|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| |||||||
| Register | FAQ | Donate | Forum Rules | ★. iPhone Unlock .★ | -= JTAG BOOM =- | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
07-02-2011, 17:31
| #3016 (permalink) |
| No Life Poster  Join Date: May 2008 Location: sargodha Age: 26
Posts: 2,661
Member: 765909 Status: Offline Sonork: 100.1608098 Thanks: 577
Thanked 873 Times in 492 Posts
| card found: S/N 11A0:0118 registered to: delux_gsm Connect phone on selected interface... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual -> File : RX-51_2009SE_10.2010.13-2.UK-IRELAND_PR_EMMC_MR0_ARM.bin not found! Check it! Check FlashFiles, Please, wait... Bad file : RX-51_2009SE_10.2010.19-1.203.1_PR_LEGACY_203_ARM.bin Bad Flash files detected, will break procedure  Core version : 1.23 , Rev : 4.8 Selected FlashSettings : SafeFlash Check FlashFiles, Please, wait... -> Flash Files are NOT selected! You can Select: S40 : Any, but MCU need present in filelist S60 : Any, but CORE/MCU need present in filelist S60 APE : MCU+PPM, MCU+PPM+CNT Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual -> File : RX-51_2009SE_10.2010.13-2.UK-IRELAND_PR_EMMC_MR0_ARM.bin not found! Check it! Check FlashFiles, Please, wait... Bad file : RX-51_2009SE_10.2010.19-1.203.1_PR_LEGACY_203_ARM.bin Bad Flash files detected, will break procedure Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-505_22.0.110_prd.core.C00 PPM : RM-505_22.0.110_prd.rofs2.V15 PPM2 : RM-505_22.0.110_C01_prd.rofs3.fpsx CNT : RM505_507_22.0.110_uda_4_001.uda.fpsx APE : RM505_APE_ONLY_ENO_09w23_v0.072.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Can't verify Bootrom Try again...-> Error answer from BootRom -> 1. Try make battery charge -> 2. Try insert charger, without pressing poweron -> 3. Try change USB port, if driver hang - restart PC -> Boot fail... Flashing failed... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-505_22.0.110_prd.core.C00 PPM : RM-505_22.0.110_prd.rofs2.V15 PPM2 : RM-505_22.0.110_C01_prd.rofs3.fpsx CNT : RM505_507_22.0.110_uda_4_001.uda.fpsx APE : RM505_APE_ONLY_ENO_09w23_v0.072.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101031103 CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 08200101E7DA0158D5D3A917020D747CF7655E5D ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing RAP3NAND ... Processing PASUBTOC ... Processing PAPUBKEYS... Processing UPDAPP ... Boot Done!  TIME : Boot time : 00:00:03 Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 Waiting for response: 26 Waiting for response: 25 Waiting for response: 24 Waiting for response: 23 Waiting for response: 22 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-505_22.0.110_prd.core.C00 Found 4 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x0AB9FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_prd.core.C00 Total 477 [477/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:35 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-505_22.0.110_prd.rofs2.V15 Found 1 areas to erase Erasing area 0x079A0000 - 0x09C9FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_prd.rofs2.V15 Total 90 [90/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:07 PPM Write done ===Flashing [PPM2]=== Erase : Processing RM-505_22.0.110_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x09CA0000 - 0x0AB9FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_C01_prd.rofs3.fpsx Total 6 [6/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:00 PPM Write done ===Flashing [CNT]=== Erase : Processing RM505_507_22.0.110_uda_4_001.uda.fpsx Found 1 areas to erase Erasing area 0x0ABA0000 - 0x0F71FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM505_507_22.0.110_uda_4_001.uda.fpsx Total 36 [36/0/0] blocks to write, writing... TIME : Write time : 00:00:04 CNT Write done ===Flashing [APE]=== Erase : Processing RM505_APE_ONLY_ENO_09w23_v0.072.fpsx Found 1 areas to erase Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM505_APE_ONLY_ENO_09w23_v0.072.fpsx Total 16 [16/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS*ENO] TIME : Write time : 00:00:00 APE Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:50 Reboot phone now... Afterflash not selected, skip Done! Elapsed: 00:01:16 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Resetting selected items... Check phone mode... Phone in Local mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:09 |
 |
|
07-02-2011, 17:31
| #3017 (permalink) |
| No Life Poster Join Date: May 2008 Location: sargodha Age: 26
Posts: 2,661
Member: 765909 Status: Offline Sonork: 100.1608098 Thanks: 577
Thanked 873 Times in 492 Posts
