GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 03-19-2017, 17:05   #31 (permalink)
Insane Poster
 
Join Date: Mar 2017
Location: GSMFORUM
Posts: 96
Member: 2695040
Status: Offline
Thanks Meter: 94
Nokia 130 Hang On Logo Done



Nokia 130 Hang On Logo Done




  Reply With Quote
The Following User Says Thank You to TATAISONA For This Useful Post:
Old 03-20-2017, 13:07   #32 (permalink)
No Life Poster
 
Nasir Mobiles's Avatar
 
Join Date: Sep 2006
Location: ---> Hope
Posts: 2,009
Member: 355782
Status: Offline
Thanks Meter: 1,238
Nokia 215 (RM-1110) Write Firmware.

Code:
Core : v2.24 , MTKx FlashEngine : v10.2

Verify files ... 
MAUI : RM-1110_ROM_eMP_12.03.11
VIVA : RM-1110_VIVA_eMP_12.03.11
LANG : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
CUST : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
JMPT : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 256 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 831C611D521A43A07132AF1717EB0DE9
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : JET.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Jet.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
SecureDecrypt : RM-1110_ROM_eMP_12.03.11
SecureDecrypt : RM-1110_VIVA_eMP_12.03.11
SecureDecrypt : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
SecureDecrypt : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
SecureDecrypt : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
OVRLP : 000069B900000001
PHPID : JET.10.01.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1110_ROM_eMP_12.03.11
Write : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
Write : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
Write : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
Write : RM-1110_VIVA_eMP_12.03.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1110_ROM_eMP_12.03.11
[VERIFY] DONE : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_VIVA_eMP_12.03.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:50
Reboot phone Ok
  Reply With Quote
The Following User Says Thank You to Nasir Mobiles For This Useful Post:
Old 03-22-2017, 17:46   #33 (permalink)
No Life Poster
 
UzUnlocker's Avatar
 
Join Date: Apr 2013
Location: Uzbekistan / Bukhara
Posts: 567
Member: 1912005
Status: Offline
Sonork: 100.1658592
Thanks Meter: 383
Lumia 640 DS RM-1077 Boot repair done via Infinity BEST Tool - World 1ST Tool

Repair boot via USB
Code:
Core : v2.26 , WP10x FlashEngine : v3.0

FFU : RM1077_02177.00000.15184.36002_RETAIL_prod_signed_1017_025FF3_000-RU_MV.ffu
Checking FFU file, wait...
FFU Revision ID   : 2.0
FFU Model ID      : Nokia.MSM8226.P6204
FFU RootKeyHash   : 0000000000000000000000000000000000000000
FFU Languages     : Portuguese(Brazil) , Russian , Greek , fr-ca , Indonesian , Korean , Polish , bn-bd , Uzbekistan(Latin) , Catalan , Swedish , Bulgarian , Japanese , Spanish , English (UK) , Czech , Latvian , Slovak , Chinese , sr-latn-rs , Vietnamese , af-za , Hindi (India) , gl-es , Turkish , Thai , Italian , Danish (Denmark) , ha-latn-ng , Slovenian , Malay (Malaysia) , Lithuanian , Persian (Iran) , Kazakh , Romanian , English , eu-es , Estonian , Filipino (Philippines) , Belorusian , Norwegian (Bokmal , Norway) , Finnish , lo-la , km-kh , Arabic , Ukrainian , Croatian , Portuguese(Portugal) , Chinese(Taiwan) , Macedonian , Hungarian , Spanish(Mexico) , Azerbaijan(Latin) , German , Albanian , Dutch (Netherlands) , French , sw-ke , Hwbre (Israel) , 
FFU ChipSectors   : 15155200
FFU Header        : 0x000E0000
FFU Payload       : 0x70060000
FFU FastVerify    : Ok

Waiting for phone...
Boot Repair mode is selected
1. Charge battery fully , insert in phone
2. Insert USB cable
3. If phone stuck in boot mode or shows Blue Screen - follow repair manual

Handshake Ok
Init[0] : 0x01000000
Init[1] : 0x30000000
Sending Loader ... 
Init Loader ... 
FW_REV : 000.001.000
MSM_ID : 008000E100000000
MSM_RK : 831BE6B18E7006372069545885A80F786C33D064
Sending and verify Signature
eMMC init Ok
[eMMC_VEN] : 0x0011
[eMMC_OEM] : 0x0000
[eMMC_REV] : 0x0000
[eMMC_CAP] : 0x00000001D2000000
Sending HashTable
Sending configuration data
Program [SBL1]
Program [RPM]
Program [TZ]
Program [UEFI]
Program [WINSECAPP]
Program [TZAPPS]
Program [DBI]
Clear [DDR]
Clear [PLAT]
Clear [EFIESP]
Program [8626_GPT_V1_0.BIN]
Rebooting ...
Reboot to UEFI now...
Repair done, verify now ... 
Wait for device in UEFI ... 
Device boot not done
Check Drivers, battery charge
Try again in Dead mode

Phone disconected!

