|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| |||||||
| Register | FAQ | Donate | Forum Rules | ★. iPhone Unlock .★ | -= JTAG BOOM =- | .: Nokia Unlock :. | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
04-12-2011, 13:33
| #1801 (permalink) |
| Freak Poster  Join Date: Dec 2007 Location: bangladesh
Posts: 347
Member: 642363 Status: Offline Thanks: 50
Thanked 37 Times in 30 Posts
| registered to: ismail hossen Connect phone on selected interface... UFS S/N 25410 boot - Ok Connect phone on selected interface... Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 2110011760644650E5FD60AE2B4558F753B83393 CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 881C0020 , CMT , NOR CMT Flash ID : 881C0020 < ST => M39L0R807 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Resetting selected items... Check phone mode... Phone in Local mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:11 Phone disconected! Connect phone on selected interface... Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 2110011760644650E5FD60AE2B4558F753B83393 CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 881C0020 , CMT , NOR CMT Flash ID : 881C0020 < ST => M39L0R807 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Resetting selected items... Check phone mode... Phone in Local mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:01:43 Reading User code... Read and Check phone data... SimLock status : SimLock Damaged!!!!!  Security status : Security Damaged!!!!! SDD Key status : read data error User Code is: not set Done! Phone disconected! Connect phone on selected interface... card found: S/N 1AEA:0118 registered to: ismail hossen Connect phone on selected interface... UFS S/N 25410 boot - Ok Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Read and Check phone data... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 2110011760644650E5FD60AE2B4558F753B83393 CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 881C0020 , CMT , NOR CMT Flash ID : 881C0020 < ST => M39L0R807 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... Connect phone on selected interface... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Resetting User Code to default (12345)... Clear data : Ok Result: 12345 Done! Resetting life Timer... Reset Done! Done Resetting selected items... Check phone mode... Phone in Local mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:11 Phone disconected! Connect phone on selected interface... card found: S/N 1AEA:0118 registered to: ismail hossen Connect phone on selected interface... UFS S/N 25410 boot - Ok Connect phone on selected interface... Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 1170000AB9785450C095909543861B5458001223 CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : B9354E81AC464DED33FC7B90295086150F45393500 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL3 phone detected Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Resetting selected items... Check phone mode... Phone already in Test mode, skip change... Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:01 Reading User code... Read and Check phone data... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL3 phone detected Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 1170000AB9785450C095909543861B5458001223 CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : B9354E81AC464DED33FC7B90295086150F45393500 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... Connect phone on selected interface... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Resetting life Timer... Error check LifeTimer Data, break Reset It manually, please Done User Code is: not set Done! |
 |
| The Following User Says Thank You to ismail hossen For This Useful Post: |
|
04-12-2011, 13:34
| #1802 (permalink) |
| Freak Poster Join Date: Dec 2007 Location: bangladesh
Posts: 347
Member: 642363 Status: Offline Thanks: 50
Thanked 37 Times in 30 Posts
| registered to: ismail hossen Connect phone on selected interface... UFS S/N 25410 boot - Ok Connect phone on selected interface... Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok No answer from phone... 1. Check cable/connection, try again 2. Maybe HW fault or bad cable Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok No answer from phone... 1. Check cable/connection, try again 2. Maybe HW fault or bad cable Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok No answer from phone... 1. Check cable/connection, try again 2. Maybe HW fault or bad cable Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 APE part info : APE ASICID : 008815D3 APE MODE ID : 00 APE PUB ID : A3D19ACA17ABAB3E29EFB2E85077F6D1863A8917 APE R_HASH : 0BBC4203E2D3B82504C75CB65E906A35 APE ROM ID : 137A9A3B33259D2C CMT part info : CMT ASICID : 000000010000022600010006400C192101031103 CMT EM0 ID : 00000295 CMT EM1 ID : 00000B22 CMT PUB ID : 0A700007279A0158FBAF40EBC3CEC740A6AE1C19 CMT MODE ID : 00 CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE CMT ROM ID : 4B9B75103E691FF8 CMT : Sending 2nd loader... Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 00350001 , CMT , NOR CMT Flash ID : 00350001 < SPANSION => 72NS128N FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0 CMT Algo sent CMT PAPUB : 7799ABC45695918C0B8E955FAD5FF12650E6AEF700 Transmission mode : Dual (Ddr, TX2) APE : Sending 2nd loader... Use : nomadik8815_2nd.fg , Rev : 0.0 Ver : 1.43.0 APE Loader sent, Boot Ok FLASHID : 00B10020 , APE , NAND APE Flash ID : 00B10020 < ST => 1GB ALGO : N8815 ALG STNFM FLMCID : 00FFFF00000000 Sending ALGO.... Use : nomadik8815_alg.fg , Rev : 0.0 Ver : 1.57.0 APE Algo sent RX : 3F3F000000F172000000 Boot Done! Init Service mode... Wait... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL2 phone detected Done! Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Resetting selected items... Check phone mode... Phone in Local mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:10 Reading LifeTimer data... LifeTime is: 236387 seconds Phone works: 65 Hours; 39 minutes; 47 seconds Done Resetting life Timer... Reset Done! Done |