| card found: S/N 11A0:0118 registered to: delux_gsm Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm208_m128_h20_ka_prod_406337400_c00_combined.bin PPM : rm208_m128_h20_ka_prod_406337400_v11_variant.bin CNT : rm208_cp_3.0.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Backup CRT308 data... CRT308 Backup Created Check communication with phone.... ADL Boot req Communication verify done... Preparing... Gathering phone info... RAP_BOOT: 0803000002010000 RAP_PUBLIC: 25A0010E74F80154CF97626F99115E07C45EBC81 CMT_ROOTKEY: BAF3A9C3DBFA8454937DB77F2B8852B1 RAP_PAPUBKEY: 0266638E9C2164FC6B5194ED596A6A251C699896 APE_ROOTKEY: 49A97E826B93BA20B7ED0B082475C005 Check communication with phone... CMT Loader len: 46272, CHK: D91D Sending CMT boot.... APE Loader len: 93696, CHK: 2512 Sending APE boot.... Boot done TIME : Boot time : 00:00:02 Reboot.... Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 Waiting for response: 26 ADL Server confirm flashmode! ADL : Auth skip ADL : ASIC CMT select Ok ADL : ASIC APE select Ok ===Flashing [MCU]=== Erase : Processing rm208_m128_h20_ka_prod_406337400_c00_combined.bin Found 6 areas to erase Erasing area 0x001E0000 - 0x00708315, NOR, CMT Result: 0000 Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x0009FFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00880000 - 0x0089FFFF, NOR, CMT Result: 0000 Erasing area 0x00F00000 - 0x00FDFFFF, NOR, CMT Result: 0000 Found 3 areas to erase Erasing area 0x00000000 - 0x0007FFFF, NAND, APE Result: 0000 Erasing area 0x00080000 - 0x000803FF, NAND, APE Result: 0000 Erasing area 0x000C0000 - 0x03CFFFFF, NAND, APE Result: 0000 Partitioning : Ok [4] TIME : Erase time : 00:00:53 Write : Processing rm208_m128_h20_ka_prod_406337400_c00_combined.bin Total 1519 [312/1207/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [ADL] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] APE : Writing Hash CERT [KEYS] APE : Writing Hash CERT [X-LOADER] APE : Writing Hash CERT [PRIMAPP] APE : Writing Hash CERT [SOS+LOADER] APE : Writing Hash CERT [ADL] APE : Writing Hash CERT [SOS+XZIP] APE : Writing Hash CERT [PASUBTOC] APE : Writing Hash CERT [PAPUBKEYS] APE : Writing Hash CERT [SOS*CORE] APE : Writing Hash CERT [SOS+ROFS] APE : Writing Hash CERT [SOS+ROFX] TIME : Write time : 00:03:48 MCU Write done ===Flashing [PPM]=== Erase : Processing rm208_m128_h20_ka_prod_406337400_v11_variant.bin Found 1 areas to erase Erasing area 0x02860000 - 0x03CFFFFF, NAND, APE Result: 0000 Partitioning : Ok [4] TIME : Erase time : 00:00:01 Write : Processing rm208_m128_h20_ka_prod_406337400_v11_variant.bin Total 1914 [0/1914/0] blocks to write, writing... APE : Writing Hash CERT [SOS+ROFX] TIME : Write time : 00:01:14 PPM Write done ===Flashing [CNT]=== Erase : Processing rm208_cp_3.0.fpsx Erase : No any region, skip erase TIME : Erase time : 00:00:00 Write : Processing rm208_cp_3.0.fpsx Total 9 [0/9/0] blocks to write, writing... TIME : Write time : 00:00:10 CNT Write done ================= ADL : End flashing ADL : Close CMT session Ok ADL : Close APE session Ok Flashing done! Total flash time : 00:06:09 Reboot phone now... Reading Phone Info.... Connected phone - Nokia E65 Software Info: V 4.0615.2 05-06-08 RM-208 (c) Nokia. IMEI: 353263019740528 Ape Version: 4.0633.74.00 04-09-08 RM-208 (c)Nokia Product code: 0552463 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:06:58 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok |
| |
|
07-02-2011, 17:32
| #3018 (permalink) |
| No Life Poster Join Date: May 2008 Location: sargodha Age: 26
Posts: 2,661
Member: 765909 Status: Offline Sonork: 100.1608098 Thanks: 577
Thanked 873 Times in 492 Posts
| card found: S/N 11A0:0118 registered to: delux_gsm Connect phone on selected interface... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm638__09.83.mcusw PPM : rm638__09.83.ppm_v CNT : rm638__09.83.image_v_0594567_008 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600000001020C192102054100 CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 2DC001152D4254405327AFDFB020718B7158BE0C ASIC MODE ID: 00 ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D ROM ID: 67E82268F29CEA60 Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.16.0 Processing RAWLOADER... FLIC : 003000EC Req : XSR 1.6 Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 354867044263956 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\354867044263956_CR T_2nd.rpl ===Flashing [MCU]=== Erase : Processing rm638__09.83.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm638__09.83.mcusw CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [ISA+DYNSW] Total writen 126 blocks TIME : Write time : 00:00:38 MCU Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [PPM]=== Erase : Processing rm638__09.83.ppm_v Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm638__09.83.ppm_v Total writen 29 blocks TIME : Write time : 00:00:10 PPM Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [CNT]=== Erase : Processing rm638__09.83.image_v_0594567_008 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm638__09.83.image_v_0594567_008 Total writen 89 blocks TIME : Write time : 00:00:32 CNT Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ADL: Close_Session Content: 000300000000000000000000000000 ADL: Reboot Flashing done! Total flash time : 00:01:22 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 6303i classic Software Info: V 09.83 21-09-10 RM-638 (c) Nokia IMEI: 354867044263956 PPM version : V 09.83 21-09-10 RM-638 (c) Nokia V Product code: 0599986 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:01:50 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
