Nokia 6303CI Simlock write error help - GSM-Forum

UzUnlocker · 09-10-2015, 09:11

Hello for Best Team .

i'am need help .
Extract RPL + SIMLOCK DATA log

Code:

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000010000022600000001020C192102054100
CPU ID :       RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     19800207ED0300499DD3CBCBE7869528E18D75E8
ASIC MODE ID:  00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID:        67E82268F29CEA60
Use RAP3Gv40_2nd.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D
ADL: phone is in flash mode

Reading NPC certificate...
IMEI : 352682046678990
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\352682046678990_CRT.rpl

Trying read spr block , wait ...
Get phone data...
Get flash data...
SPR Read Ok!
Spr saved to : 352682046678990.spr

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Processing SimLock extraction....
Checking readed data, wait few seconds
ID_INFO : 10.80/21-01-11/RM-638
#1st block Ok [SLT]
#2nd block Ok [SHA]
#3rd block Ok [SIG]
Initial data found, start fun...
SimLock RPL saved : c:\InfinityBox\BEST\Backup\Cert\352682046678990_SIM.rpl
SimLock PM  saved : c:\InfinityBox\BEST\Backup\Cert\352682046678990_SIM.pm
Done!

Flashing logs

Code:

Core : v2.10 , BB5XG FlashEngine : v9.9

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm638__10.80.mcusw
PPM : rm638__10.80.ppm_i
CNT : rm638__10.80.image_i_0593998_010
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000010000022600000001020C192102054100
CPU ID :       RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     19800207ED0300499DD3CBCBE7869528E18D75E8
ASIC MODE ID:  00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID:        67E82268F29CEA60
Use RAP3Gv40_2nd.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352682046678990
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\352682046678990_CRT_2nd.rpl


 === SW Version Check === 
- > REFLASHING
 === SW Version Check === 

   ===Flashing [MCU]===
Erase : Processing rm638__10.80.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm638__10.80.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 126 blocks
TIME : Write time : 00:00:33 
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm638__10.80.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm638__10.80.ppm_i
Total writen 25 blocks
TIME : Write time : 00:00:07 
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm638__10.80.image_i_0593998_010
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm638__10.80.image_i_0593998_010
Total writen 100 blocks
TIME : Write time : 00:00:31 
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:14
Reboot phone now...

-------AFTER FLASH BREAKED BY USER-------

 - > AfterFlash Failed! :( Reason : Downgrade try or HW Error
     Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Erase Flash + Flash phone logs

Code:

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000010000022600000001020C192102054100
CPU ID :       RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     19800207ED0300499DD3CBCBE7869528E18D75E8
ASIC MODE ID:  00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID:        67E82268F29CEA60
Use RAP3Gv40_2nd.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D

Reading NPC certificate...
IMEI : 352682046678990
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\352682046678990_CRT_2nd.rpl


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x07FFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:00 

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Code:

Core : v2.10 , BB5XG FlashEngine : v9.9

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm638__10.80.mcusw
PPM : rm638__10.80.ppm_i
CNT : rm638__10.80.image_i_0593998_010
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000010000022600000001020C192102054100
CPU ID :       RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     19800207ED0300499DD3CBCBE7869528E18D75E8
ASIC MODE ID:  00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID:        67E82268F29CEA60
Use RAP3Gv40_2nd.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...

 - > No any CRT data (MCU damaged/CERT erased), skip saving


 === SW Version Check === 
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
 === SW Version Check === 

   ===Flashing [MCU]===
Erase : Processing rm638__10.80.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm638__10.80.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 126 blocks
TIME : Write time : 00:00:33 
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm638__10.80.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm638__10.80.ppm_i
Total writen 25 blocks
TIME : Write time : 00:00:07 
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm638__10.80.image_i_0593998_010
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm638__10.80.image_i_0593998_010
Total writen 100 blocks
TIME : Write time : 00:00:31 
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:14
Reboot phone now...

-------AFTER FLASH BREAKED BY USER-------

 - > AfterFlash Failed! :( Reason : Downgrade try or HW Error
     Anyway - try reinsert battery and PowerUp phone manualy

After flash phone not start & i'am solve this problem ( Change camera module )
.

Writing simlock error log

Code:

Reading Phone Info....
Connected phone -    Nokia 6303i classic
Software ver : V 10.80 21-01-11 RM-638 (c) Nokia            
IMEI    :      352682046678990
XappVer :      00000834
DSP Ver :      SPR91_09w09_11w02
PPM     :      V 10.80 21-01-11 RM-638 (c) Nokia             I
CNT     :      Content: i_0593998 V 10.80 21-01-11 RM-638 (c) Nokia            
Product SN   :     0
Product code :     
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 4209 mV
CMT BT: 1673-46038
LCDVer: SEIKO
Lock info ===========
IMEI       : 352682046678990
IMEI spNet : 3A 25 86 02 64 76 98 09 
IMEI svNet : 33 25 86 02 64 76 98 69 F5 

Unable to read Lock table... :(
CRT308 Backup Created

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Damaged!!!!!
Security status : Ok
PA_SimLock Version : 
PA_SL phone detected

User code : Crypted
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Operating mode is OK, no need change...