After i just charge battery & flash FFU file ))
Code:
Core : v2.26 , WP10x FlashEngine : v3.0

FFU : RM1077_02177.00000.15184.36002_RETAIL_prod_signed_1017_025FF3_000-RU_MV.ffu
Checking FFU file, wait...
FFU Revision ID   : 2.0
FFU Model ID      : Nokia.MSM8226.P6204
FFU RootKeyHash   : 0000000000000000000000000000000000000000
FFU Languages     : Portuguese(Brazil) , Russian , Greek , fr-ca , Indonesian , Korean , Polish , bn-bd , Uzbekistan(Latin) , Catalan , Swedish , Bulgarian , Japanese , Spanish , English (UK) , Czech , Latvian , Slovak , Chinese , sr-latn-rs , Vietnamese , af-za , Hindi (India) , gl-es , Turkish , Thai , Italian , Danish (Denmark) , ha-latn-ng , Slovenian , Malay (Malaysia) , Lithuanian , Persian (Iran) , Kazakh , Romanian , English , eu-es , Estonian , Filipino (Philippines) , Belorusian , Norwegian (Bokmal , Norway) , Finnish , lo-la , km-kh , Arabic , Ukrainian , Croatian , Portuguese(Portugal) , Chinese(Taiwan) , Macedonian , Hungarian , Spanish(Mexico) , Azerbaijan(Latin) , German , Albanian , Dutch (Netherlands) , French , sw-ke , Hwbre (Israel) , 
FFU ChipSectors   : 15155200
FFU Header        : 0x000E0000
FFU Payload       : 0x70060000
FFU FastVerify    : Ok

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Collect Info...
=== Nokia Flash App info :
Protocol Version        : 2.37
Protocol Implementation : 2.60
=== Phone Initial info :
Phone Model ID : Nokia.MSM8226.P6204.2.0
=== eMMC info :
eMMC Vendor : Toshiba
eMMC CID : 0011
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status   : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey    : 831BE6B18E7006372069545885A80F786C33D064
=== Other info :
SD present        : False

Full Check skipped , will be checked by ImageSignature


Battery Level : 1%
[Info] : Battery level is low, but ignored in settings. Continue at user risk.
RPMB Provision Status Code : 0x0101
Device RAM size : 1024 MiB
Device have ATRP (AntiTheft) system!
Backup to RAM Ok!

FFU : RM1077_02177.00000.15184.36002_RETAIL_prod_signed_1017_025FF3_000-RU_MV.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted :)
Perform Data Partition Erase
Error : 06 : Data Partition Not Found! Seems as damaged
Will Fix partitions by flash whole image
Sending FFU Header CertData
Header sent , accepted :)
Skip Data Partition Erase
Sending FFU Payload Data... 
Finishing flashing

Flashing done!
Green Light :)

Image Sent, processing PostFlash
FinalConfig : abnormal status, error code : 0xFF7B0000
Make Factory Set : Ok
Restore RAMBkp : Ok
Update NVI from Image
Ok , NVI will be updated on first boot!
PostFlash Finished

Total flash time : 00:05:24

Rebooting

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected



See Result

  Reply With Quote
The Following 11 Users Say Thank You to UzUnlocker For This Useful Post:
Show/Hide list of the thanked
Old 03-23-2017, 01:25   #34 (permalink)
No Life Poster
 
Shensohau's Avatar
 
Join Date: Aug 2010
Age: 32
Posts: 4,334
Member: 1377783
Status: Offline
Sonork: 100.1611724
Thanks Meter: 2,706
Donate money to this user
Nokia Lumia 640 DS AT&T Full Flash Done W1st





Code:
Card found: S/N : XXXXXXX , v0135
Registered to: Shensohau

Connect phone on selected interface...