| |
| The Following User Says Thank You to ismail hossen For This Useful Post: |
|
04-12-2011, 13:36
| #1803 (permalink) |
| Freak Poster Join Date: Dec 2007 Location: bangladesh
Posts: 347
Member: 642363 Status: Offline Thanks: 50
Thanked 37 Times in 30 Posts
| registered to: ismail hossen Connect phone on selected interface... UFS S/N 25410 boot - Ok Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Read and Check phone data... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Setting FlashMode FlashMode set Ok 1st boot Ok, C0 APE part info : APE ASICID : 17100701 APE MODE ID : 00 APE PUB ID : CB3065D2CBE8D91B859363D1F35D1EF9416897F5 APE R_HASH : 2C05369F57CC3C4CF9E783E83D9B512B APE ROM ID : AB5E4ADB27A06946 CMT part info : CMT ASICID : 000000010000022600010006000C192101002200 CMT EM0 ID : 00000232 CMT EM1 ID : 00000352 CMT PUB ID : 06E0010E9DA94951336522647461EF21D9C08435 CMT MODE ID : 00 CMT R_HASH : E9EFF4BFAA5393217CA6B17755FC3E14 CMT ROM ID : F28A211FCEA7B19D CMT : Sending 2nd loader... Use : RAP3Gv2_2nd.fg , Rev : 0.0 Ver : 1.21.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 00020001 , CMT , NOR CMT Flash ID : 00020001 < UNKNOW [NOT IN BASE] FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : 72BF9DE5D6711B3B1133EBCAB5914FA419C78DC100 Transmission mode : Dual (Ddr, TX2) APE : Sending 2nd loader... Use : helen3_2nd.fg , Rev : 0.0 Ver : 1.35.0 APE Loader sent, Boot Ok FLASHID : 003600EC , APE , NAND APE Flash ID : 003600EC < SAMSUNG [SEC] => K5E1212ACM [NAND] ALGO : OMAP1610 GBBM-1.8.1 AL FLMCID : 000002000000060000000000000000 Sending ALGO.... Use : h3_sam_nand_gbbm.fg , Rev : 0.0 Ver : 1.33.0 APE Algo sent APE PAPUB : 72BF9DE5D6711B3B1133EBCAB5914FA419C78DC000 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... Connect phone on selected interface... Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Reading User code... User Code is: not set Done! Reading LifeTimer data... LifeTime is: 2684012 seconds Phone works: 745 Hours; 33 minutes; 32 seconds Done Resetting life Timer... Reset Done! Done Resetting selected items... Check phone mode... Phone in Local mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:08 Format File System... Operating mode is OK, no need change... Scanning FS parametres... Checking Data... Detected : 2 drive(s)... Start formating.... Using Series 60 format algorithm... ================================== Formating drive : C now... Step1 : Error! Step2 : Error! End format... ================================== Formating drive : D now... Step1 : Error! Step2 : Error! End format... ================================== Done! Format File System... Operating mode is OK, no need change... Scanning FS parametres... Checking Data... Detected : 2 drive(s)... Start formating.... Using Series 60 format algorithm... ================================== Formating drive : C now... Step1 : Error! Step2 : Error! End format... ================================== Formating drive : D now... Step1 : Error! Step2 : Error! End format... ================================== Done! Format File System... Operating mode is OK, no need change... Scanning FS parametres... Checking Data... Detected : 2 drive(s)... Start formating.... Using Series 60 format algorithm... ================================== Formating drive : C now... Step1 : Error! Step2 : Error! End format... ================================== Formating drive : D now... Step1 : Error! Step2 : Error! End format... ================================== Done! Initializing Tests... IMEI : 359380000980998 , Phone : RM-84 Nokia N70 Get keys... PASSED | ST_TAHVOINT_TEST PASSED | ST_UEM_CBUS_IF_TEST PASSED | ST_EAR_DATA_LOOP_TEST PASSED | ST_SIM_CLK_LOOP_TEST PASSED | ST_SIM_IO_CTRL_LOOP_TEST PASSED | ST_SLEEPCLK_FREQ_TEST PASSED | ST_SIM_LOCK_TEST PASSED | ST_SECURITY_TEST PASSED | ST_PWR_KEY_TEST PASSED | ST_CURRENT_CONS_TEST NOT EXECUTED | ST_CMT_APE_WAKEUP_TEST PASSED | ST_BACKUP_BATT_TEST ->ERROR | ST_RADIO_TEST ->ERROR | ST_HOOKINT_TEST PASSED | ST_VIBRA_TEST PASSED | ST_BTEMP_TEST NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST NOT EXECUTED | ST_CDSP_TX_IQ_TEST NOT EXECUTED | ST_CDSP_TXC_DATA_TEST NOT EXECUTED | ST_CDSP_WCDMA_TX_POWER_TEST NOT EXECUTED | ST_CDSP_RX_IQ_LOOP_BACK_TEST NOT EXECUTED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST NOT EXECUTED | ST_CDSP_TX_PLL_PHASE_LOCK_TEST NOT EXECUTED | ST_CDSP_PWR_DETECTOR_BIAS_TEST NOT EXECUTED | ST_CDSP_GSM_TX_POWER_TEST ->ERROR | ST_KEYBOARD_STUCK_TEST MINOR | ST_LPRF_IF_TEST PASSED | ST_CAMERA_IF_TEST PASSED | ST_SEC_CAMERA_IF_TEST MINOR | ST_LPRF_AUDIO_LINES_TEST PASSED | ST_MAIN_LCD_IF_TEST ->ERROR | ST_BT_WAKEUP_TEST MINOR | ST_BT_SLEEP_CLK_TEST SelfTests end Done! Elapsed: 00:00:54 Format File System... Operating mode is OK, no need change... Scanning FS parametres... Checking Data... Detected : 2 drive(s)... Start formating.... Using Series 60 format algorithm... ================================== Formating drive : C now... Step1 : Error! Step2 : Error! End format... ================================== Formating drive : D now... Step1 : Error! Step2 : Error! End format... ================================== Done! Phone disconected! Connect phone on selected interface... card found: S/N 1AEA:0118 registered to: ismail hossen Connect phone on selected interface... Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok FlashMode set Ok 1st boot Ok, C0 APE part info : APE ASICID : 17100701 APE MODE ID : 00 APE PUB ID : CB3065D2CBE8D91B859363D1F35D1EF9416897F5 APE R_HASH : 2C05369F57CC3C4CF9E783E83D9B512B APE ROM ID : AB5E4ADB27A06946 CMT part info : CMT ASICID : 000000010000022600010006000C192101002200 CMT EM0 ID : 00000232 CMT EM1 ID : 00000352 CMT PUB ID : 06E0010E9DA94951336522647461EF21D9C08435 CMT MODE ID : 00 CMT R_HASH : E9EFF4BFAA5393217CA6B17755FC3E14 CMT ROM ID : F28A211FCEA7B19D CMT : Sending 2nd loader... Use : RAP3Gv2_2nd.fg , Rev : 0.0 Ver : 1.21.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 00020001 , CMT , NOR CMT Flash ID : 00020001 < UNKNOW [NOT IN BASE] FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : 72BF9DE5D6711B3B1133EBCAB5914FA419C78DC100 Transmission mode : Dual (Ddr, TX2) APE : Sending 2nd loader... Use : helen3_2nd.fg , Rev : 0.0 Ver : 1.35.0 APE Loader sent, Boot Ok FLASHID : 003600EC , APE , NAND APE Flash ID : 003600EC < SAMSUNG [SEC] => K5E1212ACM [NAND] ALGO : OMAP1610 GBBM-1.8.1 AL FLMCID : 000002000000060000000000000000 Sending ALGO.... Use : h3_sam_nand_gbbm.fg , Rev : 0.0 Ver : 1.33.0 APE Algo sent APE PAPUB : 72BF9DE5D6711B3B1133EBCAB5914FA419C78DC000 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Done! Connect phone on selected interface... UFS S/N 25410 boot - Ok Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok |
| |
| The Following User Says Thank You to ismail hossen For This Useful Post: |
|
04-12-2011, 13:37
| #1804 (permalink) |
| Freak Poster Join Date: Dec 2007 Location: bangladesh
Posts: 347
Member: 642363 Status: Offline Thanks: 50
Thanked 37 Times in 30 Posts
| registered to: ismail hossen Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm618__04.90.mcusw PPM : rm618__04.90.ppm_ms CNT : rm618__04.90.image_ms_0595278_005 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000000000000022000509200C0000 EM0 ID: 00005361 PUBLIC ID: 7CCBD082063B2E1193F6DC868C22B5BD3A8C995A ASIC MODE ID: 00 ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E ROM ID: DE56D582BDDE7A3A Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 10.50.0 Processing RAWLOADER... FLIC : 00300020 Req : XSR 1.6 Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 10.50.0 Boot Done!  TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... No any CRT data (MCU damaged/CERT erased), skip saving ===Flashing [MCU]=== Erase : Processing rm618__04.90.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__04.90.mcusw CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [ISA+DYNSW] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [UPDAPP] Total writen 506 blocks TIME : Write time : 00:00:31 MCU Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [PPM]=== Erase : Processing rm618__04.90.ppm_ms Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__04.90.ppm_ms Total writen 111 blocks TIME : Write time : 00:00:07 PPM Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [CNT]=== Erase : Processing rm618__04.90.image_ms_0595278_005 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm618__04.90.image_ms_0595278_005 Total writen 371 blocks TIME : Write time : 00:00:23 CNT Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ADL: Close_Session Content: 000300000000000000000000000000 ADL: Reboot Flashing done! Total flash time : 00:01:03 Reboot phone now... -> Flashing Failed! Maybee HW error, or Downgrade try???!Anyway - try reinsert battery and PowerUp phone manualy Connect phone on selected interface... Done! Elapsed: 00:03:10 Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm618__04.90.mcusw PPM : rm618__04.90.ppm_ms CNT : rm618__04.90.image_ms_0595278_005 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000000000000022000509200C0000 EM0 ID: 00005361 PUBLIC ID: 7CCBD082063B2E1193F6DC868C22B5BD3A8C995A ASIC MODE ID: 00 ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E ROM ID: DE56D582BDDE7A3A Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 10.50.0 Processing RAWLOADER... FLIC : 00300020 Req : XSR 1.6 Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 10.50.0 Boot Done! TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 353423042290129 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\353423042290129_CR T.rpl ===Flashing [MCU]=== Erase : Processing rm618__04.90.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__04.90.mcusw CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [ISA+DYNSW] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [UPDAPP] Total writen 506 blocks TIME : Write time : 00:00:30 MCU Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [PPM]=== Erase : Processing rm618__04.90.ppm_ms Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__04.90.ppm_ms Total writen 111 blocks TIME : Write time : 00:00:07 PPM Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [CNT]=== Erase : Processing rm618__04.90.image_ms_0595278_005 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm618__04.90.image_ms_0595278_005 Total writen 371 blocks TIME : Write time : 00:00:23 CNT Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ADL: Close_Session Content: 000300000000000000000000000000 ADL: Reboot Flashing done! Total flash time : 00:01:03 Reboot phone now... Reading Phone Info.... Connected phone - Nokia X2-00 Software Info: V 04.90 28-09-10 RM-618 (c) Nokia IMEI: 353423042290129 PPM version : V 04.90 28-09-10 RM-618 (c) Nokia MS Product code: 0595278 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Product code update... Resetting LifeTimer Reset Done! Checking User Certificates... Total - 39 certs Data exist, skip certificate repair... Set phone to Normal mode... AfterFlash operations done... Done! Elapsed: 00:02:47 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface... |
| |
| The Following 2 Users Say Thank You to ismail hossen For This Useful Post: |
|
04-12-2011, 13:38
| #1805 (permalink) |
| Freak Poster Join Date: Dec 2007 Location: bangladesh
Posts: 347
Member: 642363 Status: Offline Thanks: 50
Thanked 37 Times in 30 Posts
