|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| |||||||
| Register | FAQ | Donate | Forum Rules | ★. iPhone Unlock .★ | -= JTAG BOOM =- | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
05-06-2011, 19:20
| #2206 (permalink) |
| Freak Poster  Join Date: Jun 2007 Location: ALGERIE-GSM Age: 33
Posts: 276
Member: 520327 Status: Offline Sonork: 100.1636717 Thanks: 392
Thanked 61 Times in 35 Posts
| FS S/N ****** boot - Ok Connect phone on selected interface... Phone found! Series 40 Device detected! [DCT4+] read info... - Ok Reading Phone Info.... SW ver : V 06.17 10-03-09 RM-392 (c) Nokia IMEI : 352688040148971 PPM : V 06.17 10-03-09 RM-392 (c) Nokia O CNT : Content: ae_fr ORANGE FR 10-03-09 RM-392 (c) Nokia DSP Ver : PR72_08w52_UPP PCode : 0576448 BPCode : 0556744 HWID : 2002 LCDVer : SEIKO IMEI : 352688040148971 Sl Conf : 208-01-00000000000 Sl Prof : 800000000003000-B Sl Aux : 000B5555 Hw Sig : 86A3E1A34C858F19 Provider : Orange + France Telecom Itineris;France Lock info: Block 1 L1:Close; Done! Write SL RPL procedure procedure started... Read Lock Info Locked to Orange + France Telecom Itineris;France Unlocking... All done ! Reading Phone Info.... SW ver : V 06.17 10-03-09 RM-392 (c) Nokia IMEI : 352688040148971 PPM : V 06.17 10-03-09 RM-392 (c) Nokia O CNT : Content: ae_fr ORANGE FR 10-03-09 RM-392 (c) Nokia DSP Ver : PR72_08w52_UPP PCode : 0576448 BPCode : 0556744 HWID : 2002 LCDVer : SEIKO IMEI : 352688040148971 Sl Conf : 001-01-00000000000 Sl Prof : 000000000003000-B Sl Aux : 000B5555 Hw Sig : 86A3E1A34C858F19 Provider : Default Test Operator Lock info: Block 1 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 2 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 3 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 4 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 5 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 6 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 7 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Done! |
 |
| The Following 3 Users Say Thank You to malek_bh For This Useful Post: |
|
05-06-2011, 19:22
| #2207 (permalink) |
| Freak Poster Join Date: Jun 2007 Location: ALGERIE-GSM Age: 33
Posts: 276
Member: 520327 Status: Offline Sonork: 100.1636717 Thanks: 392
Thanked 61 Times in 35 Posts
| Nokia 5800 XpressMusic unlock done: card found: S/N ********* registered to: malek Connect phone on selected interface... UFS S/N ****** boot - Ok Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Reading Phone Info.... Connected phone - Nokia 5800 XpressMusic Software ver : V ICPR72_08w47 24-11-08 RM-356 (c) Nokia IMEI : 354183023646140 Ape Ver : V 11.0.008 APE Var : V 11.0.008 ROFS1V 11.0.008 11.0.008.229.02 APE ADSP: 256 DSP Ver : ICPR72_08w47 APE Test: rm356_ENO_x_2008_wk21v0.002 PPM : CNT : Product SN : C7B488930 Product code : 0576039 Base Prd.code: 0578897 Module code : Long Prod.SN : 0 Hardware info======= HWID : 1101 Retu : 16 Tahvo : 22 Batery: 4578 mV Camera: CMT BT: APE BT: APE HW: 256 LCDVer: RF ic : 17141715 Lock info =========== IMEI : 354183023646140 IMEI spNet : IMEI svNet : Conf key : 0000000000000000 Provider key : 2080100000000000 Provider : Orange + France Telecom Itineris;France Counters : Key 0 [3] , Fbus 0 [10] Blocks : 2 LOCK STATUS : ============================= BLK : 1 Lock1:Close BLK : 2 Lock1:Close ============================= LOCKS : Closed ============================= User code : Crypted UserDataExLevel : Low [Gallery] Done! Backup Certificates now... CRT308 Backup Created...  Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006400C192101031103 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 1900020A01710052D428376CF58EB4A47CAB77F0 CMT MODE ID : 00 CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE CMT ROM ID : 4B9B75103E691FF8 CMT : Sending 2nd loader... Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 004000EC , CMT , NAND CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND] FLCNT : 00030000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0 CMT Algo sent CMT PAPUB : A20187051C30162EE91C77AE5E6011F5F1BA619000 Transmission mode : Dual (Ddr, TX2) Boot Done! CMT : Read NPC certificate... Cert size : 2048 byte(s) IMEI : 354183023646140 CMT : Read CCC certificate... Cert size : 1024 byte(s) CMT : Read HWC certificate... Cert size : 1024 byte(s) CMT : Read VARIANT certificate... Cert size : 0 byte(s) Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\354183023646140.rp l Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Reading ASK request file... Saved to: C:\InfinityBox\BEST\354183023646140.ask Done! Unlock procedure started... Phone Imei: 354183023646140 Checking locks... Conf key : 0000000000000000 Provider key : 2080100000000000 Provider : Orange + France Telecom Itineris;France Counters : Key 0 [3] , Fbus 0 [10] Blocks : 2 LOCK STATUS : ============================= BLK : 1 Lock1:Close BLK : 2 Lock1:Close ============================= LOCKS : Closed ============================= PA_SL2 phone detected... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006400C192101031103 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 1900020A01710052D428376CF58EB4A47CAB77F0 CMT MODE ID : 00 CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE CMT ROM ID : 4B9B75103E691FF8 CMT : Sending 2nd loader... CMT Loader sent, Boot Ok rap= 1900020A01710052D428376CF58EB4A47CAB77F0 hash= CAEEBB65D3C48E6DC73B49DC5063A2EE key= 77553C82CF9717C7C57B08A810EF99BE8296798F Init Service mode... Wait... Key file updated... Using F-bus count... Sending code 855002714919214 Level : 7 to SimLock Server... Simlock Server Answer: Unlock code Accepted! Done! Reading Phone Info.... Connected phone - Nokia 5800 XpressMusic Software ver : V ICPR72_08w47 24-11-08 RM-356 (c) Nokia IMEI : 354183023646140 Ape Ver : V 11.0.008 APE Var : V 11.0.008 ROFS1V 11.0.008 11.0.008.229.02 APE ADSP: 256 DSP Ver : ICPR72_08w47 APE Test: rm356_ENO_x_2008_wk21v0.002 PPM : CNT : Product SN : C7B488930 Product code : 0576039 Base Prd.code: 0578897 Module code : Long Prod.SN : 0 Hardware info======= HWID : 1101 Retu : 16 Tahvo : 22 Batery: 4573 mV Camera: CMT BT: APE BT: APE HW: 256 LCDVer: RF ic : 17141715 Lock info =========== IMEI : 354183023646140 IMEI spNet : IMEI svNet : Conf key : 0000000000000000 Provider key : 2080100000000000 Provider : Orange + France Telecom Itineris;France Counters : Key 0 [3] , Fbus 0 [10] Blocks : 2 LOCK STATUS : ============================= BLK : 1 Lock1:Open BLK : 2 Lock1:Open ============================= LOCKS : All Open ============================= User code : Crypted UserDataExLevel : Low [Gallery] Done! |
| |
| The Following 4 Users Say Thank You to malek_bh For This Useful Post: |
|
05-07-2011, 09:28
| #2208 (permalink) |
| No Life Poster   Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| Core version : 1.20 , Rev : 4.0 Selected FlashSettings : Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm237__07.30.mcusw PPM : rm237__07.30.ppm_c CNT : rm237__07.30.image_ora_pl_games_128 Flashing phone now... Check files done... -> SWversion check skipped : UserIni mode selected Getting product info... RAP_BOOT: 0901010002010000 RAP_PUBLIC: 245001095E9B7B567A25ED9DA56D7709BF69C892 CMT_ROOTKEY: BAF3A9C3DBFA8454937DB77F2B8852B1 RAP_PAPUBKEY: C0E691EA16A7593A9BB28832D7312A39F7ED668D Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm237__07.30.image_ora_pl_games_128 ConvertImage: Page Size is 128K, no need convert Loader len: 253888, CHK: 17DB ADL -> Sending loader... Update Server code succesfully sent to phone! TIME : Boot time : 00:00:03 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm237__07.30.mcusw Found 9 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT Result: 0000 Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT Result: 0000 Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT Result: 0000 Erasing area 0x01060000 - 0x01067FFF, NOR, CMT Result: 0000 Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:55 Write : Processing rm237__07.30.mcusw Total 945 [945/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [PAPUBKEYS] CMT : PAPUBKEYS skip, already sent CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [PMM_CONF] CMT : Writing Hash CERT [SBIF_CONF] TIME : Write time : 00:00:43 MCU Write done ===Flashing [PPM]=== Erase : Processing rm237__07.30.ppm_c Found 1 areas to erase Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:35 Write : Processing rm237__07.30.ppm_c Total 240 [240/0/0] blocks to write, writing... TIME : Write time : 00:00:11 PPM Write done ===Flashing [CNT]=== Erase : Processing rm237__07.30.image_ora_pl_games_128 Found 1 areas to erase Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:46 Write : Processing rm237__07.30.image_ora_pl_games_128 Total 296 [296/0/0] blocks to write, writing... TIME : Write time : 00:00:14 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:05:27 Reboot phone now... Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:05:50 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Phone disconected! Connect phone on selected interface... |
| |
| The Following User Says Thank You to sameera For This Useful Post: |
|
05-07-2011, 09:29
| #2209 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| Core version : 1.20 , Rev : 4.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm638__07.10.mcusw PPM : rm638__07.10.ppm_meac CNT : rm638__07.10.image_meac_0594670_005 Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Check communication with phone.... ADL req restart Communication verify done... Preparing... Gathering phone info... Check communication with phone... Reboot.... Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600000001020C192102054100 CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 2330030C672B54406D91E032CD309F50BF3A9C44 ASIC MODE ID: 00 ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D ROM ID: 67E82268F29CEA60 Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.10.0 Processing RAWLOADER... FLIC : 003000EC Req : XSR 1.6 Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.10.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] ADL: phone is in flash mode ===Flashing [MCU]=== Erase : Processing rm638__07.10.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm638__07.10.mcusw CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [ISA+DYNSW] Total writen 125 blocks TIME : Write time : 00:00:31 MCU Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [PPM]=== Erase : Processing rm638__07.10.ppm_meac Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm638__07.10.ppm_meac Total writen 25 blocks TIME : Write time : 00:00:07 PPM Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [CNT]=== Erase : Processing rm638__07.10.image_meac_0594670_005 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm638__07.10.image_meac_0594670_005 Total writen 54 blocks TIME : Write time : 00:00:16 CNT Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ADL: Close_Session Content: 000300000000010000000100000000 ADL: Reboot Flashing done! Total flash time : 00:00:57 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 6303i classic Software Info: V 07.10 25-03-10 RM-638 (c) Nokia IMEI: 354345047932042 PPM version : V 07.10 25-03-10 RM-638 (c) Nokia MEC Product code: 0594551 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 34 certs Data exist, skip certificate repair... AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:02:23 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! Phone disconected! Connect phone on selected interface... |