Core : v2.26 , WP10x FlashEngine : v3.0

FFU : RM1073_02177.00000.15184.36016_RETAIL_prod_signed_1004_022B79_ATT-US.ffu
Checking FFU file, wait...
FFU Revision ID   : 2.0
FFU Model ID      : Nokia.MSM8926.P6204_ATT
FFU RootKeyHash   : 0000000000000000000000000000000000000000
FFU Languages     : Portuguese(Brazil) , Russian , Greek , fr-ca , Indonesian , Korean , Polish , bn-bd , Uzbekistan(Latin) , Catalan , Swedish , Bulgarian , Japanese , Spanish , English (UK) , Czech , Latvian , Slovak , Chinese , sr-latn-rs , Vietnamese , af-za , Hindi (India) , gl-es , Turkish , Thai , Italian , Danish (Denmark) , ha-latn-ng , Slovenian , Malay (Malaysia) , Lithuanian , Persian (Iran) , Kazakh , Romanian , English , eu-es , Estonian , Filipino (Philippines) , Belorusian , Norwegian (Bokmal , Norway) , Finnish , lo-la , km-kh , Arabic , Ukrainian , Croatian , Portuguese(Portugal) , Chinese(Taiwan) , Macedonian , Hungarian , Spanish(Mexico) , Azerbaijan(Latin) , German , Albanian , Dutch (Netherlands) , French , sw-ke , Hwbre (Israel) , 
FFU ChipSectors   : 15155200
FFU Header        : 0x000E0000
FFU Payload       : 0x6F680000
FFU FastVerify    : Ok

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version        : 2.37
Protocol Implementation : 2.60
=== Phone Initial info :
Phone RMxxx ID : RM-1073
Phone Model ID : Nokia.MSM8926.P6204_ATT.1.1
Phone Model PC : 059X0B8
Phone IMEI     : 35781606XXXXXXX
=== eMMC info :
eMMC Vendor : Hynix
eMMC CID : 0090
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status   : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey    : 831BE6B18E7006372069545885A80F786C33D064
=== Other info :
SD present        : False

Full Check skipped , will be checked by ImageSignature


Battery Level : 31%
RPMB Provision Status Code : 0x0101
Device RAM size : 1024 MiB
Device have ATRP (AntiTheft) system!
Backup to RAM Ok!

FFU : RM1073_02177.00000.15184.36016_RETAIL_prod_signed_1004_022B79_ATT-US.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted :)
Perform Data Partition Erase
Erase done
Sending FFU Payload Data... 
Finishing flashing

Flashing done!
Green Light :)

Image Sent, processing PostFlash
FinalConfig : abnormal status, error code : 0xFF7B0000
Make Factory Set : Ok
Restore RAMBkp : Ok
PostFlash Finished

Total flash time : 00:05:52
Thanks Infinity-Team
Thanks YellowBoss
  Reply With Quote
The Following 2 Users Say Thank You to Shensohau For This Useful Post:
Old 03-27-2017, 10:17   #35 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,898
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 582
Nokia 216 RM-1187 User code reset done no data loss

Nokia 216 RM-1187 User code reset done no data loss

Quote:
Reading Phone Info....
Software ver : 11.00.11 00-00-00 RM-1187
IMEI 1 : 354884089433865
IMEI 2 : 354884089433873
XappVer : 000008D4
Ape Ver : NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul 1 02:50:44 2013 U 69b804d5
PPM : IJ
CNT : SUEZ.11.00.11.p1
Product SN : FBD4CB2AU
Product code : 059X807
Base Prd.code: 059X9H2
Module code : 0207175
Hardware info=======
HWID : 1101
LCDVer: TPO
Lock info ===========
IMEI : 354884089433865
IMEI spNet : 3A 45 88 04 98 34 83 56

Conf key : 800000000004000B
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

SimLock status : Ok
Security status : Ok

Done!
Quote:
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 220 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C9E9961D1EDB0300937E3BD9552C2390
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 03-27-2017, 13:45   #36 (permalink)
Freak Poster
 
amurale72's Avatar
 
Join Date: Dec 2012
Location: chinnasalem tamilnadu india
Posts: 237
Member: 1849338
Status: Offline
Sonork: 100.1646373
Thanks Meter: 89
Nokia x rm-980 flash suceessfully

Card found: S/N : 90AD9967 , v0122
Registered to: MURALI

Connect phone on selected interface...

Core : v2.26 , NXP FlashEngine : v5.3

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : RM980_1.2.4.3_059T985_IMEA_IN_variant.img
Ok, Set : RM980_1.2.4.3_boot.img
Ok, Set : RM980_1.2.4.3_cache.img
Ok, Set : RM980_1.2.4.3_emmc_appsboot.mbn
Ok, Set : RM980_1.2.4.3_emmc_appsboothd.mbn
Ok, Set : RM980_1.2.4.3_fat.bin
Ok, Set : RM980_1.2.4.3_oemsbl.mbn
Ok, Set : RM980_1.2.4.3_oemsblhd.mbn
Ok, Set : RM980_1.2.4.3_persist.img
Ok, Set : RM980_1.2.4.3_preload.img
Ok, Set : RM980_1.2.4.3_qcsbl.mbn
Ok, Set : RM980_1.2.4.3_qcsblhd_cfgdata.mbn
Ok, Set : RM980_1.2.4.3_recovery.img
Ok, Set : RM980_1.2.4.3_system.img
Ok, Set : RM980_1.2.4.3_udisk.bin
Ok, Set : RM980_1.2.4.3_userdata.img