07-02-2011, 17:32
| #3019 (permalink) |
| No Life Poster Join Date: May 2008 Location: sargodha Age: 26
Posts: 2,661
Member: 765909 Status: Offline Sonork: 100.1608098 Thanks: 577
Thanked 873 Times in 492 Posts
| Connect phone on selected interface... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm618__08.25.mcusw PPM : 5F76C7DB_rm618__08.25.ppm_mi CNT : rm618__08.25.image_l_0595268_008 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000000000000022000509200C0000 CPU ID : BroadCom 21351 , Features : Dead-Test, USBCRT, FullUSB EM0 ID: 00005361 PUBLIC ID: 0000000000038A58E8C92BDA6B25191109EC51C6 ASIC MODE ID: 00 ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E ROM ID: DE56D582BDDE7A3A Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 11.16.0 Processing RAWLOADER... FLIC : 003000EC Req : XSR 1.6 Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 11.16.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:01 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] ADL: phone is in flash mode ===Flashing [MCU]=== Erase : Processing rm618__08.25.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__08.25.mcusw CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [ISA+DYNSW] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [UPDAPP] Total writen 511 blocks TIME : Write time : 00:00:05 MCU Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [PPM]=== Erase : Processing 5F76C7DB_rm618__08.25.ppm_mi Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing 5F76C7DB_rm618__08.25.ppm_mi Total writen 115 blocks TIME : Write time : 00:00:01 PPM Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [CNT]=== Erase : Processing rm618__08.25.image_l_0595268_008 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm618__08.25.image_l_0595268_008 Total writen 338 blocks TIME : Write time : 00:00:03 CNT Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ADL: Close_Session Content: 000300000000010000000100000000 ADL: Reboot Flashing done! Total flash time : 00:00:12 Reboot phone now... Reading Phone Info.... Connected phone - Nokia X2-00 Software Info: V 08.25 19-05-11 RM-618 (c) Nokia IMEI: 357898045326093 PPM version : V 08.25 19-05-11 RM-618 (c) Nokia MI Product code: 0595304 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Checking User Certificates... Total - 39 certs Data exist, skip certificate repair... AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:01:48 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
07-02-2011, 17:32
| #3020 (permalink) |
| No Life Poster Join Date: May 2008 Location: sargodha Age: 26
Posts: 2,661
Member: 765909 Status: Offline Sonork: 100.1608098 Thanks: 577
Thanked 873 Times in 492 Posts
| card found: S/N 11A0:0118 registered to: delux_gsm Connect phone on selected interface... Connect phone on selected interface... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm627_043.005_prd.core.fpsx PPM : rm627_043.005_33.01_APAC_QW1_prd.rofs2.fpsx PPM2 : rm627_043.005_206.01_CV_MY_prd.rofs3.fpsx CNT : rm627_043.005_U001.000_prd.uda.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000030000022600010007600C192102031104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00000C35 EM1 ID: 00000C30 PUBLIC ID: 2120020D594C57407C7D41229CDCBFDFB40E2DF9 ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0 Processing RAWLOADER... FLIC : 005000EC Req : XSR 1.6 Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL: Check mode Select ASIC [C900] ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 352713042945586 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\352713042945586_CR T.rpl ===Flashing [MCU]=== Erase : Processing rm627_043.005_prd.core.fpsx Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm627_043.005_prd.core.fpsx CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [SOS+PMML] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [SOS*UPDAPP] CMT: Writing Hash CERT [SOS*DSP0] CMT: Writing Hash CERT [LDSP] CMT: Writing Hash CERT [SOS*ISASW] CMT: Writing Hash CERT [SOS+CORE] CMT: Writing Hash CERT [SOS+ROFS1] Total writen 376 blocks TIME : Write time : 00:00:15 MCU Write done ADL: Request programm status NAND status : 00000007 / 00000007 / 00000000 ===Flashing [PPM]=== Erase : Processing rm627_043.005_33.01_APAC_QW1_prd.rofs2.