| |
| The Following 3 Users Say Thank You to sameera For This Useful Post: |
|
05-07-2011, 11:49
| #2210 (permalink) |
| Product Supporter   Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| Connect phone on selected interface... Core version : 1.20 , Rev : 4.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : C5F02102_rm495__07.97.mcusw PPM : 4BB8AA07_rm495__07.97.ppm_mena_a1SAEED CNT : E24393CE_rm495__07.97.image_mena_a1_red Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006030C192101033000 CPU ID : RAP3Gv3 , Features : No any extended features RAP_PUB: 0BF00004A58C8E569DA98A2042DBA4D91615CF22 CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:06 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing C5F02102_rm495__07.97.mcusw Found 6 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT Result: 0000 Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT Result: 0000 Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:58 Write : Processing C5F02102_rm495__07.97.mcusw Total 1178 [1178/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] TIME : Write time : 00:01:32 MCU Write done ===Flashing [PPM]=== Erase : Processing 4BB8AA07_rm495__07.97.ppm_mena_a1SAEED Found 1 areas to erase Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:49 Write : Processing 4BB8AA07_rm495__07.97.ppm_mena_a1SAEED Total 382 [382/0/0] blocks to write, writing... TIME : Write time : 00:00:30 PPM Write done ===Flashing [CNT]=== Erase : Processing E24393CE_rm495__07.97.image_mena_a1_red Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:03:23 Checking content info... Check Image : Content size is 128k, use direct write mode Write : Processing E24393CE_rm495__07.97.image_mena_a1_red Total 656 [656/0/0] blocks to write, writing... TIME : Write time : 00:01:10 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:09:24 Reboot phone now... -> Flashing Failed!  Maybee HW error, or Downgrade try???!Anyway - try reinsert battery and PowerUp phone manualy Connect phone on selected interface... Done! Elapsed: 00:11:49 Connect phone on selected interface... Core version : 1.20 , Rev : 4.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm411__07.23.mcusw PPM : rm411__07.23.ppm_mb CNT : rm411__07.23.image_mb_b_red Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006030C192101033000 CPU ID : RAP3Gv3 , Features : No any extended features RAP_PUB: 09500204910D7D56E42DA9339CE20BC9BC1CA0DB CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:06 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm411__07.23.mcusw Found 6 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT Result: 0000 Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT Result: 0000 Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:03 Write : Processing rm411__07.23.mcusw Total 1289 [1289/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] TIME : Write time : 00:01:13 MCU Write done ===Flashing [PPM]=== Erase : Processing rm411__07.23.ppm_mb Found 1 areas to erase Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:50 Write : Processing rm411__07.23.ppm_mb Total 394 [394/0/0] blocks to write, writing... TIME : Write time : 00:00:24 PPM Write done ===Flashing [CNT]=== Erase : Processing rm411__07.23.image_mb_b_red Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:04:51 Checking content info... Check Image : Content size is 128k, use direct write mode Write : Processing rm411__07.23.image_mb_b_red Total 504 [504/0/0] blocks to write, writing... TIME : Write time : 00:00:27 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:09:50 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 5220 XpressMusic Software Info: V 07.23 17-07-09 RM-411 (c) Nokia IMEI: 356840025788059 PPM version : V 07.23 17-07-09 RM-411 (c) Nokia MB Product code: 0563611 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:11:14 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface... |
| |
| The Following 3 Users Say Thank You to saeedullah_khan For This Useful Post: |
|
05-07-2011, 11:49
| #2211 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| registered to: saeedullah_khan Connect phone on selected interface... Core version : 1.20 , Rev : 4.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm237__07.30.mcusw PPM : rm237__07.30.ppm_SAEED CNT : rm237__07.30.image_c_tr_blue_128 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006010C192101001101 CPU ID : RAP3Gv3 , Features : No any extended features RAP_PUB: 1E10011529B47C569183676BCFA1B0D2441C214E CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm237__07.30.mcusw Found 9 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT Result: 0000 Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT Result: 0000 Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT Result: 0000 Erasing area 0x01060000 - 0x01067FFF, NOR, CMT Result: 0000 Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:05 Write : Processing rm237__07.30.mcusw Total 945 [945/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [PAPUBKEYS] CMT : PAPUBKEYS skip, already sent CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [PMM_CONF] CMT : Writing Hash CERT [SBIF_CONF] TIME : Write time : 00:00:52 MCU Write done ===Flashing [PPM]=== Erase : Processing rm237__07.30.ppm_SAEED Found 1 areas to erase Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:35 Write : Processing rm237__07.30.ppm_SAEED Total 203 [203/0/0] blocks to write, writing... TIME : Write time : 00:00:11 PPM Write done ===Flashing [CNT]=== Erase : Processing rm237__07.30.image_c_tr_blue_128 Found 1 areas to erase Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:54 Checking content info... Resetting phone... Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm237__07.30.image_c_tr_blue_128 ConvertImage: Page Size is 128K, no need convert Loader len: 253888, CHK: 17DB ADL -> Sending loader... Reset connection... ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok Write : Processing rm237__07.30.image_c_tr_blue_128 Total 240 [240/0/0] blocks to write, writing... TIME : Write time : 00:00:13 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:05:51 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 3110c Software Info: V 07.30 07-05-09 RM-237 (c) Nokia. IMEI: 356852026011290 PPM version : V 07.30 07-05-09 RM-237 (c) Nokia. B Product code: 0544325 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:07:31 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
| The Following 3 Users Say Thank You to saeedullah_khan For This Useful Post: |
|
05-07-2011, 11:50
| #2212 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| registered to: saeedullah_khan Connect phone on selected interface... UFS S/N 8**** boot - Ok Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Resetting selected items... Check phone mode... Phone in PowerOFF mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:12 Reading Phone Info.... SW ver : V 02.51 29-07-10 RM-689 (c) Nokia IMEI : 353794040800915 PPM : V 02.51 29-07-10 RM-689 (c) Nokia IC PCode : 059B369 BPCode : 0597858 HWID : 3001 LCDVer : UNKWN: IDs: 00:00:00 IMEI : 353794040800915 Sl Conf : 001-01-00000000000 Sl Prof : 000000000003000-2 Sl Aux : 000B0000 Hw Sig : 9A60F4EBE0F900AC Provider : Default Test Operator Lock info: Block 1 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 2 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 3 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 4 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 5 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 6 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 7 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Done! Resetting User Code to default (12345)... Code reset done, now it 12345 Done |
| |
| The Following 3 Users Say Thank You to saeedullah_khan For This Useful Post: |
|
05-07-2011, 12:16
| #2213 (permalink) |
| Freak Poster Join Date: Jun 2007 Location: ALGERIE-GSM Age: 33
Posts: 276
Member: 520327 Status: Offline Sonork: 100.1636717 Thanks: 392
Thanked 61 Times in 35 Posts
| e51 flash PPM only done: card found: S/N ******* registered to: malek Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Read and Check phone data... ---------------------- RAP_BOOT: 0B01010302010000 RAP_PUB: 09E000045075005265EB7D9B7D5E8012F486A247 CMT_ROOT: CAEEBB65D3C48E6DC73B49DC5063A2EE RAP_PAPUB: 35AC54F8E31BE1357AB78D73834F020906331653 ---------------------- Live Test Ok! ---------------------- CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND] ------------------------ SDD Key status : SD Data is Ok SimLock status : SimLock is Ok Security status : Security is Ok PA_SimLock Version : PA_SL2 phone detected Done! Phone disconected! Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Core version : 1.20 , Rev : 4.0 Selected FlashSettings : PPM only Check FlashFiles, Please, wait... Files Set for Flashing : PPM : rm244_2203437_prd.v08 Flashing phone now... Check files done... -> SWversion check skipped : Custom mode selected Backup CRT308 data... CRT308 Backup Created... SimLock Data saved... SimLock Key saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\359330023125691_SI M_2nd.rpl Check communication with phone.... ADL req restart Communication verify done... Preparing... Gathering phone info... Check communication with phone... Reboot.... Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101031103 CPU ID : RAPIDO v11 , Features : Dead-Test EM0 ID: 00000295 EM1 ID: 00000B22 PUBLIC ID: 09E000045075005265EB7D9B7D5E8012F486A247 ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP ... Processing PASUBTOC ... Boot Done! TIME : Boot time : 00:00:04 Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 Waiting for response: 26 Waiting for response: 25 Waiting for response: 24 Waiting for response: 23 Waiting for response: 22 Waiting for response: 21 Waiting for response: 20 Waiting for response: 19 ADL Server confirm flashmode! Get req info : empty ADL : ASIC CMT select Ok ===Flashing [PPM]=== Erase : Processing rm244_2203437_prd.v08 Found 1 areas to erase Erasing area 0x04A00000 - 0x068FFFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing rm244_2203437_prd.v08 Total 153 [153/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFX] TIME : Write time : 00:00:29 PPM Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:29 Reboot phone now... Afterflash not selected, skip Done! Elapsed: 00:00:49 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Phone disconected! |
| |
| The Following 3 Users Say Thank You to malek_bh For This Useful Post: |
|
05-07-2011, 15:05
| #2214 (permalink) |
| No Life Poster  Join Date: Oct 2007 Location: Unknown
Posts: 883
Member: 603971 Status: Offline Sonork: icq {608070578} Thanks: 1,791
