RM-972 how to remove user code - GSM-Forum

daroas · 04-01-2015, 20:58

Hello. I have here one Nokia RM-972 for remove user code.. Hor to make with BEST?

Dzirt · 04-01-2015, 21:03

Hello. Simple Flash with need version. IF data inside mandatory - read it first by FlashRead with correct settings (XG221).

daroas · 04-01-2015, 21:07

How to Conect RM-972 in BEST Software? USB Cable?

Dzirt · 04-01-2015, 21:44

Sure USB. Way completely same, as for others BB5/XG618/XG213 phones.

daroas · 04-06-2015, 12:59

rm-972 not connect for USB for Flashing

Dzirt · 04-06-2015, 13:03

So sad then... Hope, you will find the problem.

daroas · 04-09-2015, 03:05

The device was recognized but could not find the USB drive , you can help me?

Dzirt · 04-09-2015, 05:24

Drivers on support and they working. And I not see anything, about can help.

daroas · 04-09-2015, 18:05

At Last,i`m install the WinUsbInstaller_NXP_x86 and the device install drive ok. Problem is Solved!

Quote:

Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len : 0x16
IF xCPUID : XGOLD 221 [XMM2210 QIMING]
IF uCHIPID : 19421909A289E9C8
IF Resp Data : 194200021C030101

Wait for user action : Insert battery

Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : 1_1336.500_MKEYSKEY
QIMING EEP config Ok
FLASHID : 52F00000 , [ NOR ]
Boot conf set, Target Ready
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 359950059977788
IMEI 2 : 359950059977796
Phone Product Code : 059T574

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\359950059977788_XG 221_CRT.rpl

===Flashing [MCU]===
Processing file : rm972_14.0.6.mcusw.fls
Region count : 2
00 : [ PSI ] : rm972_14.0.6.mcusw.fls.fls
01 : [ Code ] : rm972_14.0.6.mcusw.fls.fls
Parse done , flashing now

Flash : 00 : rm972_14.0.6.mcusw.fls.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x40000000 , Len : 0x00020000
Erase done
Region Start : 0x40000000 , Data Len : 0x00020000
Region Load done
Wait for phone write all data ...
Write done
rm972_14.0.6.mcusw.fls.fls image flash done

Flash : 01 : rm972_14.0.6.mcusw.fls.fls
Sending Sec-Pack
SecInfo Area : 0x0001 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x40040000 , Len : 0x00020000
Erase done
Erase area 0x01 , Start 0x40060000 , Len : 0x00160000
Erase done
Erase area 0x02 , Start 0x40340000 , Len : 0x02540000
Erase done
Erase area 0x03 , Start 0x47E00000 , Len : 0x00040000
Erase done
Region Start : 0x40040000 , Data Len : 0x00020000
Region Load done
Wait for phone write all data ...
Write done
Region Start : 0x40060000 , Data Len : 0x00160000
Region Load done
Wait for phone write all data ...
Write done
Region Start : 0x40340000 , Data Len : 0x020773D0
Region Load done
Wait for phone write all data ...
Write done
rm972_14.0.6.mcusw.fls.fls image flash done

===Flashing [PPM]===
Processing file : rm972_14.0.6_059T574_a1.rofs.fls
Region count : 1
00 : [ Cust ] : rofs_ebl_psi.fls
Parse done , flashing now

Flash : 00 : rofs_ebl_psi.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x42880000 , Len : 0x00F80000
Erase done
Region Start : 0x42880000 , Data Len : 0x0052CA98
Region Load done
Wait for phone write all data ...
Write done
rofs_ebl_psi.fls image flash done

===Flashing [CNT]===
Processing file : rm972_14.0.6_059T574_a1.image.fls
Region count : 1
00 : [ Cust ] : rm972_14.0.6_059T574_a1.image.fls.image.fls
Parse done , flashing now

Flash : 00 : rm972_14.0.6_059T574_a1.image.fls.image.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x43800000 , Len : 0x04600000
Erase done
Erase area 0x01 , Start 0x47E40000 , Len : 0x000E0000
Erase done
Region Start : 0x43800000 , Data Len : 0x026C0000
Region Load done
Wait for phone write all data ...
Write done
rm972_14.0.6_059T574_a1.image.fls.image.fls image flash done

Flashing done!
Total flash time : 00:02:10
Reboot phone now...

04-01-2015, 20:58	#1 (permalink)
daroas No Life Poster Join Date: Oct 2005 Location: Ubá--Brazil Age: 34 Posts: 916 Member: 194078 Status: Offline Sonork: no have Thanks Meter: 209	RM-972 how to remove user code Hello. I have here one Nokia RM-972 for remove user code.. Hor to make with BEST?

04-01-2015, 21:03	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Hello. Simple Flash with need version. IF data inside mandatory - read it first by FlashRead with correct settings (XG221).

04-01-2015, 21:07	#3 (permalink)
daroas No Life Poster Join Date: Oct 2005 Location: Ubá--Brazil Age: 34 Posts: 916 Member: 194078 Status: Offline Sonork: no have Thanks Meter: 209	How to Conect RM-972 in BEST Software? USB Cable?

04-01-2015, 21:44	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Sure USB. Way completely same, as for others BB5/XG618/XG213 phones.

04-06-2015, 12:59	#5 (permalink)
daroas No Life Poster Join Date: Oct 2005 Location: Ubá--Brazil Age: 34 Posts: 916 Member: 194078 Status: Offline Sonork: no have Thanks Meter: 209	rm-972 not connect for USB for Flashing

04-06-2015, 13:03	#6 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	So sad then... Hope, you will find the problem.

04-09-2015, 03:05	#7 (permalink)
daroas No Life Poster Join Date: Oct 2005 Location: Ubá--Brazil Age: 34 Posts: 916 Member: 194078 Status: Offline Sonork: no have Thanks Meter: 209	The device was recognized but could not find the USB drive , you can help me?

04-09-2015, 05:24	#8 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Drivers on support and they working. And I not see anything, about can help.