Nokia 503s read bf file - GSM-Forum

ontopgsm · 08-05-2014, 14:09

Hello! I could not read BF file from this phone. I managed to read it with a box which will be nameless for now, I sent it to a BF server and it didn't find the code so the file was broken from the beginning. Please help as I have this phone for a limited time.

Dzirt · 08-05-2014, 23:05

Hello.
Post logs from reading with BEST.

ontopgsm · 08-06-2014, 10:34

Here is log file. "DIE Verify" is already checked.
##########################

Code:

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    503s
Software ver : V 12.1.6 21-11-13 RM-920 (c) Nokia           
IMEI    :      35899605XXXXXXX
XappVer :      00000794
APE Var :      0000000000000000000000000000000000000000
PPM     :      8ce69e25bf2988f1605a928fde1c17e2641ef409
CNT     :      
Product SN   :     4DAAD40BH
Product code :     059V6Z4
Base Prd.code:     059S205
Module code  :     0205680
Long Prod.SN :     0
Hardware info=======
HWID  : 1000
Tahvo : RM-920-12.1.6-059V6Z4-12.1.4-12.1.4
Batery: 4018 mV
CMT BT: 19e2-4702H10
LCDVer: TPO
Lock info ===========
IMEI       : 35899605XXXXXXX
IMEI spNet : 3A 85 99 06 35 14 24 05 
IMEI svNet : 33 85 99 06 35 14 24 25 F7 

Sl Conf  : 226-10-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 3E8FD8ED7D9859BE
Country      : Romania
Operator     : RO ORANGE

Lock info:
Block 1
L1:Close;  

CRT308 Backup Created

CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : not set
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Phone Imei: 35899605XXXXXXX
Checking locks...
Sl Conf  : 226-10-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 3E8FD8ED7D9859BE
Country      : Romania
Operator     : RO ORANGE

Lock info:
Block 1
L1:Close;  

Check communication with phone....
Communication verify done... Preparing...
Reboot....

-> If Phone start charge - just reinsert battery fast

Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len  : 0x16
IF xCPUID    : XGOLD 618 [XMM6180 QUARK]
IF uCHIPID    :  50A908120024E610
IF Resp Data  :  50A9070100030101

Wait for user action : Insert battery

Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : QUARK_1315.400_M1S1
QUARK EEP config Ok
FLASHID : 20004000 , [ MuxOneNAND ]
Boot conf set, Target Ready
Boot done!
Check RSA started...
Check RSA failed :(
- > Go to Settings -> "DIE Verify" , Check it and repeat Read LBF/Upload job again!
Error...!

Connect phone on selected interface...

Dzirt · 08-06-2014, 12:36

Aha, now disable "RSA" check and give me read log file. We will proceed it and check.

ontopgsm · 08-06-2014, 13:38

I worked but there is no guarantee that those files are good (no offense). The files the other box generated I know for a fact that are wrong but still.

Code:

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    503s
Software ver : V 12.1.6 21-11-13 RM-920 (c) Nokia           
IMEI    :      35899605XXXXXXX
XappVer :      00000794
APE Var :      0000000000000000000000000000000000000000
PPM     :      8ce69e25bf2988f1605a928fde1c17e2641ef409
CNT     :      
Product SN   :     4DAAD40BH
Product code :     059V6Z4
Base Prd.code:     059S205
Module code  :     0205680
Long Prod.SN :     0
Hardware info=======
HWID  : 1000
Tahvo : RM-920-12.1.6-059V6Z4-12.1.4-12.1.4
Batery: 4063 mV
CMT BT: 19e2-4702H10
LCDVer: TPO
Lock info ===========
IMEI       : 35899605XXXXXXX
IMEI spNet : 3A 85 99 06 35 14 24 05 
IMEI svNet : 33 85 99 06 35 14 24 25 F7 

Sl Conf  : 226-10-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 3E8FD8ED7D9859BE
Country      : Romania
Operator     : RO ORANGE

Lock info:
Block 1
L1:Close;  

CRT308 Backup Created

CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : not set
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Phone Imei: 35899605XXXXXXX
Checking locks...
Sl Conf  : 226-10-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 3E8FD8ED7D9859BE
Country      : Romania
Operator     : RO ORANGE

Lock info:
Block 1
L1:Close;  

Check communication with phone....
Communication verify done... Preparing...
Reboot....

-> If Phone start charge - just reinsert battery fast

Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len  : 0x16
IF xCPUID    : XGOLD 618 [XMM6180 QUARK]
IF uCHIPID    :  50A908120024E610
IF Resp Data  :  50A9070100030101

Wait for user action : Insert battery

Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : QUARK_1315.400_M1S1
QUARK EEP config Ok
FLASHID : 20004000 , [ MuxOneNAND ]
Boot conf set, Target Ready
Boot done!
Check RSA procedure disabled by user setting...
Create Log file for local calculation...
File c:\InfinityBox\BEST\Local_calc\35899605XXXXXXX.bcl created - Ok
File c:\InfinityBox\BEST\Local_calc\oclHashcat_35899605XXXXXXX_32.bat created - Ok
File c:\InfinityBox\BEST\Local_calc\oclHashcat_35899605XXXXXXX_64.bat created - Ok
Done!

Connect phone on selected interface...

Dzirt · 08-06-2014, 14:11

Just give me that file

Also PM file from this phone and RPL backup.

ontopgsm · 08-06-2014, 15:12

Link is in your PM. Thanks.