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm627_043.005_33.01_APAC_QW1_prd.rofs2.fpsx CMT: Writing Hash CERT [SOS+ROFS2] Total writen 213 blocks TIME : Write time : 00:00:09 PPM Write done ADL: Request programm status NAND status : 00000007 / 00000007 / 00000000 ===Flashing [PPM2]=== Erase : Processing rm627_043.005_206.01_CV_MY_prd.rofs3.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm627_043.005_206.01_CV_MY_prd.rofs3.fpsx CMT: Writing Hash CERT [SOS+ROFS3] Total writen 2 blocks TIME : Write time : 00:00:00 PPM Write done ADL: Request programm status NAND status : 00000007 / 00000007 / 00000000 ===Flashing [CNT]=== Erase : Processing rm627_043.005_U001.000_prd.uda.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm627_043.005_U001.000_prd.uda.fpsx Total writen 145 blocks TIME : Write time : 00:00:06 CNT Write done ADL: Request programm status NAND status : 00000007 / 00000007 / 00000000 ADL: Close_Session Content: 000300000000070000000700000000 ADL: Reboot Flashing done! Total flash time : 00:00:35 Reboot phone now... Reading Phone Info.... Connected phone - Nokia X5-01 Software Info: V ICPR82_10w18.7.4 16-08-10 RM-627 (c) Nokia IMEI: 352713042945586 Ape Version: 043.005 Product code: 059D401 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:01:06 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok |
| |
| The Following User Says Thank You to delux_gsm For This Useful Post: |
|
07-02-2011, 18:46
| #3021 (permalink) |
| Product Supporter   Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| registered to: saeedullah_khan Connect phone on selected interface... UFS S/N 113742 boot - Ok Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Files Set for Flashing : CNT : rm495__07.95.image_ei_red Check FlashFiles, Please, wait... -> SWversion check skipped : Custom mode selected Backup enabled, Will read Certificates now... SL3 Simlock read ... ok WMDRM read ... ok CRT308 Backup Created Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 0EF001041C097E56F829190A9D7A1D2A37F86CC0 CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration MCU Cfg Ok , 03 FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027 Transmission mode : Dual (Ddr, TX2) Boot Done! CMT : Read NPC certificate... Cert size : 20480 byte(s) IMEI : 356053034517176 CMT : Read CCC certificate... Cert size : 30600 byte(s) CMT : Read HWC certificate... Cert size : 20480 byte(s) CMT : Read VARIANT certificate... Cert size : 0 byte(s) Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\BEST_v1.23\Backup\Cert\356053034517176.rpl Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 0EF001041C097E56F829190A9D7A1D2A37F86CC0 CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration MCU Cfg Ok , 03 FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027 Transmission mode : Dual (Ddr, TX2) Boot Done! ConvertImage: Processing rm495__07.95.image_ei_red ConvertImage: Page Size is 128K, no need convert Transmission mode : Dual (Ddr, TX2) Erase : Processing rm495__07.95.image_ei_red Found 2 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF CMT , NOR , Area : 0x02160000 - 0x03FBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:04:06 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing rm495__07.95.image_ei_red Total writen 696 blocks TIME : Write time : 00:01:32 PrReq : NOR , 00 Init Service mode... Wait... Reading Phone Info.... Connected phone - Nokia 5130c-2 Software Info: V 07.95 03-02-10 RM-495 (c) Nokia IMEI: 356053034517176 Product code: 0571593 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
07-02-2011, 18:46
| #3022 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| registered to: saeedullah_khan Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : CNT : rm495__07.95.image_mena_b_blu Flashing phone now... Check files done... -> SWversion check skipped : Custom mode selected Backup CRT308 data... CRT308 Backup Created SL3 Simlock read ... ok WMDRM read ... ok SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\BEST_v1.23\Backup\Cert\355212038323111_SIM.rp l Getting product info... RAP_BOOT: 0803000302010000 RAP_PUBLIC: 21B001099E2E7F5643D16FB09D7355CC4B2DDA6E CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723 RAP_PAPUBKEY: 0C917F11196FDB7378C18EF7260698CA4489DCA0 Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm495__07.95.image_mena_b_blu ConvertImage: Page Size is 128K, no need convert Loader len: 308032, CHK: 0378 ADL -> Sending loader... Update Server code succesfully sent to phone! TIME : Boot time : 00:00:06 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : ASIC CMT select Ok ===Flashing [CNT]=== Erase : Processing rm495__07.95.image_mena_b_blu Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:05:15 Write : Processing rm495__07.95.image_mena_b_blu Total 528 [528/0/0] blocks to write, writing... TIME : Write time : 00:00:25 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:05:40 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 5130c-2 Software Info: V 07.95 03-02-10 RM-495 (c) Nokia IMEI: 355212038323111 PPM version : V 07.95 03-02-10 RM-495 (c) Nokia MEN Product code: 0572167 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:06:40 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