| registered to: ismail hossen Connect phone on selected interface... UFS S/N 25410 boot - Ok Connect phone on selected interface... Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 29D0000F57406F561E11E682896032A6AAF4F49A CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 002F0001 , CMT , NOR CMT Flash ID : 002F0001 < SPANSION => 72NS256N FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : 7E6491E8D30494B45630BB3A8599F4E1C674C95500 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Core version : 1.18 , Rev : 3.0 Selected FlashSettings : FullFlash Files Set for Flashing : MCU : rm217__07.30.mcusw PPM : rm217__07.30.ppm_b CNT : rm217__07.30.image_ora_pl_red Check FlashFiles, Please, wait... -> Check SW version... FlashFile version : 07.30 Phone version : 07.30 07-05-09 RM-217 (c) Nokia. -> Check SW version : Reflash Backup enabled, Will read Certificates now... Backup CRT308 CRT308 Backup Created... CRT308 Backup Created... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 29D0000F57406F561E11E682896032A6AAF4F49A CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 002F0001 , CMT , NOR CMT Flash ID : 002F0001 < SPANSION => 72NS256N FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 Payload msg : DD Error : algorithm not accepted Read and Check phone data... UFS S/N 25410 boot - Ok Connect phone on selected interface... Read and Check phone data... BB5 bus checking... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 29D0000F57406F561E11E682896032A6AAF4F49A CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 002F0001 , CMT , NOR CMT Flash ID : 002F0001 < SPANSION => 72NS256N FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : 7E6491E8D30494B45630BB3A8599F4E1C674C95500 Transmission mode : Dual (Ddr, TX2) Boot Done! Init Service mode... Wait... SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Done! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok SimLock status : SimLock is Ok Security status : Security is Ok SDD Key status : SD Data is Ok PA_SimLock Version : PA_SL phone detected Setting FlashMode Phone disconected! Connect phone on selected interface... UFSx : FlashMode init fail! Reconnect box Init Service mode... Wait... Phone found! Series 40 Device detected! read info... - Ok Connect phone on selected interface... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Core version : 1.18 , Rev : 3.0 Selected FlashSettings : FullFlash Files Set for Flashing : MCU : rm217__07.30.mcusw PPM : rm217__07.30.ppm_b CNT : rm217__07.30.image_ora_pl_red Check FlashFiles, Please, wait... -> Check SW version... FlashFile version : 07.30 Phone version : 07.30 07-05-09 RM-217 (c) Nokia. -> Check SW version : Reflash Backup enabled, Will read Certificates now... Backup CRT308 CRT308 Backup Created... CRT308 Backup Created... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 29D0000F57406F561E11E682896032A6AAF4F49A CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 002F0001 , CMT , NOR CMT Flash ID : 002F0001 < SPANSION => 72NS256N FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : 7E6491E8D30494B45630BB3A8599F4E1C674C95500 Transmission mode : Dual (Ddr, TX2) Boot Done! CMT : Read NPC certificate... Cert size : 12288 byte(s) IMEI : 352042025169133 CMT : Read CCC certificate... Cert size : 8192 byte(s) CMT : Read HWC certificate... Cert size : 12288 byte(s) CMT : Read VARIANT certificate... Cert size : 20480 byte(s) |
| |
| The Following User Says Thank You to ismail hossen For This Useful Post: |
|
04-12-2011, 14:47
| #1806 (permalink) |
| Product Supporter   Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,641
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 958
Thanked 2,468 Times in 1,093 Posts
| registered to: saeedullah_khan Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm561__09.98.mcusw PPM : rm561__09.98.ppm_mh CNT : rm561__09.98_008.image_mh_ctv_in_v3_88814 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! RAP_PUB: 07A00003316F4650FADD1EB070987D7B1654944C CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:06 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm561__09.98.mcusw Found 6 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT Result: 0000 Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT Result: 0000 Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:24 Write : Processing rm561__09.98.mcusw Total 1256 [1256/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] TIME : Write time : 00:01:03 MCU Write done ===Flashing [PPM]=== Erase : Processing rm561__09.98.ppm_mh Found 1 areas to erase Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:59 Write : Processing rm561__09.98.ppm_mh Total 399 [399/0/0] blocks to write, writing... TIME : Write time : 00:00:21 PPM Write done ===Flashing [CNT]=== Erase : Processing rm561__09.98_008.image_mh_ctv_in_v3_88814 Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:05:24 Checking content info... Check Image : Content size is 128k, use direct write mode Write : Processing rm561__09.98_008.image_mh_ctv_in_v3_88814 Total 512 [512/0/0] blocks to write, writing... TIME : Write time : 00:00:28 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:10:41 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 2700 classic Software Info: V 09.98 06-09-10 RM-561 (c) Nokia IMEI: 359360039059758 PPM version : V 09.98 06-09-10 RM-561 (c) Nokia MH Product code: 0579321 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:11:31 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Backup Certificates now... Backup CRT308 data... CRT308 Backup Created... Check communication with phone.... ADL not support backup mode, rpl reading impossible SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\BEST_v1.19\Backup\Cert\359360039059758_SIM.rp l Elapsed: 00:00:00 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
| The Following User Says Thank You to saeedullah_khan For This Useful Post: |
|
04-12-2011, 14:50
| #1807 (permalink) |
| No Life Poster   Join Date: Mar 2007 Location: punjab(india) Age: 34
Posts: 1,237
Member: 467045 Status: Offline Sonork: 100.1603919 Thanks: 225
Thanked 1,699 Times in 610 Posts
