GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle
Reload this Page nokia 6120c after flash hang on nokia logo
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
 
LinkBack Thread Tools Display Modes
Old 01-19-2015, 09:15   #1 (permalink)
Freak Poster
 
Join Date: Sep 2008
Location: quetta
Posts: 228
Member: 855330
Status: Offline
Thanks Meter: 14
Donate money to this user
nokia 6120c after flash hang on nokia logo

i received 6120 rm 243 version 7.02 only call problem a flashed with 7.20 version in dead mode after flash mobile only show nokia logo then white and off plz help what is the solution ??? and also not going to local mode

here is the logs

Connect phone on selected interface...

Core : v2.00a , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm243_07.20_prd_core.fpsx
PPM : rm243_07.20_prd_vB21_01_mea_b.fpsx
CNT : rm243_07.20_prd_UDA_Classic_Red.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPIDO Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---

-------BOOT BREAKED BY USER-------

-> Phone not found..
-> Boot fail...
Flashing failed...


Core : v2.00a , BB5XG FlashEngine : v9.9

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm243_07.20_prd_core.fpsx
PPM : rm243_07.20_prd_vB21_01_mea_b.fpsx
CNT : rm243_07.20_prd_UDA_Classic_Red.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPIDO Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101021105
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1530020668C80158A0F21F42F5C1BDDC06684E78
ASIC MODE ID: 00
ROOT KEY HASH: F2D76DFAFD66C7F195F278417DF05888
ROM ID: A8C1D6713E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP ...
Processing PASUBTOC ...
Boot Done!
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
ADL Server confirm flashmode!
Get req info : empty
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm243_07.20_prd_core.fpsx
Found 3 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x0087FFFF, NAND, CMT
Result: 0000
Erasing area 0x00B80000 - 0x04DFFFFF, NAND, CMT
Result: 0000
Partition erase not allowed by loader
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_core.fpsx
Total 404 [404/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS*CORE]
CMT : Writing Hash CERT [SOS+ROFS]
TIME : Write time : 00:01:12
MCU Write done
===Flashing [PPM]===
Erase : Processing rm243_07.20_prd_vB21_01_mea_b.fpsx
Found 1 areas to erase
Erasing area 0x03300000 - 0x04DFFFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_vB21_01_mea_b.fpsx
Total 164 [164/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFX]
TIME : Write time : 00:00:34
PPM Write done
===Flashing [CNT]===
Erase : Processing rm243_07.20_prd_UDA_Classic_Red.fpsx
Found 1 areas to erase
Erasing area 0x04E00000 - 0x07B3FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_UDA_Classic_Red.fpsx
Total 1 [1/0/0] blocks to write, writing...
TIME : Write time : 00:00:00
CNT Write done
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:01:48
Reboot phone now...

- > AfterFlash Failed! Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:03:45
Connect phone on selected interface...
  Reply With Quote
Old 01-19-2015, 09:21   #2 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,860
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 4,073
Hello,
Download "ENO" flash file from BEST NaviManager
flash phone
post result/Logs.
  Reply With Quote
Old 01-19-2015, 09:50   #3 (permalink)
Freak Poster
 
Join Date: Sep 2008
Location: quetta
Posts: 228
Member: 855330
Status: Offline
Thanks Meter: 14
Donate money to this user
i flashed with eno but same problem nokia comes then white screen and also not going properly to local mode its on nokia blinking
  Reply With Quote
Old 01-19-2015, 10:02   #4 (permalink)
No Life Poster
 
Dzirt's Avatar
 
Join Date: Nov 2009
Location: Syberia
Age: 34
Posts: 12,508
Member: 1157320
Status: Offline
Thanks Meter: 6,192
Flash full firmware with eno latest version and it will power on and work as should.
  Reply With Quote
Old 01-19-2015, 10:04   #5 (permalink)
No Life Poster
 
LOKEMUNFU's Avatar
 
Join Date: Jan 2014
Posts: 542
Member: 2100013
Status: Offline
Thanks Meter: 125
Quote:
Originally Posted by ahmad rahimi View Post
i flashed with eno but same problem nokia comes then white screen and also not going properly to local mode its on nokia blinking
FLASHING WITH complete firmware + ENO
Upload log



[Note]
In case
Yet before FLASHING
The phone can not enter
LOCAL or test mode
Definitely hardware related
  Reply With Quote
Old 01-19-2015, 10:06   #6 (permalink)
Freak Poster
 
Join Date: Sep 2008
Location: quetta
Posts: 228
Member: 855330
Status: Offline
Thanks Meter: 14
Donate money to this user
Quote:
Originally Posted by Dzirt View Post
Flash full firmware with eno latest version and it will power on and work as should.
can u give me link of new version eno i have version 7.20 firmware
  Reply With Quote
Old 01-19-2015, 10:12   #7 (permalink)
Freak Poster
 