07-02-2011, 18:46
| #3023 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| Init Service mode... Wait... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Files Set for Flashing : MCU : C5F02102_rm495__07.97.mcusw PPM : 4BB8AA07_rm495__07.97.ppm_mena_a1 CNT : E24393CE_rm495__07.97.image_mena_a1_red Check FlashFiles, Please, wait... -> SWversion check skipped : Dead mode selected Backup enabled, Will read Certificates now... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 05A0010F2EBD7D5697CADA2573D6AA14F14BBAC0 CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration MCU Cfg Ok , 03 FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027 Transmission mode : Dual (Ddr, TX2) Boot Done! CMT : Read NPC certificate... Cert size : 20480 byte(s) IMEI : 355232033912874 CMT : Read CCC certificate... Cert size : 30600 byte(s) CMT : Read HWC certificate... Cert size : 20480 byte(s) CMT : Read VARIANT certificate... Cert size : 0 byte(s) Cert Read done! Init Service mode... Wait... Init Service Mode Failed! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\BEST_v1.23\Backup\Cert\355232033912874_CRT.rp l Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 05A0010F2EBD7D5697CADA2573D6AA14F14BBAC0 CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration MCU Cfg Ok , 03 FLASHID : 89820089 , CMT , NOR CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512 FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1 CMT Algo sent CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027 Transmission mode : Dual (Ddr, TX2) Boot Done! Transmission mode : Dual (Ddr, TX2) Erase : Processing C5F02102_rm495__07.97.mcusw Found 6 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x00000000 - 0x000006BF CMT , NOR , Area : 0x000006C0 - 0x0001FFFF CMT , NOR , Area : 0x00040000 - 0x000BFFFF CMT , NOR , Area : 0x000C0000 - 0x0013FFFF CMT , NOR , Area : 0x00140000 - 0x0137FFFF CMT , NOR , Area : 0x01380000 - 0x0151FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:01:23 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing C5F02102_rm495__07.97.mcusw CMT: Writing Hash CERT [NOLO] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] Total writen 1169 blocks TIME : Write time : 00:02:29 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Erase : Processing 4BB8AA07_rm495__07.97.ppm_mena_a1 Found 1 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01520000 - 0x01DBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:27 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing 4BB8AA07_rm495__07.97.ppm_mena_a1 Total writen 388 blocks TIME : Write time : 00:00:48 PrReq : NOR , 00 ConvertImage: Processing E24393CE_rm495__07.97.image_mena_a1_red ConvertImage: Page Size is 128K, no need convert Transmission mode : Dual (Ddr, TX2) Erase : Processing E24393CE_rm495__07.97.image_mena_a1_red Found 2 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF CMT , NOR , Area : 0x02160000 - 0x03FBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:03:46 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing E24393CE_rm495__07.97.image_mena_a1_red Total writen 656 blocks TIME : Write time : 00:01:22 PrReq : NOR , 00 Init Service mode... Wait... Reading Phone Info.... Connected phone - Nokia 5130c-2 Software Info: V 07.97 13-09-10 RM-495 (c) Nokia IMEI: Product code: 0576443 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
07-02-2011, 18:47
| #3024 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| registered to: saeedullah_khan Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : CNT : rm495__07.95.image_aa_red Flashing phone now... Check files done... -> SWversion check skipped : Custom mode selected Backup CRT308 data... CRT308 Backup Created SL3 Simlock read ... ok WMDRM read ... ok SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\BEST_v1.23\Backup\Cert\358245033356238_SIM.rp l Getting product info... RAP_BOOT: 0803000302010000 RAP_PUBLIC: 12500112EF168C56C501CEE66A74D575880D145F CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723 RAP_PAPUBKEY: 0C917F11196FDB7378C18EF7260698CA4489DCA0 Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm495__07.95.image_aa_red ConvertImage: Page Size is 128K, no need convert Loader len: 308032, CHK: 0378 ADL -> Sending loader... Update Server code succesfully sent to phone! TIME : Boot time : 00:00:06 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : ASIC CMT select Ok ===Flashing [CNT]=== Erase : Processing rm495__07.95.image_aa_red Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:03:47 Write : Processing rm495__07.95.image_aa_red Total 776 [776/0/0] blocks to write, writing... TIME : Write time : 00:01:03 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:04:51 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 5130c-2 Software Info: V 06.65 01-04-09 RM-495 (c) Nokia IMEI: 358245033356238 PPM version : V 06.65 01-04-09 RM-495 (c) Nokia MEN Product code: 0586824 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:05:45 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