| nokia 3500c flashing done card found: S/N 0390:0118 registered to: jindalgsm4255 Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm272__07.21.mcusw PPM : rm272__07.21.ppm_a CNT : rm272__07.21.image_a_pink Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! RAP_PUB: 26400217345A7B561AD0A69C42A6BC5C9B4C9563 CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm272__07.21.mcusw Found 9 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT Result: 0000 Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT Result: 0000 Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT Result: 0000 Erasing area 0x01060000 - 0x01067FFF, NOR, CMT Result: 0000 Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:36 Write : Processing rm272__07.21.mcusw Total 936 [936/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [PAPUBKEYS] CMT : PAPUBKEYS skip, already sent CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [PMM_CONF] CMT : Writing Hash CERT [SBIF_CONF] TIME : Write time : 00:01:25 MCU Write done ===Flashing [PPM]=== Erase : Processing rm272__07.21.ppm_a Found 1 areas to erase Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:25 Write : Processing rm272__07.21.ppm_a Total 207 [207/0/0] blocks to write, writing... TIME : Write time : 00:00:18 PPM Write done ===Flashing [CNT]=== Erase : Processing rm272__07.21.image_a_pink Found 1 areas to erase Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:15 Checking content info... Resetting phone... Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm272__07.21.image_a_pink ConvertImage: Page Size is 64K, converting... ConvertImage: File converted Loader len: 253888, CHK: 166F ADL -> Sending loader... Reset connection... ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok Write : Processing rm272__07.21.image_a_pink_128 Total 360 [360/0/0] blocks to write, writing... TIME : Write time : 00:00:33 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:05:35 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 3500c Software Info: V 07.21 05-11-08 RM-272 (c) Nokia. IMEI: 353080028172745 PPM version : V 07.21 05-11-08 RM-272 (c) Nokia. A Product code: 0567037 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:06:41 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
| The Following User Says Thank You to JINDALGSM For This Useful Post: |
|
04-12-2011, 15:55
| #1808 (permalink) |
| No Life Poster  Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| registered to: wc2sime Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-625_40.1.003_prd.core.C00 PPM : RM-625_40.1.003_prd.rofs2.V11 PPM2 : RM-625_40.1.003_prd.rofs2.V12 CNT : RM-625_40.1.003_C01_prd.rofs3.fpsx APE : RM625_40.1.003_001_001_U003.uda.fpsx CNT3 : RM625_40.1.003_001_001_U004.uda.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101051105 EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 04D00011A3AB0052614850292F643B4C78F9C77E ASIC MODE ID: 00 ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing UPDAPP... Processing PAPUBKEYS... Processing UPDAPP... Boot Done! TIME : Boot time : 00:00:03 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-625_40.1.003_prd.core.C00 Found 5 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:00 Write : Processing RM-625_40.1.003_prd.core.C00 Total 403 [403/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*ENO] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:27 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-625_40.1.003_prd.rofs2.V11 Found 1 areas to erase Erasing area 0x06CE0000 - 0x0915FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-625_40.1.003_prd.rofs2.V11 Total 79 [79/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:05 PPM Write done ===Flashing [PPM2]=== Erase : Processing RM-625_40.1.003_prd.rofs2.V12 Found 1 areas to erase Erasing area 0x06CE0000 - 0x0915FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-625_40.1.003_prd.rofs2.V12 Total 81 [81/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:06 PPM Write done ===Flashing [CNT]=== Erase : Processing RM-625_40.1.003_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-625_40.1.003_C01_prd.rofs3.fpsx Total 28 [28/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:01 CNT Write done ===Flashing [APE]=== Erase : Processing RM625_40.1.003_001_001_U003.uda.fpsx Found 1 areas to erase Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM625_40.1.003_001_001_U003.uda.fpsx Total 49 [49/0/0] blocks to write, writing... TIME : Write time : 00:00:05 APE Write done ===Flashing [CNT3]=== Erase : Processing RM625_40.1.003_001_001_U004.uda.fpsx Found 1 areas to erase Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM625_40.1.003_001_001_U004.uda.fpsx Total 41 [41/0/0] blocks to write, writing... TIME : Write time : 00:00:04 CNT Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:53 Reboot phone now... Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:01:12 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Phone disconected! Connect phone on selected interface... |
| |
| The Following 2 Users Say Thank You to sameera For This Useful Post: |
|
04-12-2011, 15:56
| #1809 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Files Set for Flashing : MCU : rm561__09.95.mcusw PPM : rm561__09.95.ppm_mena_b CNT : rm561__09.95.image_mena_b_gray Check FlashFiles, Please, wait... -> SWversion check skipped : Manual mode selected Backup enabled, Will read Certificates now... CRT308 Backup Created... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 20400012E37C6B5076A3E4A6754DE280616D6DFD CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : A22A1DDA660002E56108DB5072A10F8709443FA800 Transmission mode : Dual (Ddr, TX2) Boot Done! CMT : Read NPC certificate... Cert size : 20480 byte(s) IMEI : 359360034046818 CMT : Read CCC certificate... Cert size : 30600 byte(s) CMT : Read HWC certificate... Cert size : 20480 byte(s) CMT : Read VARIANT certificate... Cert size : 0 byte(s) Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : C:\InfinityBox1\BEST\Backup\Cert\359360034046818.r pl Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 20400012E37C6B5076A3E4A6754DE280616D6DFD CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : A22A1DDA660002E56108DB5072A10F8709443FA800 Transmission mode : Dual (Ddr, TX2) Boot Done! Transmission mode : Dual (Ddr, TX2) Erase : Processing rm561__09.95.mcusw