Thanked 702 Times in 336 Posts
|  x2 Rm-627 Super fast flashing Speed. 12sec Only flashing logo Code: --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000000000000022000509200C0000 CPU ID : BroadCom 21351 , Features : Dead-Test, USBCRT, FullUSB EM0 ID: 00005361 PUBLIC ID: 0000000000C8E2018F963600C3DBF5507B29BEBF ASIC MODE ID: 00 ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E ROM ID: DE56D582BDDE7A3A Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 11.10.0 Processing RAWLOADER... FLIC : 00300020 Req : XSR 1.6 Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 11.10.0 Processing PASUBTOC ... Processing ALG ... Boot Done! :) TIME : Boot time : 00:00:01 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL: Check mode Select ASIC [C900] ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... No any CRT data (MCU damaged/CERT erased), skip saving ===Flashing [MCU]=== Erase : Processing rm618__08.17.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__08.17.mcusw CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [ISA+DYNSW] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [UPDAPP] Total writen 511 blocks TIME : Write time : 00:00:05 MCU Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [PPM]=== Erase : Processing rm618__08.17.ppm_meah Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__08.17.ppm_meah Total writen 107 blocks TIME : Write time : 00:00:01 PPM Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [CNT]=== Erase : Processing rm618__08.17.image_meah_0595300_007 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm618__08.17.image_meah_0595300_007 Total writen 344 blocks TIME : Write time : 00:00:03 CNT Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ADL: Close_Session Content: 000300000000010000000100000000 ADL: Reboot Flashing done! Total flash time : 00:00:12 Reboot phone now...  |
| |
| The Following 4 Users Say Thank You to ahmadge For This Useful Post: |
|
05-07-2011, 15:05
| #2215 (permalink) |
| Freak Poster  Join Date: Mar 2008 Location: I Don,t Know Age: 27
Posts: 384
Member: 718939 Status: Offline Thanks: 29
Thanked 82 Times in 49 Posts
| 6303 fash done with usb --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! RAP_PUB: 29B001040FB08D56EB4063E40AC6612A817EE4E6 CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:08 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm443__10.10.mcusw Found 8 areas to erase Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x0005FFFF, NOR, CMT Result: 0000 Erasing area 0x00060000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x0015FFFF, NOR, CMT Result: 0000 Erasing area 0x00160000 - 0x0023FFFF, NOR, CMT Result: 0000 Erasing area 0x01740000 - 0x0191FFFF, NOR, CMT Result: 0000 Erasing area 0x00240000 - 0x0173FFFF, NOR, CMT Result: 0000 Erasing area 0x022E0000 - 0x0261FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:03:16 Write : Processing rm443__10.10.mcusw Total 1597 [1597/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [ISA+DYNSW] TIME : Write time : 00:01:21 MCU Write done ===Flashing [PPM]=== Erase : Processing BAF5F5B3_rm443__10[1].10.ppm_mb Found 1 areas to erase Erasing area 0x01920000 - 0x022DFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:02 Write : Processing BAF5F5B3_rm443__10[1].10.ppm_mb Total 367 [367/0/0] blocks to write, writing... TIME : Write time : 00:00:18 PPM Write done ===Flashing [CNT]=== Erase : Processing rm443__10.10.image_mb_matt_black Found 2 areas to erase Erasing area 0x02620000 - 0x029BFFFF, NOR, CMT Result: 0000 Erasing area 0x029C0000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:03:31 Checking content info... Check Image : Content size is 128k, use direct write mode Write : Processing rm443__10.10.image_mb_matt_black Total 560 [560/0/0] blocks to write, writing... TIME : Write time : 00:00:28 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:09:59 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 6303 classic Software Info: V 10.10 18-11-09 RM-443 (c) Nokia IMEI: 351505044007360 PPM version : V 10.10 18-11-09 RM-443 (c) Nokia MB Product code: 0569441 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 34 certs Data exist, skip certificate repair... Set phone to Normal mode... AfterFlash operations done... Done! Elapsed: 00:10:58 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
| The Following 4 Users Say Thank You to HAMMZA_MOBILES For This Useful Post: |
|
05-07-2011, 15:37
| #2216 (permalink) |
| Freak Poster Join Date: Jun 2007 Location: ALGERIE-GSM Age: 33
Posts: 276
Member: 520327 Status: Offline Sonork: 100.1636717 Thanks: 392
Thanked 61 Times in 35 Posts
| 3110c flash ok FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 1A20000398567E5682235983C45051564921615F CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 89810089 , CMT , NOR CMT Flash ID : 89810089 < INTEL => NU48F256 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500 Transmission mode : Dual (Ddr, TX2) Boot Done! CMT : Read NPC certificate... Cert size : 12288 byte(s) IMEI : 354206033600284 CMT : Read CCC certificate... Cert size : 8192 byte(s) CMT : Read HWC certificate... Cert size : 12288 byte(s) CMT : Read VARIANT certificate... Cert size : 20480 byte(s) Cert Read done! Init Service mode... Wait... Init Service Mode Failed! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\354206033600284_CR T_2nd.rpl Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101001101 CMT EM0 ID : 00000232 CMT EM1 ID : 00000353 CMT PUB ID : 1A20000398567E5682235983C45051564921615F CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 191EC665DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 89810089 , CMT , NOR CMT Flash ID : 89810089 < INTEL => NU48F256 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500 Transmission mode : Dual (Ddr, TX2) Boot Done! Transmission mode : Dual (Ddr, TX2) Erase : Processing rm237__07.30.mcusw Found 9 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x00000000 - 0x000006BF CMT , NOR , Area : 0x000006C0 - 0x0001FFFF CMT , NOR , Area : 0x00020000 - 0x0007FFFF CMT , NOR , Area : 0x00080000 - 0x000DFFFF CMT , NOR , Area : 0x00100000 - 0x001FFFFF CMT , NOR , Area : 0x00200000 - 0x0031FFFF CMT , NOR , Area : 0x00320000 - 0x0105FFFF CMT , NOR , Area : 0x01060000 - 0x01067FFF CMT , NOR , Area : 0x01068000 - 0x0107FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:01:26 Transmission mode : Dual (Ddr, TX2) Write : Processing rm237__07.30.mcusw CMT: Writing Hash CERT [NOLO] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [PMM_CONF] CMT: Writing Hash CERT [SBIF_CONF] Total writen 943 blocks TIME : Write time : 00:01:47 Transmission mode : Dual (Ddr, TX2) Erase : Processing rm237__07.30.ppm_c Found 1 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01080000 - 0x0151FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:16 Transmission mode : Dual (Ddr, TX2) Write : Processing rm237__07.30.ppm_c Total writen 240 blocks TIME : Write time : 00:00:27 ConvertImage: Processing rm237__07.30.image_c_tr ConvertImage: Page Size is 64K, converting... ConvertImage: File converted Transmission mode : Dual (Ddr, TX2) Erase : Processing rm237__07.30.image_c_tr_128 Found 1 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01520000 - 0x01FDFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:42 Transmission mode : Dual (Ddr, TX2) Write : Processing rm237__07.30.image_c_tr_128 Total writen 240 blocks TIME : Write time : 00:00:27 Init Service mode... Wait... Reading Phone Info.... Connected phone - Nokia 3110c Software Info: V 07.30 07-05-09 RM-237 (c) Nokia. IMEI: 354206033600284 Product code: 0544330 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! |
| |
| The Following 3 Users Say Thank You to malek_bh For This Useful Post: |
|
05-08-2011, 06:39
| #2217 (permalink) |
| Temporary banned !! Join Date: Apr 2010 Location: saudi arabia Age: 35
Posts: 1,456
Member: 1277468 Status: Offline Sonork: 100.1603661 Thanks: 1,049
Thanked 689 Times in 351 Posts
| nokia 5130 usb flashing done nokia 5130 usb flashing done with bb5 best dongle Code: Connect phone on selected interface... Connect phone on selected interface... Core version : 1.20 , Rev : 4.0 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm495__06.94.mcusw PPM : rm495__06.94.ppm_mena_b CNT : rm495__06.94.image_mena_b_blu Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006030C192101033000 CPU ID : RAP3Gv3 , Features : No any extended features RAP_PUB: 25A0001412938C56696F27C30D508F788FBA1297 CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:06 Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm495__06.94.mcusw Found 6 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT Result: 0000 Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT Result: 0000 Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:12 Write : Processing rm495__06.94.mcusw Total 1177 [1177/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] TIME : Write time : 00:01:24 MCU Write done ===Flashing [PPM]=== Erase : Processing rm495__06.94.ppm_mena_b Found 1 areas to erase Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:27 Write : Processing rm495__06.94.ppm_mena_b Total 415 [415/0/0] blocks to write, writing... TIME : Write time : 00:00:32 PPM Write done ===Flashing [CNT]=== Erase : Processing rm495__06.94.image_mena_b_blu Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:37 Checking content info... Check Image : Content size is 128k, use direct write mode Write : Processing rm495__06.94.image_mena_b_blu Total 528 [528/0/0] blocks to write, writing... TIME : Write time : 00:00:40 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:05:54 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 5130c-2 Software Info: V 06.94 21-07-09 RM-495 (c) Nokia IMEI: 35829303066???? PPM version : V 06.94 21-07-09 RM-495 (c) Nokia MEN Product code: 0572179 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Product code update... Set phone to Normal mode... AfterFlash operations done... Done! Elapsed: 00:07:04 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface... br:. shabir97 Last edited by shabir97; 05-08-2011 at 06:44. |
| |
| The Following 3 Users Say Thank You to shabir97 For This Useful Post: |
|
05-08-2011, 09:54
| #2218 (permalink) |
| Insane Poster Join Date: Dec 2005 Location: GUJARAT.INDIA
Posts: 85
Member: 205176 Status: Offline Thanks: 5
Thanked 11 Times in 5 Posts