07-02-2011, 18:47
| #3025 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| registered to: saeedullah_khan Connect phone on selected interface... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm443__10.12.mcusw PPM : rm443__10.12.ppm_f CNT : rm443__10.12.image_e_matt_black Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006030C192101033000 CPU ID : RAP3Gv3 , Features : No any extended features RAP_PUB: 14500118D7807D56928FA155305AD8BF6A65237A CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:08 Reopening the connection... Waiting for response: 30 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm443__10.12.mcusw Found 8 areas to erase Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x0005FFFF, NOR, CMT Result: 0000 Erasing area 0x00060000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x0015FFFF, NOR, CMT Result: 0000 Erasing area 0x00160000 - 0x0023FFFF, NOR, CMT Result: 0000 Erasing area 0x01740000 - 0x0191FFFF, NOR, CMT Result: 0000 Erasing area 0x00240000 - 0x0173FFFF, NOR, CMT Result: 0000 Erasing area 0x022E0000 - 0x0261FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:51 Write : Processing rm443__10.12.mcusw Total 1597 [1597/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [ISA+DYNSW] TIME : Write time : 00:01:22 MCU Write done ===Flashing [PPM]=== Erase : Processing rm443__10.12.ppm_f Found 1 areas to erase Erasing area 0x01920000 - 0x022DFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:58 Write : Processing rm443__10.12.ppm_f Total 391 [391/0/0] blocks to write, writing... TIME : Write time : 00:00:20 PPM Write done ===Flashing [CNT]=== Erase : Processing rm443__10.12.image_e_matt_black Found 2 areas to erase Erasing area 0x02620000 - 0x029BFFFF, NOR, CMT Result: 0000 Erasing area 0x029C0000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:03:35 Checking content info... Check Image : Content size is 128k, use direct write mode Write : Processing rm443__10.12.image_e_matt_black Total 624 [624/0/0] blocks to write, writing... TIME : Write time : 00:00:33 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:09:42 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 6303 classic Software Info: V 10.12 08-04-10 RM-443 (c) Nokia IMEI: 353199033426415 PPM version : V 10.12 08-04-10 RM-443 (c) Nokia F Product code: 0569445 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 34 certs Data exist, skip certificate repair... AfterFlash operations done... Reconnect, wait... Done! Elapsed: 00:10:29 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Backup Certificates now... Backup CRT308 data... CRT308 Backup Created SL3 Simlock read ... ok WMDRM read ... ok Check communication with phone.... ADL not support backup mode, rpl reading impossible SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\BEST_v1.23\Backup\Cert\353199033426415_SIM.rp l Elapsed: 00:00:01 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
07-03-2011, 11:29
| #3027 (permalink) |
| No Life Poster  Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| registered to: wc2sime Connect phone on selected interface... UFS S/N 00000000boot - Ok Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Reading Phone Info.... SW ver : V 06.20 01-12-10 RH-125 (c) Nokia IMEI : 357000040435819 PPM : V 06.20 01-12-10 RH-125 (c) Nokia IA PCode : 0588620 BPCode : 059F8R0 HWID : 3006 LCDVer : WIN:BOHAIv94 NT39121 IMEI : 357000040435819 Sl Conf : 001-01-00000000000 Sl Prof : 000000000003000-2 Sl Aux : 000B0000 Hw Sig : 3E65011E0E9AC98C Provider : Default Test Operator Lock info: Block 1 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 2 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 3 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 4 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 5 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 6 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 7 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Done! Resetting User Code to default (12345)... Code reset done, now it 12345 Done Resetting User Code to default (12345)... Code reset done, now it 12345 Done Resetting selected items... Check phone mode... Phone in Local mode Seting Test mode... wait... Test mode set Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:12 |