Found 6 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x00000000 - 0x000006BF CMT , NOR , Area : 0x000006C0 - 0x0001FFFF CMT , NOR , Area : 0x00040000 - 0x000BFFFF CMT , NOR , Area : 0x000C0000 - 0x0013FFFF CMT , NOR , Area : 0x00140000 - 0x0137FFFF CMT , NOR , Area : 0x01380000 - 0x0151FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:01:28 Transmission mode : Dual (Ddr, TX2) Write : Processing rm561__09.95.mcusw CMT: Writing Hash CERT [NOLO] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] Total writen 1247 blocks TIME : Write time : 00:02:34 Transmission mode : Dual (Ddr, TX2) Erase : Processing rm561__09.95.ppm_mena_b Found 1 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01520000 - 0x01DBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:27 Transmission mode : Dual (Ddr, TX2) Write : Processing rm561__09.95.ppm_mena_b Total writen 353 blocks TIME : Write time : 00:00:42 ConvertImage: Processing rm561__09.95.image_mena_b_gray ConvertImage: Page Size is 128K, no need convert Transmission mode : Dual (Ddr, TX2) Erase : Processing rm561__09.95.image_mena_b_gray Found 2 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF CMT , NOR , Area : 0x02160000 - 0x03FBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:04:10 Transmission mode : Dual (Ddr, TX2) Write : Processing rm561__09.95.image_mena_b_gray Total writen 520 blocks TIME : Write time : 00:01:03 Init Service mode... Wait... Reading Phone Info.... Connected phone - Nokia 2700 classic Software Info: V 09.95 02-04-10 RM-561 (c) Nokia IMEI: 35936003OOOOOOOOOO Product code: Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Product code update... Resetting LifeTimer Reset Done! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Phone disconected! Connect phone on selected interface... |
| |
| The Following User Says Thank You to sameera For This Useful Post: |
|
04-12-2011, 15:57
| #1810 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-588_21.6.005_prd.core.C00 PPM : RM-588_21.6.005_prd.rofs2.V12 CNT : RM-588_21.6.005_C01_prd.rofs3.fpsx APE : RM-588_21.6.005_001_000_U001.uda.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Check communication with phone.... ADL req restart Communication verify done... Preparing... Gathering phone info... Check communication with phone... Reboot.... Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101051103 EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 0D800115E5208E52AD02C3299922CFC415D62290 ASIC MODE ID: 00 ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371 ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing UPDAPP... Processing PAPUBKEYS... Processing UPDAPP... Boot Done! TIME : Boot time : 00:00:03 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-588_21.6.005_prd.core.C00 Found 4 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_prd.core.C00 Total 428 [428/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:29 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-588_21.6.005_prd.rofs2.V12 Found 1 areas to erase Erasing area 0x06AA0000 - 0x0915FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_prd.rofs2.V12 Total 83 [83/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:06 PPM Write done ===Flashing [CNT]=== Erase : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx Total 28 [28/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:01 CNT Write done ===Flashing [APE]=== Erase : Processing RM-588_21.6.005_001_000_U001.uda.fpsx Found 1 areas to erase Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_001_000_U001.uda.fpsx Total 23 [23/0/0] blocks to write, writing... TIME : Write time : 00:00:01 APE Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:41 Reboot phone now... Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:01:05 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Set phone in Normal mode... Restarting... User INI update - Ok Done! |
| |
| The Following 2 Users Say Thank You to sameera For This Useful Post: |
|
04-12-2011, 15:58
| #1811 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-588_21.6.005_prd.core.C00 PPM : RM-588_21.6.005_prd.rofs2.V13 CNT : RM-588_21.6.005_C01_prd.rofs3.fpsx APE : RM-588_21.6.005_001_000_U001.uda.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Check communication with phone.... ADL req restart Communication verify done... Preparing... Gathering phone info... Check communication with phone... Reboot.... Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101051103 EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 0D800115E5208E52AD02C3299922CFC415D62290 ASIC MODE ID: 00 ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371 ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing UPDAPP... Processing PAPUBKEYS... Processing UPDAPP... Boot Done! TIME : Boot time : 00:00:03 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-588_21.6.005_prd.core.C00 Found 4 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_prd.core.C00 Total 428 [428/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:29 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-588_21.6.005_prd.rofs2.V13 Found 1 areas to erase Erasing area 0x06AA0000 - 0x0915FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_prd.rofs2.V13 Total 98 [98/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:07 PPM Write done ===Flashing [CNT]=== Erase : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx Total 28 [28/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:01 CNT Write done ===Flashing [APE]=== Erase : Processing RM-588_21.6.005_001_000_U001.uda.fpsx Found 1 areas to erase Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_001_000_U001.uda.fpsx Total 23 [23/0/0] blocks to write, writing... TIME : Write time : 00:00:01 APE Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:42 Reboot phone now... Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:01:06 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Phone disconected! Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok |
| |
| The Following 2 Users Say Thank You to sameera For This Useful Post: |
|
04-12-2011, 15:59
| #1812 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| registered to: wc2sime Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-588_21.6.005_prd.core.C00 PPM : RM-588_21.6.005_prd.rofs2.V11 CNT : RM-588_21.6.005_C01_prd.rofs3.fpsx APE : RM-588_21.6.005_001_000_U001.uda.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Check communication with phone.... ADL req restart Communication verify done... Preparing... Gathering phone info... Check communication with phone... Reboot.... Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101051103 EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 0D800115E5208E52AD02C3299922CFC415D62290 ASIC MODE ID: 00 ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371 ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing UPDAPP... Processing PAPUBKEYS... Processing UPDAPP... Boot Done! TIME : Boot time : 00:00:03 Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 Waiting for response: 26 Waiting for response: 25 Waiting for response: 24 Waiting for response: 23 Waiting for response: 22 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-588_21.6.005_prd.core.C00 Found 4 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_prd.core.C00 Total 428 [428/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:29 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-588_21.6.005_prd.rofs2.V11 Found 1 areas to erase Erasing area 0x06AA0000 - 0x0915FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_prd.rofs2.V11 Total 80 [80/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:06 PPM Write done ===Flashing [CNT]=== Erase : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx Total 28 [28/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:01 CNT Write done ===Flashing [APE]=== Erase : Processing RM-588_21.6.005_001_000_U001.uda.fpsx Found 1 areas to erase Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-588_21.6.005_001_000_U001.uda.fpsx Total 23 [23/0/0] blocks to write, writing... TIME : Write time : 00:00:02 APE Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:41 Reboot phone now... Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:01:37 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Phone disconected! Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok |
| |
| The Following 2 Users Say Thank You to sameera For This Useful Post: |
|
04-12-2011, 16:19
| #1813 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,641
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 958
Thanked 2,468 Times in 1,093 Posts
| registered to: saeedullah_khan Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : C5F02102_rm495__07.97.mcusw PPM : 4BB8AA07_rm495__07.97.ppm_mena_a1 CNT : E24393CE_rm495__07.97.image_mena_a1_red Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! RAP_PUB: 1150010A1F2A8E560D1A173EDBC70290F99DFE71 CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:06 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing C5F02102_rm495__07.97.mcusw Found 6 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT Result: 0000 Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT Result: 0000 Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:28 Write : Processing C5F02102_rm495__07.97.mcusw Total 1178 [1178/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] TIME : Write time : 00:01:02 MCU Write done ===Flashing [PPM]=== Erase : Processing 4BB8AA07_rm495__07.97.ppm_mena_a1 Found 1 areas to erase Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:00 Write : Processing 4BB8AA07_rm495__07.97.ppm_mena_a1 Total 388 [388/0/0] blocks to write, writing... TIME : Write time : 00:00:21 PPM Write done ===Flashing [CNT]=== Erase : Processing E24393CE_rm495__07.97.image_mena_a1_red Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:05:36 Checking content info... Check Image : Content size is 128k, use direct write mode Write : Processing E24393CE_rm495__07.97.image_mena_a1_red Total 656 [656/0/0] blocks to write, writing... TIME : Write time : 00:00:34 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:11:02 |
| |
| The Following User Says Thank You to saeedullah_khan For This Useful Post: |
|
04-13-2011, 03:23
| #1814 (permalink) |
| Freak Poster  Join Date: Feb 2011 Location: rappang - sidrap
Posts: 162
Member: 1522666 Status: Offline Thanks: 169
Thanked 101 Times in 43 Posts
| card found: S/N registered to: Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm237__07.30.mcusw CNT : rm237__07.30.image_c_tr Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- -------BOOT BREAKED BY USER------- -> Phone not found.. -> Error while flashing... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm237__07.30.mcusw CNT : rm237__07.30.image_c_tr Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! RAP_PUB: 0F40020756667C56DE7ED95891000D881C8A6734 CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm237__07.30.mcusw Found 9 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT Result: 0000 Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT Result: 0000 Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT Result: 0000 Erasing area 0x01060000 - 0x01067FFF, NOR, CMT Result: 0000 Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:12 Write : Processing rm237__07.30.mcusw Total 945 [945/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [PAPUBKEYS] CMT : PAPUBKEYS skip, already sent CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [PMM_CONF] CMT : Writing Hash CERT [SBIF_CONF] TIME : Write time : 00:00:44 MCU Write done ===Flashing [CNT]=== Erase : Processing rm237__07.30.image_c_tr Found 1 areas to erase Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:56 Checking content info... Resetting phone... Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm237__07.30.image_c_tr ConvertImage: Page Size is 64K, converting... ConvertImage: File converted Loader len: 253888, CHK: 17DB ADL -> Sending loader... Reset connection... ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok Write : Processing rm237__07.30.image_c_tr_128 Total 240 [240/0/0] blocks to write, writing... TIME : Write time : 00:00:11 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:05:04 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 3110c Software Info: V 07.30 07-05-09 RM-237 (c) Nokia. IMEI: 356418029038605 PPM version : V 07.21 05-11-08 RM-237 (c) Nokia. X Product code: 0514959 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:06:14 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Read and Check phone data... ---------------------- RAP_BOOT: 0901010002010000 RAP_PUB: 0F40020756667C56DE7ED95891000D881C8A6734 CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1 RAP_PAPUB: C0E691EA16A7593A9BB28832D7312A39F7ED668D ---------------------- Live Test Ok! ---------------------- CMT Flash ID : 89810089 < INTEL => NU48F256 CNT sector : 128 kb ------------------------ SDD Key status : SD Data is Ok SimLock status : SimLock is Ok Security status : Security is Ok PA_SimLock Version : PA_SL phone detected Done! Reading Phone Info.... Connected phone - Nokia 3110c Software ver : V 07.30 07-05-09 RM-237 (c) Nokia. IMEI : 356418029038605 Ape Ver : APE Var : APE ADSP: DSP Ver : ICPR61_08w10 APE Test: PPM : V 07.21 05-11-08 RM-237 (c) Nokia. X CNT : Content: c_tr V 07.30 07-05-09 RM-237 (c) Nokia. Product SN : MPF689736 Product code : 0514959 Base Prd.code: 0542523 Module code : 0203291 Long Prod.SN : Hardware info======= HWID : 5005 Retu : 32 Tahvo : 53 Batery: 3847 mV Camera: CMT BT: 06cc-P9.1 APE BT: APE HW: LCDVer: RF ic : Lock info =========== IMEI : 356418029038605 IMEI spNet : 3A 65 14 08 92 30 68 00 IMEI svNet : 33 65 14 08 92 30 68 20 F7 Conf key : 0000000000000000 Provider key : 2440700000000000 Provider : AT&T;U.S.A. (3650) Counters : Key 0 [3] , Fbus 0 [10] Blocks : 7 LOCK STATUS : ============================= BLK : 1 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 2 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 3 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 4 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 5 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 6 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 7 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open ============================= LOCKS : All Open ============================= CRT308 Backup Created... User Code : 12345 MMC pwd : no any record found UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] Done! Phone disconected! Connect phone on selected interface... |
| |
| The Following User Says Thank You to oddank For This Useful Post: |
|
04-13-2011, 06:04
| #1815 (permalink) |
| No Life Poster Join Date: May 2005 Location: Pakistan,Peshawar
Posts: 1,066
Member: 144708 Status: Offline Sonork: 100.1615125 Thanks: 356
Thanked 309 Times in 234 Posts
| N97 Flashing Done registered to: GSM007 Connect phone on selected interface... Connect phone on selected interface... Resetting selected items... Check phone mode... Phone in Error mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Error When resetting Full factory ...Elapsed: 00:01:44 Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-505_22.0.110_prd.core.C00 PPM : RM-505_22.0.110_prd.rofs2.V46 CNT : RM-505_22.0.110_C01_prd.rofs3.fpsx APE : RM505_507_22.0.110_uda_5_001.uda.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101031103 EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 1F700009E1DA0158FBF91959EA4888732645232F ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing UPDAPP... Processing PAPUBKEYS... Processing UPDAPP... Boot Done! TIME : Boot time : 00:00:04 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-505_22.0.110_prd.core.C00 Found 4 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x0AB9FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_prd.core.C00 Total 477 [477/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:42 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-505_22.0.110_prd.rofs2.V46 Found 1 areas to erase Erasing area 0x079A0000 - 0x09C9FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_prd.rofs2.V46 Total 81 [81/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:08 PPM Write done ===Flashing [CNT]=== Erase : Processing RM-505_22.0.110_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x09CA0000 - 0x0AB9FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_C01_prd.rofs3.fpsx Total 6 [6/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:00 CNT Write done ===Flashing [APE]=== Erase : Processing RM505_507_22.0.110_uda_5_001.uda.fpsx Found 1 areas to erase Erasing area 0x0ABA0000 - 0x0F71FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM505_507_22.0.110_uda_5_001.uda.fpsx Total 17 [17/0/0] blocks to write, writing... TIME : Write time : 00:00:01 APE Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:53 Reboot phone now... Reading Phone Info.... Connected phone - Nokia N97 Software Info: V ICPR72_09w44.18 28-05-10 RM-505 (c) Nokia IMEI: 354225032834496 Ape Version: v 22.0.110 Product code: 0575744 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! GSM007 |
| |
| The Following 2 Users Say Thank You to ***GSM007*** For This Useful Post: |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| thread | Thread Starter | Forum | Replies | Last Post |
| New Nokia Software!!!!!!! | Jefferson | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 73 | 05-15-2013 13:07 |
| Need software upgrade for Nokia 5110 | ptkrf | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 26 | 09-25-2012 02:41 |
| Sim card sleep mode problem with 6130 | ratzfatz | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 4 | 05-22-2012 11:13 |
| Help with 6110 | paulomt1 | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 3 | 05-25-2009 16:29 |
| Netmonitor with FBus???? | ratzfatz | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 4 | 06-09-1999 17:04 |
Linear Mode