| nokia 3110c blinking repair Connect phone on selected interface... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm237__07.21.mcusw PPM : rm237__07.21.ppm_mr CNT : rm237__07.21.image_ctv_india_mr Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! RAP_PUB: 1A20001087357C56A782BDC3496286B518C011BB CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm237__07.21.mcusw Found 9 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT Result: 0000 Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT Result: 0000 Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT Result: 0000 Erasing area 0x01060000 - 0x01067FFF, NOR, CMT Result: 0000 Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:08 Write : Processing rm237__07.21.mcusw Total 944 [944/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [PAPUBKEYS] CMT : PAPUBKEYS skip, already sent CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [PMM_CONF] CMT : Writing Hash CERT [SBIF_CONF] TIME : Write time : 00:00:44 MCU Write done ===Flashing [PPM]=== Erase : Processing rm237__07.21.ppm_mr Found 1 areas to erase Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:36 Write : Processing rm237__07.21.ppm_mr Total 227 [227/0/0] blocks to write, writing... TIME : Write time : 00:00:11 PPM Write done ===Flashing [CNT]=== Erase : Processing rm237__07.21.image_ctv_india_mr Found 1 areas to erase Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:47 Checking content info... Resetting phone... Error while resetting phone, MCU start error Looks like HW error or downgrade try... Flashing failed on content check : CMT not run - > Try Flash CNT ONLY from dead mode Connect phone on selected interface... -> Error while flashing... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm237__07.30.mcusw PPM : rm237__07.30.ppm_c CNT : rm237__07.30.image_c_tr Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! RAP_PUB: 1A20001087357C56A782BDC3496286B518C011BB CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm237__07.30.mcusw Found 9 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT Result: 0000 Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT Result: 0000 Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT Result: 0000 Erasing area 0x01060000 - 0x01067FFF, NOR, CMT Result: 0000 Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:10 Write : Processing rm237__07.30.mcusw Total 945 [945/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [PAPUBKEYS] CMT : PAPUBKEYS skip, already sent CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [PMM_CONF] CMT : Writing Hash CERT [SBIF_CONF] TIME : Write time : 00:00:44 MCU Write done ===Flashing [PPM]=== Erase : Processing rm237__07.30.ppm_c Found 1 areas to erase Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:36 Write : Processing rm237__07.30.ppm_c Total 240 [240/0/0] blocks to write, writing... TIME : Write time : 00:00:11 PPM Write done ===Flashing [CNT]=== Erase : Processing rm237__07.30.image_c_tr Found 1 areas to erase Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:01:47 Checking content info... Resetting phone... Checking CNT sector PN<>FL PN CNT sector : 128 kb Converted content already exist, skip convert and using 128k Loader len: 253888, CHK: 17DB ADL -> Sending loader... Reset connection... ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok Write : Processing rm237__07.30.image_c_tr_128 Total 240 [240/0/0] blocks to write, writing... TIME : Write time : 00:00:11 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:05:42 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 3110c Software Info: V 07.30 07-05-09 RM-237 (c) Nokia. IMEI: 356418029169194 PPM version : V 07.30 07-05-09 RM-237 (c) Nokia. C Product code: 0566963 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:06:33 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Phone disconected! Connect phone on selected interface.. |
| |
| The Following 3 Users Say Thank You to ketan.d.chauhan For This Useful Post: |
|
05-08-2011, 10:21
| #2219 (permalink) |
| Insane Poster Join Date: Dec 2005 Location: GUJARAT.INDIA
Posts: 85
Member: 205176 Status: Offline Thanks: 5
Thanked 11 Times in 5 Posts
| phone book save & flash 5130 nokia BackUp UserData : [PhoneBook] Generation mode : [S40] Reading Phonebook... csv file save to C:\Documents and Settings\KETAN\Desktop\RM-495 Nokia 5130c-2_354179039918648.csv 301 phonebook records are found! VCF Records saved to : BEST\Phones_Data\IMEI\ Saved to: C:\Documents and Settings\KETAN\Desktop\RM-495 Nokia 5130c-2_354179039918648.S4pb Done... Core version : 1.18 , Rev : 3.0 Selected FlashSettings : Manual Files Set for Flashing : MCU : rm495__07.95.mcusw PPM : rm495__07.95.ppm_mh CNT : 54A3221A_rm495__07.95.image_CTV_INDIA_HINDI_red_RE FRESH_128 Check FlashFiles, Please, wait... -> SWversion check skipped : Manual mode selected Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 24500118F1137E560CDC13A687267A27C42718AD CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : 917F11196FDB7378C18EF7260698CA4489DCA02700 Transmission mode : Dual (Ddr, TX2) Boot Done! Transmission mode : Dual (Ddr, TX2) Erase : Processing rm495__07.95.mcusw Found 6 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x00000000 - 0x000006BF CMT , NOR , Area : 0x000006C0 - 0x0001FFFF CMT , NOR , Area : 0x00040000 - 0x000BFFFF CMT , NOR , Area : 0x000C0000 - 0x0013FFFF CMT , NOR , Area : 0x00140000 - 0x0137FFFF CMT , NOR , Area : 0x01380000 - 0x0151FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:01:27 Transmission mode : Dual (Ddr, TX2) Write : Processing rm495__07.95.mcusw CMT: Writing Hash CERT [NOLO] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] Total writen 1169 blocks TIME : Write time : 00:02:13 Transmission mode : Dual (Ddr, TX2) Erase : Processing rm495__07.95.ppm_mh Found 1 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01520000 - 0x01DBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:33 Transmission mode : Dual (Ddr, TX2) Write : Processing rm495__07.95.ppm_mh Total writen 450 blocks TIME : Write time : 00:00:51 ConvertImage: Processing 54A3221A_rm495__07.95.image_CTV_INDIA_HINDI_red_RE FRESH_128 ConvertImage: Page Size is 128K, no need convert Transmission mode : Dual (Ddr, TX2) Erase : Processing 54A3221A_rm495__07.95.image_CTV_INDIA_HINDI_red_RE FRESH_128 Found 2 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF CMT , NOR , Area : 0x02160000 - 0x03FBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:03:27 Transmission mode : Dual (Ddr, TX2) Write : Processing 54A3221A_rm495__07.95.image_CTV_INDIA_HINDI_red_RE FRESH_128 Total writen 540 blocks TIME : Write time : 00:01:00 Init Service mode... Wait... Reading Phone Info.... Connected phone - Nokia 5130c-2 Software Info: V 07.95 03-02-10 RM-495 (c) Nokia IMEI: 354179039918648 Product code: 0571983 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Restoring UserData : [PhoneBook] Generation mode : [S40] Check phone mode... Phone in Test mode Seting Local mode... wait... Local mode set Writing Phonebook... 301 phonebook records write ok! Done... Phone disconected! |