| |
|
07-03-2011, 11:29
| #3028 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| registered to: wc2sime Connect phone on selected interface... Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm243_07.20_prd_core.fpsx PPM : rm243_07.20_prd_vB15_01_apac2.fpsx CNT : rm243_07.20_prd_UDA_Nokia_Noir.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000010000022600010006400C192101021103 CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB EM0 ID: 00000295 EM1 ID: 00000B22 PUBLIC ID: 1130000D7AAE00584F4AC0AD410257266779F1F5 ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: A8C1D6713E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP ... Processing PASUBTOC ... Boot Done! TIME : Boot time : 00:00:30 Reopening the connection... Waiting for response: 30 ADL Server confirm flashmode! Get req info : empty ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm243_07.20_prd_core.fpsx Found 3 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x0087FFFF, NAND, CMT Result: 0000 Erasing area 0x00B80000 - 0x04DFFFFF, NAND, CMT Result: 0000 Partition erase not allowed by loader Partitioning : Ok [5] TIME : Erase time : 00:00:01 Write : Processing rm243_07.20_prd_core.fpsx Total 404 [404/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS*CORE] CMT : Writing Hash CERT [SOS+ROFS] TIME : Write time : 00:00:55 MCU Write done ===Flashing [PPM]=== Erase : Processing rm243_07.20_prd_vB15_01_apac2.fpsx Found 1 areas to erase Erasing area 0x03300000 - 0x04DFFFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing rm243_07.20_prd_vB15_01_apac2.fpsx Total 154 [154/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFX] TIME : Write time : 00:00:25 PPM Write done ===Flashing [CNT]=== Erase : Processing rm243_07.20_prd_UDA_Nokia_Noir.fpsx Found 1 areas to erase Erasing area 0x04E00000 - 0x07B3FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing rm243_07.20_prd_UDA_Nokia_Noir.fpsx Total 1 [1/0/0] blocks to write, writing... TIME : Write time : 00:00:00 CNT Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:01:22 |
| |
|
07-03-2011, 11:30
| #3029 (permalink) |
| No Life Poster Join Date: Oct 2005 Location: QQ id 2593032292
Posts: 530
Member: 189673 Status: Offline Sonork: 100.1592062 Thanks: 354
Thanked 309 Times in 172 Posts
| Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Files Set for Flashing : MCU : rm240__10.00.mcusw PPM : rm240__10.00.ppm_m1 CNT : rm240__10.00_ISM_006.image_1_brown Check FlashFiles, Please, wait... -> SWversion check skipped : Manual mode selected Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101003000 CMT EM0 ID : 00000295 CMT EM1 ID : 00000B22 CMT PUB ID : 14100003DE5A4E50E256A34B76F44B02BB73CCA6 CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration MCU Cfg Ok , 03 FLASHID : 003F0001 , CMT , NOR CMT Flash ID : 003F0001 < SPANSION => 72NS512P FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent CMT PAPUB : A69838E8C5F20150E64E2E6E06DE6E50B26B593F32 Transmission mode : Dual (Ddr, TX2) Boot Done! Transmission mode : Dual (Ddr, TX2) Erase : Processing rm240__10.00.mcusw Found 5 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x00000000 - 0x0001FFFF CMT , NOR , Area : 0x00040000 - 0x000BFFFF CMT , NOR , Area : 0x000C0000 - 0x0013FFFF CMT , NOR , Area : 0x01480000 - 0x015FFFFF CMT , NOR , Area : 0x00140000 - 0x0147FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:54 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing rm240__10.00.mcusw CMT: Writing Hash CERT [NOLO] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] Total writen 1315 blocks TIME : Write time : 00:02:37 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Erase : Processing rm240__10.00.ppm_m1 Found 1 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01600000 - 0x01CBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:15 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing rm240__10.00.ppm_m1 Total writen 332 blocks TIME : Write time : 00:00:40 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Erase : Processing rm240__10.00_ISM_006.image_1_brown Found 2 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01FC0000 - 0x03F9FFFF CMT , NOR , Area : 0x01CC0000 - 0x01FBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:02:02 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing rm240__10.00_ISM_006.image_1_brown Total writen 672 blocks TIME : Write time : 00:01:21 PrReq : NOR , 00 Init Service mode... Wait... Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Checking Camera Configuration... Operating mode is OK, no need change... Primary Camera #1 configuration info not exist Secondary Camera #2 configuration info not exist Done! |
| |
|
07-03-2011, 12:27
| #3030 (permalink) |
