Nokia n96 problem ?? - GSM-Forum

vmin81 · 02-21-2011, 07:56

the nokia n96 show (( phone start-up failed contact the retailer )) and here

the log with best :

card found: S/N xxxxxxxxxx
registered to: xxxxxxxxxx

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia N96-1
Software ver : V ICPR72_09w13.2 19-05-09 RM-247 (c) Nokia
IMEI : 354863024278387
Ape Ver : 30.033
APE Var : 30.03330.033.010.130.033.098.1
APE ADSP: 0
DSP Ver : MC_4032_ICPR72_09w13
APE Test: ENOSW_4032_PR11.0835_003
PPM :
CNT : V 40.2009.25.xx PRD
Product SN : CHH742017
Product code : 0567011
Base Prd.code: 0542934
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 1001
Retu : 15
Tahvo : 22
Batery: 3672 mV
Camera:
CMT BT:
APE BT:
APE HW: 0
LCDVer: 1083227
RF ic :
Lock info ===========
IMEI : 354863024278387
IMEI spNet : 3A 45 68 03 42 72 38 08
IMEI svNet : 33 45 68 03 42 72 38 08 F8

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created...

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

i flashed ok and format it ok but the results same phone start-up failed

any solution for him ??

vmin81 · 02-21-2011, 08:00

d.jain · 02-21-2011, 08:03

write good pm with sx4 auth server

vmin81 · 02-21-2011, 08:10

Quote:

Originally Posted by d.jain

write good pm with sx4 auth server

thanxx for help and waiitng mr- DIZRT and mr-MOHSIN what they say

Mohsin-* · 02-21-2011, 09:23

Hello

Repair SD , Tick Use Custom Key and Local SX4 Auth and Upload Tune

Br

vmin81 · 02-21-2011, 09:32

Quote:

Originally Posted by mohsin-*

Hello

Repair SD , Tick Use Custom Key and Local SX4 Auth and Upload Tune

Br

i can do it with USB or it must FBUS

Mohsin-* · 02-21-2011, 09:34

Quote:

Originally Posted by vmin81

i can do it with USB or it must FBUS

Rap3V2 not Possible Now With USb in BEST But Hope In future Update Team Add This Facility

Now U need To Use FBus For Hole Operation

Br

vmin81 · 02-21-2011, 10:49

Quote:

Originally Posted by mohsin-*

Rap3V2 not Possible Now With USb in BEST But Hope In future Update Team Add This Facility

Now U need To Use FBus For Hole Operation

Br

with fbus cant enter local mode just usb enter local

Mohsin-* · 02-21-2011, 11:03

use good cable ,

Br

Dzirt · 02-21-2011, 11:33

Read key once via FBUS, after can use USB.

vmin81 · 02-21-2011, 16:21

Quote:

Originally Posted by Dzirt

Read key once via FBUS, after can use USB.

i try many cables cant just usb enter test mode

Dzirt · 02-21-2011, 16:25

Check BSI resistance. It should be near 5.1-7.1 kOhm, I tested and it work Ok.

BR

vmin81 · 02-21-2011, 16:41

Quote:

Originally Posted by Dzirt

Check BSI resistance. It should be near 5.1-7.1 kOhm, I tested and it work Ok.

BR

no way without fbus sir not work with me maybe may cable problem but usb work ok no box in the world do it with usb help me plz

Dzirt · 02-21-2011, 16:51

but, if try enter phone in local manually, by pressing power button?
But i checked N96 already and it work Ok.

vmin81 · 02-21-2011, 17:53

Quote:

Originally Posted by Dzirt

but, if try enter phone in local manually, by pressing power button?
But i checked N96 already and it work Ok.

i tried not workkkkkkkkkkkkkkkk

02-21-2011, 07:56	#1 (permalink)
vmin81 No Life Poster Join Date: Jul 2006 Location: Follow Me If U Can Posts: 2,821 Member: 304251 Status: Offline Thanks Meter: 789	Nokia n96 problem ?? the nokia n96 show (( phone start-up failed contact the retailer )) and here the log with best : card found: S/N xxxxxxxxxx registered to: xxxxxxxxxx Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Reading Phone Info.... Connected phone - Nokia N96-1 Software ver : V ICPR72_09w13.2 19-05-09 RM-247 (c) Nokia IMEI : 354863024278387 Ape Ver : 30.033 APE Var : 30.03330.033.010.130.033.098.1 APE ADSP: 0 DSP Ver : MC_4032_ICPR72_09w13 APE Test: ENOSW_4032_PR11.0835_003 PPM : CNT : V 40.2009.25.xx PRD Product SN : CHH742017 Product code : 0567011 Base Prd.code: 0542934 Module code : Long Prod.SN : 0 Hardware info======= HWID : 1001 Retu : 15 Tahvo : 22 Batery: 3672 mV Camera: CMT BT: APE BT: APE HW: 0 LCDVer: 1083227 RF ic : Lock info =========== IMEI : 354863024278387 IMEI spNet : 3A 45 68 03 42 72 38 08 IMEI svNet : 33 45 68 03 42 72 38 08 F8 Conf key : 0000000000000000 Provider key : 2440700000000000 Provider : AT&T;U.S.A. (3650) Counters : Key 0 [3] , Fbus 0 [10] Blocks : 7 LOCK STATUS : ============================= BLK : 1 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 2 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 3 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 4 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 5 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 6 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 7 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open ============================= LOCKS : All Open ============================= CRT308 Backup Created... User code : Crypted UserDataExLevel : Low [Gallery] Done! i flashed ok and format it ok but the results same phone start-up failed any solution for him ??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21