| |
| The Following 3 Users Say Thank You to ketan.d.chauhan For This Useful Post: |
|
05-08-2011, 13:11
| #2220 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| registered to: wc2sime Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Reading Phone Info.... Connected phone - Nokia 7210 Supernova Software ver : V 07.23 17-07-09 RM-436 (c) Nokia IMEI : 359310022435978 Ape Ver : APE Var : APE ADSP: DSP Ver : ICPR72_09w17 APE Test: PPM : V 07.23 17-07-09 RM-436 (c) Nokia I CNT : Product SN : DTC852341 Product code : 0566902 Base Prd.code: 0563951 Module code : 0203868 Long Prod.SN : 0 Hardware info======= HWID : 1000 Retu : 15 Tahvo : 22 Batery: 3823 mV Camera: CMT BT: 2222-143C APE BT: APE HW: LCDVer: SHARP RF ic : Lock info =========== IMEI : 359310022435978 IMEI spNet : 3A 95 13 00 22 34 95 07 IMEI svNet : 33 95 13 00 22 34 95 47 F0 Conf key : 0000000000000000 Provider key : 2440700000000000 Provider : AT&T;U.S.A. (3650) Counters : Key 0 [3] , Fbus 0 [10] Blocks : 7 LOCK STATUS : ============================= BLK : 1 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 2 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 3 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 4 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 5 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 6 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 7 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open ============================= LOCKS : All Open ============================= CRT308 Backup Created... User Code : 12145 MMC pwd : no any record found UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] Done! Core version : 1.20 , Rev : 4.0 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm436__07.23.mcusw PPM : rm436__07.23.ppm_i PPM2 : rm436__07.23.ppm_a CNT : rm436__07.23.image_i Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Getting product info... RAP_BOOT: 0803000302010000 RAP_PUBLIC: 1DD0000974EB7C5681FDCFA00338AD23173081B9 CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723 RAP_PAPUBKEY: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026 Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm436__07.23.image_i ConvertImage: Page Size is 128K, no need convert Loader len: 306432, CHK: 6CEB ADL -> Sending loader... Update Server code succesfully sent to phone! TIME : Boot time : 00:00:04 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm436__07.23.mcusw Found 6 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT Result: 0000 Erasing area 0x00140000 - 0x0119FFFF, NOR, CMT Result: 0000 Erasing area 0x011A0000 - 0x0133FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:03 Write : Processing rm436__07.23.mcusw Total 1170 [1170/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] TIME : Write time : 00:00:54 MCU Write done ===Flashing [PPM]=== Erase : Processing rm436__07.23.ppm_i Found 1 areas to erase Erasing area 0x01340000 - 0x01BDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:57 Write : Processing rm436__07.23.ppm_i Total 473 [473/0/0] blocks to write, writing... TIME : Write time : 00:00:22 PPM Write done ===Flashing [PPM2]=== Erase : Processing rm436__07.23.ppm_a Found 1 areas to erase Erasing area 0x01340000 - 0x01BDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:59 Write : Processing rm436__07.23.ppm_a Total 428 [428/0/0] blocks to write, writing... TIME : Write time : 00:00:20 PPM Write done ===Flashing [CNT]=== Erase : Processing rm436__07.23.image_i Found 2 areas to erase Erasing area 0x01BE0000 - 0x01F7FFFF, NOR, CMT Result: 0000 Erasing area 0x01F80000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:05:27 Write : Processing rm436__07.23.image_i Total 1416 [1416/0/0] blocks to write, writing... TIME : Write time : 00:01:08 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:12:13 Reboot phone now... Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:13:00 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Set phone in Normal mode... Restarting... Done! |
| |
| The Following 2 Users Say Thank You to sameera For This Useful Post: |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| thread | Thread Starter | Forum | Replies | Last Post |
| New Nokia Software!!!!!!! | Jefferson | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 73 | 05-15-2013 13:07 |
| Need software upgrade for Nokia 5110 | ptkrf | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 26 | 09-25-2012 02:41 |
| Sim card sleep mode problem with 6130 | ratzfatz | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 4 | 05-22-2012 11:13 |
| Help with 6110 | paulomt1 | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 3 | 05-25-2009 16:29 |
| Netmonitor with FBus???? | ratzfatz | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 4 | 06-09-1999 17:04 |
Linear Mode
