 Location: unknown Posts: 748 Member: 1837438 Status: Offline Sonork: unknown Thanks Meter: 659	If you want firmware use navifirm+ for downloading the firmware....

04-08-2015, 17:51	#12 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	@emilkawa , check about Nokia Serial Driver installed. It on support : Index of pub/software/Drivers/ According system type. MTK_USB_Serial_Port_Driver_x64 MTK_USB_Serial_Port_Driver_x86

05-01-2015, 13:32	#13 (permalink)
mahi20015 No Life Poster Join Date: Jan 2015 Posts: 4,253 Member: 2325887 Status: Offline Thanks Meter: 134	i not found firmware plz help me thanks