Nokia RM-1012 flashing problem - GSM-Forum

gsm_b0y · 10-25-2014, 10:11

Please help me with this problem:

Core : v1.98 , MTKx FlashEngine : v6.0

Verify files ...
MAUI : RM-1012_ROM_eMP_10.01.11
VIVA : RM-1012_VIVA_eMP_10.01.11
LANG : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280
CUST : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280
JMPT : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 495 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 25D5E172F4FDE2B071C9C15BA4D99D16
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.21.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1012_ROM_eMP_10.01.11
SecureDecrypt : RM-1012_VIVA_eMP_10.01.11
SecureDecrypt : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280
SecureDecrypt : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280
SecureDecrypt : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280
OVRLP : 000069B900000001
PHPID : PEARL.21.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1012_ROM_eMP_10.01.11
Write : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280
Write : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280
Write : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280
Write : RM-1012_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1012_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280
[VERIFY] DONE : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280
[VERIFY] DONE : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280
[VERIFY] ERROR : RM-1012_VIVA_eMP_10.01.11
[ERROR] : SECURITY_BOOTLOADER_IMAGE_SIGNATURE_FAIL
Executing FFS FORMAT now...
Error Initialize SAFE_FORMAT Mode!
[ERROR]
Rebooting phone now

Flashing done!
Total flash time : 00:02:39
Reboot phone Ok

Connect phone on selected interface...

Now it shows only Nokia logo and blinks.

Dzirt · 10-26-2014, 12:20

Hello.
Make format FS.

Something wrong with ports/drivers seems. Will improve in next update.

gsm_b0y · 10-27-2014, 08:28

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 495 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 25D5E172F4FDE2B071C9C15BA4D99D16
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.10.01.11.p3
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Connect phone on selected interface...

phone is in the same condition...blinking

Dzirt · 10-27-2014, 14:20

Download latest SW version for that RM and flash again.
Try flash Repair MAUI and run phone after. File on support.

10-25-2014, 10:11	#1 (permalink)
gsm_b0y Freak Poster Join Date: Jan 2005 Location: GSM Center Ro Age: 20 Posts: 339 Member: 104241 Status: Offline Thanks Meter: 6	Nokia RM-1012 flashing problem Please help me with this problem: Core : v1.98 , MTKx FlashEngine : v6.0 Verify files ... MAUI : RM-1012_ROM_eMP_10.01.11 VIVA : RM-1012_VIVA_eMP_10.01.11 LANG : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280 CUST : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280 JMPT : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280 - > MODE : FullFlash Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 495 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : 25D5E172F4FDE2B071C9C15BA4D99D16 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : PEARL.21.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Pearl.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW [0] : FLASH_DIE : 00EF 0060 0018 0000 [0] : FLASH_LEN : 0x01000000 FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000 SecureDecrypt : RM-1012_ROM_eMP_10.01.11 SecureDecrypt : RM-1012_VIVA_eMP_10.01.11 SecureDecrypt : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280 SecureDecrypt : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280 SecureDecrypt : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280 OVRLP : 000069B900000001 PHPID : PEARL.21.00.11.p1 OVRLP : 00004DF900000001 DA : FORMAT_BIN Processing Flash Pre-format FILES : 5 SAFE_BLOCK : 04 FORMAT_BIN : Ok ERASE_MAUI_INFO : 0x00040000 WRITE_STYLE : DEF : 0x01 (SEQ) Write : RM-1012_ROM_eMP_10.01.11 Write : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280 Write : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280 Write : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280 Write : RM-1012_VIVA_eMP_10.01.11 CODE_DNLOAD : Ok [VERIFY] DONE : RM-1012_ROM_eMP_10.01.11 [VERIFY] DONE : RM-1012_LANG_PACK_ROM_EA_eMP_10.01.11_1015_1_b13280 [VERIFY] DONE : RM-1012_CUSTPACK_ROM_EA_EURO_PL_eMP_10.01.11_1015_1_b 13280 [VERIFY] DONE : RM-1012_JUMP_TABLE_EA_EURO_PL_eMP_10.01.11_1015_1_b13 280 [VERIFY] ERROR : RM-1012_VIVA_eMP_10.01.11 [ERROR] : SECURITY_BOOTLOADER_IMAGE_SIGNATURE_FAIL Executing FFS FORMAT now... Error Initialize SAFE_FORMAT Mode! [ERROR] Rebooting phone now Flashing done! Total flash time : 00:02:39 Reboot phone Ok Connect phone on selected interface... Now it shows only Nokia logo and blinks.

10-26-2014, 12:20	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Hello. Make format FS. Something wrong with ports/drivers seems. Will improve in next update.

10-27-2014, 08:28	#3 (permalink)
gsm_b0y Freak Poster Join Date: Jan 2005 Location: GSM Center Ro Age: 20 Posts: 339 Member: 104241 Status: Offline Thanks Meter: 6	Connect phone on selected interface... Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 495 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : 25D5E172F4FDE2B071C9C15BA4D99D16 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : PEARL.10.01.11.p3 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Pearl.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW [0] : FLASH_DIE : 00EF 0060 0018 0000 [0] : FLASH_LEN : 0x01000000 FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000 Executing FFS FORMAT now... FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Connect phone on selected interface... phone is in the same condition...blinking

10-27-2014, 14:20	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Download latest SW version for that RM and flash again. Try flash Repair MAUI and run phone after. File on support.