| Product Supporter Join Date: Aug 2007 Location: Pakistan " Karachi " Age: 31
Posts: 4,644
Member: 572216 Status: Offline Sonork: 100.1612300 Thanks: 963
Thanked 2,471 Times in 1,094 Posts
| Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Files Set for Flashing : MCU : rm303__10.10.mcusw PPM : rm303__10.10.ppm_m4 CNT : rm303__10.10.image_m4_blue Check FlashFiles, Please, wait... -> SWversion check skipped : Dead mode selected Backup enabled, Will read Certificates now... Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101013000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 21B00116BCCA8C568ACAEA28F4E5AED1598EBFB5 CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration MCU Cfg Ok , 03 FLASHID : 220C00EC , CMT , NOR CMT Flash ID : 220C00EC < SAMSUNG [SEC] => K5G1257ATM FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent PAPUBkeys blank (erased or HW failure) Transmission mode : Dual (Ddr, TX2) Boot Done! CMT : Read NPC certificate... Cert size : 20480 byte(s) IMEI : 358002034149249 CMT : Read CCC certificate... Cert size : 30600 byte(s) CMT : Read HWC certificate... Cert size : 20480 byte(s) CMT : Read VARIANT certificate... Cert size : 0 byte(s) Cert Read done! Init Service mode... Wait... Init Service Mode Failed! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : D:\infinity box\InfinityBox_install_BEST_v1.23\Backup\Cert\358 002034149249_CRT.rpl Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006010C192101013000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 21B00116BCCA8C568ACAEA28F4E5AED1598EBFB5 CMT MODE ID : 00 CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 CMT Loader sent, Boot Ok MCU Configuration MCU Cfg Ok , 03 FLASHID : 220C00EC , CMT , NOR CMT Flash ID : 220C00EC < SAMSUNG [SEC] => K5G1257ATM FLCNT : 00000000000000000000000000000000000000 FLASHID : 0000FFFF , CMT , MMC , EXT CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok Sending ALGO.... Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0 CMT Algo sent PAPUBkeys blank (erased or HW failure) Transmission mode : Dual (Ddr, TX2) Boot Done! Transmission mode : Dual (Ddr, TX2) Erase : Processing rm303__10.10.mcusw Found 6 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x00000000 - 0x000006BF CMT , NOR , Area : 0x000006C0 - 0x0001FFFF CMT , NOR , Area : 0x00040000 - 0x000BFFFF CMT , NOR , Area : 0x000C0000 - 0x0013FFFF CMT , NOR , Area : 0x00140000 - 0x010DFFFF CMT , NOR , Area : 0x010E0000 - 0x0121FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:45 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing rm303__10.10.mcusw CMT: Writing Hash CERT [NOLO] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] Total writen 1098 blocks TIME : Write time : 00:02:24 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Erase : Processing rm303__10.10.ppm_m4 Found 1 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x01220000 - 0x0189FFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:16 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing rm303__10.10.ppm_m4 Total writen 314 blocks TIME : Write time : 00:00:38 PrReq : NOR , 00 ConvertImage: Processing rm303__10.10.image_m4_blue ConvertImage: Page Size is 128K, no need convert Transmission mode : Dual (Ddr, TX2) Erase : Processing rm303__10.10.image_m4_blue Found 2 areas to erase, erase group Asic : CMT , Sub : NOR CMT , NOR , Area : 0x018A0000 - 0x01B1FFFF CMT , NOR , Area : 0x01B20000 - 0x03FBFFFF Using TimeOut : 7 min ( 430 sec ) Erasing, wait..... CMT : Group erase Ok TIME : Erase time : 00:00:44 PrReq : NOR , 00 Transmission mode : Dual (Ddr, TX2) Write : Processing rm303__10.10.image_m4_blue Total writen 512 blocks TIME : Write time : 00:01:02 PrReq : NOR , 00 Init Service mode... Wait... Reading Phone Info.... Connected phone - Software Info: V 10.10 23-03-09 RM-303 (c) Nokia IMEI: 358002034149249 Product code: 0548819 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... FullFactorySet...OK! ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 0 certs Uploading certificates... Writen 21 certs! AfterFlash operations done... Reconnect, wait... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| thread | Thread Starter | Forum | Replies | Last Post |
| New Nokia Software!!!!!!! | Jefferson | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 73 | 05-15-2013 13:07 |
| Need software upgrade for Nokia 5110 | ptkrf | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 26 | 09-25-2012 02:41 |
| Sim card sleep mode problem with 6130 | ratzfatz | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 4 | 05-22-2012 11:13 |
| Help with 6110 | paulomt1 | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 3 | 05-25-2009 16:29 |
| Netmonitor with FBus???? | ratzfatz | Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) | 4 | 06-09-1999 17:04 |
Linear Mode