Field 120
   Record 0 write - Ok
   Record 1 write - Ok
   Record 2 write - Ok
   Record 3 write - Ok

Done!

Elapsed: 00:00:00

Reading Phone Info....
Connected phone -    Nokia 6303i classic
Software ver : V 10.80 21-01-11 RM-638 (c) Nokia            
IMEI    :      352682046678990
XappVer :      00000834
DSP Ver :      SPR91_09w09_11w02
PPM     :      V 10.80 21-01-11 RM-638 (c) Nokia             I
CNT     :      Content: i_0593998 V 10.80 21-01-11 RM-638 (c) Nokia            
Product SN   :     0
Product code :     
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 4221 mV
CMT BT: 1673-46038
LCDVer: SEIKO
Lock info ===========
IMEI       : 352682046678990
IMEI spNet : 3A 25 86 02 64 76 98 09 
IMEI svNet : 33 25 86 02 64 76 98 69 F5 

Unable to read Lock table... :(
CRT308 Backup Created

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Damaged!!!!!
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Will Write RPL keys now...
Check RPL file...
SIMLOCK Data found!
SIMLOCK KEY found!
No any part for write! check file, Write Settings

Will Write RPL keys now...
Check RPL file...
SIMLOCK Data found!
SIMLOCK KEY found!
-> Skip Flash keys Part, for Flash Part use Dead Mode!!!!!

Writing SimLock Key...   Error!
Writing SimLock Data...  Error!

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok


Done!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
SIMLOCK Data found!
SIMLOCK KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000010000022600000001020C192102054100
CPU ID :       RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     19800207ED0300499DD3CBCBE7869528E18D75E8
ASIC MODE ID:  00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID:        67E82268F29CEA60
Use RAP3Gv40_2nd.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D
ADL: Preparing for write certificates...


ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key...   Error!
Writing SimLock Data...  Error!

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok


Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Mr.Jaydi help me solve this problem .
(sorry for my bad english .)

Link SIMLOCK PM / RPL backups

JayDi · 09-10-2015, 10:45

I need SPR file, not a pm/rpl file.

UzUnlocker · 09-10-2015, 10:48

SPR FILE LINK 352682046678990.rar

UzUnlocker · 09-10-2015, 12:03

Mr.JayDi
is it possible in any way to restore the phone?

JayDi · 09-10-2015, 13:44

I will check it today. Normally - I not proceed spr files since 2 years or so.

UzUnlocker · 09-11-2015, 03:15

Quote:

Originally Posted by JayDi

I will check it today. Normally - I not proceed spr files since 2 years or so.

Is there any progress on my problem?

UzUnlocker · 09-18-2015, 03:29

Should I wait for news of my problem? the client is waiting for, as it were.

ribbentrop · 09-18-2015, 04:17

Have you tried to write CERT via FBUS cable?

09-10-2015, 10:45	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	I need SPR file, not a pm/rpl file.

09-10-2015, 10:48	#3 (permalink)
UzUnlocker No Life Poster Join Date: Apr 2013 Location: Uzbekistan / Bukhara Posts: 702 Member: 1912005 Status: Offline Sonork: 100.1658592 Thanks Meter: 622	SPR FILE LINK 352682046678990.rar

09-10-2015, 12:03	#4 (permalink)
UzUnlocker No Life Poster Join Date: Apr 2013 Location: Uzbekistan / Bukhara Posts: 702 Member: 1912005 Status: Offline Sonork: 100.1658592 Thanks Meter: 622	Mr.JayDi is it possible in any way to restore the phone?

09-10-2015, 13:44	#5 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	I will check it today. Normally - I not proceed spr files since 2 years or so.

09-18-2015, 03:29	#7 (permalink)
UzUnlocker No Life Poster Join Date: Apr 2013 Location: Uzbekistan / Bukhara Posts: 702 Member: 1912005 Status: Offline Sonork: 100.1658592 Thanks Meter: 622	Should I wait for news of my problem? the client is waiting for, as it were.

09-18-2015, 04:17	#8 (permalink)
ribbentrop No Life Poster Join Date: Sep 2003 Location: Ukraine Age: 51 Posts: 4,616 Member: 40400 Status: Offline Thanks Meter: 1,250	Have you tried to write CERT via FBUS cable?