Nokia 220 RM-969 stuck on BL Mode - GSM-Forum

Vortune_labs · 02-05-2015, 01:55

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 75 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : ECDC548E3C41DE2B761EF9C4C1A8BFAB
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]

Stuck on BL Mode

PASSIONATE_BOYS · 02-05-2015, 08:27

Hello,
What was the initial condition of the phone?
Try with Repair Mode enabled.

Br.

Vortune_labs · 02-05-2015, 12:55

Condition stuck only in logo sir

syed tuqeer · 02-07-2015, 09:05

Hello,
use fully charged battery
try again, post result...........

zakiyyboss · 03-16-2016, 18:16

Am getting same PRoblem...

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 421 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : E35EBEF5D7D97ACAF6ECB98CB6CA749E
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]

After the phone get on on NOKIA logo... stuck there... Windows Detect Nokia 220 (Rm 969 ) with ? sign...

On same Computer i successfully flashed a RM-1035:

Quote:

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 421 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : F8EC987860716314825FCE10F54BAA2B
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.01.11
SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.01.11
Write : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001
Write : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001
Write : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001
Write : RM-1035_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:00
Reboot phone Ok

JayDi · 03-16-2016, 20:18

Probably - battery inside bad.
Probably - CPU inside bad.
Probably - can be enough just resilder it.
Probably - it dead completely.

zakiyyboss · 03-17-2016, 07:31

Quote:

Originally Posted by JayDi

Probably - battery inside bad.
Probably - CPU inside bad.
Probably - can be enough just resilder it.
Probably - it dead completely.

hello thanks.. I reflow CPU + Battery connector and see the results:

Quote:

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 421 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : E35EBEF5D7D97ACAF6ECB98CB6CA749E
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
SecureDecrypt : RM-969_ROM_eMP_30.06.11
SecureDecrypt : RM-969_VIVA_eMP_30.06.11
SecureDecrypt : RM-969_LANG_PACK_ROM_MH_eMP_30.06.11_001
SecureDecrypt : RM-969_CUSTPACK_ROM_MH_INDIA_IN_eMP_30.06.11_001
SecureDecrypt : RM-969_JUMP_TABLE_MH_INDIA_IN_eMP_30.06.11_001
OVRLP : 000069B900000001
PHPID : Rivendell.10.03.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-969_ROM_eMP_30.06.11
Write : RM-969_LANG_PACK_ROM_MH_eMP_30.06.11_001
Write : RM-969_CUSTPACK_ROM_MH_INDIA_IN_eMP_30.06.11_001
Write : RM-969_JUMP_TABLE_MH_INDIA_IN_eMP_30.06.11_001
Write : RM-969_VIVA_eMP_30.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-969_ROM_eMP_30.06.11
[VERIFY] DONE : RM-969_LANG_PACK_ROM_MH_eMP_30.06.11_001
[VERIFY] DONE : RM-969_CUSTPACK_ROM_MH_INDIA_IN_eMP_30.06.11_001
[VERIFY] DONE : RM-969_JUMP_TABLE_MH_INDIA_IN_eMP_30.06.11_001
[VERIFY] DONE : RM-969_VIVA_eMP_30.06.11
CODE_VERIFY : Ok
Will Upload FAT Image now
Write : RM-969_FATIMAGE_MH_30.06.11
FAT Image Flash done!
FAT Verify Ok
Rebooting phone now

Flashing done!
Total flash time : 00:04:14
Reboot phone Ok

02-05-2015, 01:55	#1 (permalink)
Vortune_labs Freak Poster Join Date: Oct 2005 Location: Melbourne Aussy Posts: 323 Member: 192176 Status: Offline Sonork: 100.1646924 Thanks Meter: 35	Nokia 220 RM-969 stuck on BL Mode --- Insert USB cable now! --- Wait for phone... Phone found! [ 75 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 625A BB_CPU_HW : CA01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6250_S0001 BB_CPU_SN : ECDC548E3C41DE2B761EF9C4C1A8BFAB BROM Protocol Version : 05 BROM Status : 1012 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Stuck on BL Mode

02-05-2015, 08:27	#2 (permalink)
PASSIONATE_BOYS No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support- Posts: 9,321 Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361	Hello, What was the initial condition of the phone? Try with Repair Mode enabled. Br.

02-05-2015, 12:55	#3 (permalink)
Vortune_labs Freak Poster Join Date: Oct 2005 Location: Melbourne Aussy Posts: 323 Member: 192176 Status: Offline Sonork: 100.1646924 Thanks Meter: 35	Condition stuck only in logo sir

02-07-2015, 09:05	#4 (permalink)
syed tuqeer No Life Poster Join Date: Dec 2007 Location: PAKISTAN Posts: 8,860 Member: 654997 Status: Offline Sonork: 1613804(Don't Spam Plz) Thanks Meter: 4,073	Hello, use fully charged battery try again, post result...........

03-16-2016, 20:18	#6 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Probably - battery inside bad. Probably - CPU inside bad. Probably - can be enough just resilder it. Probably - it dead completely.