nokia Asha 201 test mode problem

[crysst]

Hello, I have next problem, i try to put one nokia Asha 201 in test mode,because have security code , and want to reset , or preferable read this code for not lose the information.
I hit the READ RPL button with XG213 selected, enter usb cable in phone, the phone enter in test mode, the drivers instal, have one com , and one modem comport, but the program cannot read the rest of information and blocked.......i try to read the information with ATF, with Cyclone, BEST nokia.....no box cannot comunicate with phone. What I do wrong? I supose is a drivers problem, but how solve this?
Thanks in advance.

[mogrem.soft]

Originally Posted by crysst

Hello, I have next problem, i try to put one nokia Asha 201 in test mode,because have security code , and want to reset , or preferable read this code for not lose the information.
I hit the READ RPL button with XG213 selected, enter usb cable in phone, the phone enter in test mode, the drivers instal, have one com , and one modem comport, but the program cannot read the rest of information and blocked.......i try to read the information with ATF, with Cyclone, BEST nokia.....no box cannot comunicate with phone. What I do wrong? I supose is a drivers problem, but how solve this?
Thanks in advance.

see, try to flash set but Skip Cnt (user area) Flashing then After Flash done phon will be in test mode now u can read info or read phon book

and can read full flash bin. there are many ways to keep user data

[Dzirt]

Just flash MCU any version.
After phone will allow connect to it and do anything.

[crysst]

Originally Posted by mogrem.soft

see, try to flash set but Skip Cnt (user area) Flashing then After Flash done phon will be in test mode now u can read info or read phon book

and can read full flash bin. there are many ways to keep user data

I think this method work on a BB5 models like C3, but not work on Infineon.

[crysst]

here is a photo....see drivers in the device manager, is ok



Now the program Best is blocked, the only option to work is to remove the USB cable, or restart the software.

[Dzirt]

Did you try read my post?

[crysst]

Originally Posted by Dzirt

Did you try read my post?

The phone is from a boy who suicide....the family want to unlock this phone without lost any information like dial list, receive call list, sms sent and receive....if i will flash MCU i will probably lost all of this.

[mohammadhadi]

Originally Posted by crysst

The phone is from a boy who suicide....the family want to unlock this phone without lost any information like dial list, receive call list, sms sent and receive....if i will flash MCU i will probably lost all of this.

Hi
If sim have no pin, for review dilal and receive list just put sim into old sony ericsson lik k750 k800 w810 etc and you can see all of them

[crysst]

the phone dont have any sim inside....when start the keypad is locked with passcode and apear 33 missed calls

[Dzirt]

Just do as I said.
FLASH ANY mcu file for this phone, after will be STABLE local.
Backup phonebook, sms, all, what needed.
Select in BEST also option SafeFlash will flash phone without any byte of user data lost.

[aliyousafzai]

bro use atf box and read code also possible with mxbox or mxkey

[crysst]

Originally Posted by aliyousafzai

bro use atf box and read code also possible with mxbox or mxkey

with the ATF, the same problem

http://forum.gsmhosting.com/vbb/f609...oblem-1537810/

[crysst]

Originally Posted by Dzirt

Just do as I said.
FLASH ANY mcu file for this phone, after will be STABLE local.
Backup phonebook, sms, all, what needed.
Select in BEST also option SafeFlash will flash phone without any byte of user data lost.

First of all, if I will flash a diferent MCU then phone have, then the phone will not start....if the phone will not start how I will see the missing call?

[aliyousafzai]

Originally Posted by crysst

with the ATF, the same problem

http://forum.gsmhosting.com/vbb/f609...oblem-1537810/

you try with fbus??????

[crysst]

Originally Posted by aliyousafzai

you try with fbus??????

Asha 201 with Fbus? have you ATF?....you cannot do anything with ATF to Asha 201 with Fbus....only USB is posible.
Please try to do answer afther check if posible.