Join Date: Sep 2008
Location: quetta
Posts: 228
Member: 855330
Status: Offline
Thanks Meter: 14
Donate money to this user
i flashed with full firmware 4 files with eno same result phone blinking on nokia before flash mobile was on and working

here is the log


Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm243_07.20_prd_core.fpsx
PPM : rm243_07.20_prd_vB08_01_hebrew.fpsx
CNT : rm243_07.20_prd_UDA_Pearl_White.fpsx
APE : rm243_ENO_A_2009wk15v0.100.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPIDO Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101021105
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1530020668C80158A0F21F42F5C1BDDC06684E78
ASIC MODE ID: 00
ROOT KEY HASH: F2D76DFAFD66C7F195F278417DF05888
ROM ID: A8C1D6713E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP ...
Processing PASUBTOC ...
Boot Done!
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL Server confirm flashmode!
Get req info : empty
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm243_07.20_prd_core.fpsx
Found 3 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x0087FFFF, NAND, CMT
Result: 0000
Erasing area 0x00B80000 - 0x04DFFFFF, NAND, CMT
Result: 0000
Partition erase not allowed by loader
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_core.fpsx
Total 404 [404/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS*CORE]
CMT : Writing Hash CERT [SOS+ROFS]
TIME : Write time : 00:01:11
MCU Write done
===Flashing [PPM]===
Erase : Processing rm243_07.20_prd_vB08_01_hebrew.fpsx
Found 1 areas to erase
Erasing area 0x03300000 - 0x04DFFFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_vB08_01_hebrew.fpsx
Total 185 [185/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFX]
TIME : Write time : 00:00:38
PPM Write done
===Flashing [CNT]===
Erase : Processing rm243_07.20_prd_UDA_Pearl_White.fpsx
Found 1 areas to erase
Erasing area 0x04E00000 - 0x07B3FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_UDA_Pearl_White.fpsx
Total 1 [1/0/0] blocks to write, writing...
TIME : Write time : 00:00:00
CNT Write done
===Flashing [APE]===
Erase : Processing rm243_ENO_A_2009wk15v0.100.fpsx
Found 1 areas to erase
Erasing area 0x00880000 - 0x00B7FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_ENO_A_2009wk15v0.100.fpsx
Total 18 [18/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS*ENO]
TIME : Write time : 00:00:02
APE Write done
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:01:54
Reboot phone now...
  Reply With Quote
Old 01-19-2015, 10:39   #8 (permalink)
No Life Poster
 
LOKEMUNFU's Avatar
 
Join Date: Jan 2014
Posts: 542
Member: 2100013
Status: Offline
Thanks Meter: 125
TRY............blank_504KB_pmm_10

http://forum.gsmhosting.com/vbb/f641...-mode-1606818/
  Reply With Quote
Old 01-19-2015, 11:41   #9 (permalink)
Freak Poster
 
Join Date: Sep 2008
Location: quetta
Posts: 228
Member: 855330
Status: Offline
Thanks Meter: 14
Donate money to this user
Quote:
Originally Posted by LOKEMUNFU View Post
i also tried with this file not solved
  Reply With Quote
Old 01-19-2015, 12:01   #10 (permalink)
Junior Member
 
Join Date: Jun 2013
Posts: 31
Member: 1961467
Status: Offline
Thanks Meter: 3
remove camra and then full flash again
  Reply With Quote
Old 01-19-2015, 12:54   #11 (permalink)
Freak Poster
 
Join Date: Sep 2008
Location: quetta
Posts: 228
Member: 855330
Status: Offline
Thanks Meter: 14
Donate money to this user
i flashed full firmware eno blank pmm nothing works any other solution plz help dzirt or any other experts
  Reply With Quote
Old 01-19-2015, 13:04   #12 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,860
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 4,073
http://forum.gsmhosting.com/vbb/f641...c-how-1363981/
  Reply With Quote
Old 01-19-2015, 13:17   #13 (permalink)
No Life Poster
 
LOKEMUNFU's Avatar
 
Join Date: Jan 2014
Posts: 542
Member: 2100013
Status: Offline
Thanks Meter: 125
Quote:
Originally Posted by ahmad rahimi View Post
i flashed full firmware eno blank pmm nothing works any other solution plz help dzirt or any other experts
http://forum.gsmhosting.com/vbb/f641...c-how-1363981/


If this approach is not effective /

Check hardware /


Remember FLASHING not fix hardware failures





Also such type of operation can be used for rebuild sw in phone - if exist some bugs, non-stable work and much others.
For BACKUP RPL from DEAD phones can be used this way :
*.1st step: Backup NPC (it very important - by USB - RAPU11, RAPU21, RAP4, BCM, or Fbus - RAPIDO, RAP3... )
*.2nd step: Erase NPC ( Erase mode - select NPC/CCC/HWC )
*.- If local exist - do READ PM , READ RPL. SIMLOCK SAVED - It is critical part. Now can be done Erase and anything else.
*.- If no Local exist - Flash LATEST WS version, ENO. If local will be - READ PM, READ RPL. SIMLOCK SAVED - It is critical part. Now can be done Erase and anything else.
*.- If still no local - better digg HW first.
  Reply With Quote
The Following User Says Thank You to LOKEMUNFU For This Useful Post:
Reply

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 03:21.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.25176 seconds with 8 queries

SEO by vBSEO