Dzirt · 08-07-2014, 16:15

Bad luck.
AshaOs security differ from normal XG618 phones.
Will try explore it more, but not sure. Take some time. Probably - much.

ontopgsm · 08-08-2014, 08:14

Is there anything useful to you I can do to this phone such as reading full flash before I send it to it's owner via courier?

Dzirt · 08-08-2014, 11:16

Quote:

Originally Posted by ontopgsm

Is there anything useful to you I can do to this phone such as reading full flash before I send it to it's owner via courier?

Yes, dump will be useful , if it have some phonebook records and messages

ontopgsm · 08-08-2014, 12:36

I swear this is the dumbest phone ever. I imported a 44 contacts phonebook but it turns out it only says contacts got imported, in reality they don't. Ignoring that I tried to read the full flash and surprise it doesn't work.

Code:

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    503s
Software ver : V 12.1.6 21-11-13 RM-920 (c) Nokia           
IMEI    :      35899605XXXXXXX
XappVer :      00000794
APE Var :      0000000000000000000000000000000000000000
PPM     :      8ce69e25bf2988f1605a928fde1c17e2641ef409
CNT     :      
Product SN   :     4DAAD40BH
Product code :     059V6Z4
Base Prd.code:     059S205
Module code  :     0205680
Long Prod.SN :     0
Hardware info=======
HWID  : 1000
Tahvo : RM-920-12.1.6-059V6Z4-12.1.4-12.1.4
Batery: 3894 mV
CMT BT: 19e2-4702H10
LCDVer: TPO
Lock info ===========
IMEI       : 35899605XXXXXXX
IMEI spNet : 3A 85 99 06 35 14 24 05 
IMEI svNet : 33 85 99 06 35 14 24 25 F7 

Sl Conf  : 226-10-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 3E8FD8ED7D9859BE
Country      : Romania
Operator     : RO ORANGE

Lock info:
Block 1
L1:Close;  

CRT308 Backup Created

CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : not set
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!


ADL mode not support such operation, break


ADL mode not support such operation, break

Set phone in Local mode...
Restarting...

ADL mode not support such operation, break

Done!

Set phone in Test mode...
Restarting...
Done!


ADL mode not support such operation, break

Set phone in Normal mode...
Restarting...

Done!
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok


ADL mode not support such operation, break

No matter the mode (local/test/normal) I always get this "ADL mode not support such operation, break"

Dzirt · 08-08-2014, 12:40

Need select correct generation in FlashRead - XG618 Generic and select model after. It required for all XG618.
XG221 , XG213 not require that.

ontopgsm · 08-08-2014, 13:28

You are right. It's dumping flash now but a unusually slow speed. When it's done I'm gonna give you the link in private. I hope it's of some help to you as is because it seems that this phone doesn't hold phonebook and messages. It's really weird.

Dzirt · 08-08-2014, 13:33

Yes, speed not fast. But it better, than nothing

Ok, thanks. It will help me a lot.

ontopgsm · 08-08-2014, 15:50

Link is in PM.
MD5 is E66F8F2AEAD97DBD37814F970D7EED4B
Thanks.

08-05-2014, 14:09	#1 (permalink)
ontopgsm Freak Poster Join Date: Nov 2007 Posts: 180 Member: 626209 Status: Offline Thanks Meter: 42	Nokia 503s read bf file Hello! I could not read BF file from this phone. I managed to read it with a box which will be nameless for now, I sent it to a BF server and it didn't find the code so the file was broken from the beginning. Please help as I have this phone for a limited time.

08-05-2014, 23:05	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Hello. Post logs from reading with BEST.

08-06-2014, 12:36	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Aha, now disable "RSA" check and give me read log file. We will proceed it and check.

08-06-2014, 14:11	#6 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Just give me that file Also PM file from this phone and RPL backup.

08-06-2014, 15:12	#7 (permalink)
ontopgsm Freak Poster Join Date: Nov 2007 Posts: 180 Member: 626209 Status: Offline Thanks Meter: 42	Link is in your PM. Thanks.

08-07-2014, 16:15	#8 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Bad luck. AshaOs security differ from normal XG618 phones. Will try explore it more, but not sure. Take some time. Probably - much.

08-08-2014, 08:14	#9 (permalink)
ontopgsm Freak Poster Join Date: Nov 2007 Posts: 180 Member: 626209 Status: Offline Thanks Meter: 42	Is there anything useful to you I can do to this phone such as reading full flash before I send it to it's owner via courier?

08-08-2014, 12:40	#12 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Need select correct generation in FlashRead - XG618 Generic and select model after. It required for all XG618. XG221 , XG213 not require that.

08-08-2014, 13:28	#13 (permalink)
ontopgsm Freak Poster Join Date: Nov 2007 Posts: 180 Member: 626209 Status: Offline Thanks Meter: 42	You are right. It's dumping flash now but a unusually slow speed. When it's done I'm gonna give you the link in private. I hope it's of some help to you as is because it seems that this phone doesn't hold phonebook and messages. It's really weird.

08-08-2014, 13:33	#14 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Yes, speed not fast. But it better, than nothing Ok, thanks. It will help me a lot.

08-08-2014, 15:50	#15 (permalink)
ontopgsm Freak Poster Join Date: Nov 2007 Posts: 180 Member: 626209 Status: Offline Thanks Meter: 42	Link is in PM. MD5 is E66F8F2AEAD97DBD37814F970D7EED4B Thanks.