02-21-2011, 08:00	#2 (permalink)
vmin81 No Life Poster Join Date: Jul 2006 Location: Follow Me If U Can Posts: 2,821 Member: 304251 Status: Offline Thanks Meter: 789	and here is the self test : Initializing Tests... IMEI : 354863024278387 , Phone : RM-247 Nokia N96-1 Get keys... PASSED \| ST_UEM_CBUS_IF_TEST PASSED \| ST_EAR_DATA_LOOP_TEST PASSED \| ST_SIM_CLK_LOOP_TEST PASSED \| ST_SIM_IO_CTRL_LOOP_TEST PASSED \| ST_SIM_LOCK_TEST ->ERROR \| ST_SECURITY_TEST PASSED \| ST_PWR_KEY_TEST PASSED \| ST_CURRENT_CONS_TEST PASSED \| ST_BACKUP_BATT_TEST PASSED \| ST_CMT_APE_WAKEUP_TEST PASSED \| ST_HOOKINT_TEST PASSED \| ST_BTEMP_TEST PASSED \| ST_MBUS_RX_TX_LOOP_TEST PASSED \| ST_EXT_DEVICE_TEST PASSED \| ST_CDSP_SLEEPCLK_FREQ_TEST NOT EXECUTED \| ST_CDSP_SLEEPCLOCK_FREQ_TEST NOT EXECUTED \| ST_CDSP_RF_BB_IF_TEST NOT EXECUTED \| ST_CDSP_RF_SUPPLY_TEST NOT EXECUTED \| ST_CDSP_TX_IQ_TEST NOT EXECUTED \| ST_CDSP_TXC_DATA_TEST NOT EXECUTED \| ST_CDSP_PWR_DETECTOR_BIAS_TEST NOT EXECUTED \| ST_CDSP_RX_PLL_PHASE_LOCK_TEST NOT RUN \| ST_CDSP_TX_PLL_PHASE_LOCK_TEST NOT RUN \| ST_CDSP_WCDMA_TX_POWER_TEST NOT RUN \| ST_CDSP_RX_IQ_LOOP_BACK_TEST NOT RUN \| ST_CDSP_GSM_TX_POWER_TEST PASSED \| ST_KEYBOARD_STUCK_TEST PASSED \| ST_LPRF_IF_TEST PASSED \| ST_CAMERA_IF_TEST PASSED \| ST_SEC_CAMERA_IF_TEST PASSED \| ST_CAMERA_AUTOFOCUS_TEST PASSED \| ST_LPRF_AUDIO_LINES_TEST PASSED \| ST_MAIN_LCD_IF_TEST PASSED \| ST_BT_WAKEUP_TEST PASSED \| ST_WLAN_TEST PASSED \| ST_BT_WLAN_COEXISTENCE_TEST PASSED \| ST_MASS_MEMORY_IF_TEST PASSED \| ST_ACCEL_IF_TEST PASSED \| ST_DVBH_TEST PASSED \| ST_APE_EM_ASIC_TEST NOT RUN \| ST_USB_LOOP_TEST PASSED \| ST_RADIO_TEST PASSED \| ST_TVOUT_IF_TEST SelfTests end

02-21-2011, 08:03	#3 (permalink)
d.jain No Life Poster Join Date: Jan 2008 Location: sai baba shirdi Age: 44 Posts: 1,776 Member: 670629 Status: Offline Sonork: 100.1590208 Thanks Meter: 431	write good pm with sx4 auth server

02-21-2011, 09:23	#5 (permalink)
Mohsin-* No Life Poster Join Date: Dec 2006 Location: Pakistan/UAE/WorldWide Posts: 8,288 Member: 417298 Status: Offline Sonork: 100.1578269 Thanks Meter: 18,268	Hello Repair SD , Tick Use Custom Key and Local SX4 Auth and Upload Tune Br

02-21-2011, 11:03	#9 (permalink)
Mohsin-* No Life Poster Join Date: Dec 2006 Location: Pakistan/UAE/WorldWide Posts: 8,288 Member: 417298 Status: Offline Sonork: 100.1578269 Thanks Meter: 18,268	use good cable , Br

02-21-2011, 11:33	#10 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Read key once via FBUS, after can use USB.

02-21-2011, 16:25	#12 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Check BSI resistance. It should be near 5.1-7.1 kOhm, I tested and it work Ok. BR

02-21-2011, 16:51	#14 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	but, if try enter phone in local manually, by pressing power button? But i checked N96 already and it work Ok.