File HW revision is : HW Revision V1

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected


Connect Ok

Get Phone Initial Info
Product : MSM7627A
Version : 0.5
Serial : 4DCD647

Processing : RM980_1.2.4.3_qcsblhd_cfgdata.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_qcsbl.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_oemsblhd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_oemsbl.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM980_1.2.4.3_emmc_appsboothd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_emmc_appsboot.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM980_1.2.4.3_boot.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_recovery.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_persist.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_fat.bin
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_system.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_cache.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_userdata.img
Erase Partition : USERDATA
Partition Erase Done
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_udisk.bin
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_preload.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.2.4.3_059T985_IMEA_IN_variant.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Rebooting phone now

Flashing done!
Total flash time : 00:05:09
Reboot phone Ok

Connect phone on selected interface...

Phone found!
Nokia X Platform Phone detected (ADB)
Read info... Ok
  Reply With Quote
The Following User Says Thank You to amurale72 For This Useful Post:
Old 03-28-2017, 14:54   #37 (permalink)
Freak Poster
 
Join Date: Nov 2015
Location: Istanbul
Age: 23
Posts: 188
Member: 2483507
Status: Offline
Thanks Meter: 80
Nokia XL RM-1030 Flashing done by BEST

Code:
Core : v2.26 , NXP FlashEngine : v5.3

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : RM1030_1.2.3.1_059V935_IMEA_BD_variant.img
Ok, Set : RM1030_1.2.3.1_boot.img
Ok, Set : RM1030_1.2.3.1_cache.img
Ok, Set : RM1030_1.2.3.1_emmc_appsboot.mbn
Ok, Set : RM1030_1.2.3.1_emmc_appsboothd.mbn
Ok, Set : RM1030_1.2.3.1_fat.bin
Ok, Set : RM1030_1.2.3.1_oemsbl.mbn
Ok, Set : RM1030_1.2.3.1_oemsblhd.mbn
Ok, Set : RM1030_1.2.3.1_persist.img
Ok, Set : RM1030_1.2.3.1_preload.img
Ok, Set : RM1030_1.2.3.1_qcsbl.mbn
Ok, Set : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn
Ok, Set : RM1030_1.2.3.1_recovery.img
Ok, Set : RM1030_1.2.3.1_system.img
Ok, Set : RM1030_1.2.3.1_udisk.bin
Ok, Set : RM1030_1.2.3.1_userdata.img

File HW revision is : HW Revision V1

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected


Connect Ok

Get Phone Initial Info
Product : MSM7627A
Version : 0.5
Serial  : 41DB698

Processing : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_qcsbl.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_oemsblhd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_oemsbl.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM1030_1.2.3.1_emmc_appsboothd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_emmc_appsboot.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM1030_1.2.3.1_boot.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_recovery.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_persist.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_fat.bin
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_system.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_cache.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_userdata.img
Erase Partition : USERDATA
Partition Erase Done
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_udisk.bin
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_preload.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_1.2.3.1_059V935_IMEA_BD_variant.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Rebooting phone now

Flashing done!
Total flash time : 00:05:42
Reboot phone Ok
  Reply With Quote
The Following User Says Thank You to sany5491 For This Useful Post:
Old 03-28-2017, 14:57   #38 (permalink)
Freak Poster
 
Join Date: Nov 2015
Location: Istanbul
Age: 23
Posts: 188
Member: 2483507
Status: Offline
Thanks Meter: 80
Nokia 220 hnag on Logo done by formate
Code:
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 22 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : FBE5143BEF1BAF5BAE79D477EB9AB76B
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000

Executing FFS FORMAT now...
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Elapsed: 00:01:43
Connect phone on selected interface...
  Reply With Quote
The Following User Says Thank You to sany5491 For This Useful Post:
Old 03-28-2017, 15:16   #39 (permalink)
Freak Poster
 
Join Date: Nov 2015
Location: Istanbul
Age: 23
Posts: 188
Member: 2483507
Status: Offline
Thanks Meter: 80
RM-917 (LUMIA 521) Flash done by BEST.

Code:
Core : v2.26 , WP10x FlashEngine : v3.0

FFU : RM917_1030.6409.1311.0001_RETAIL_nam_usa_216_01_170918_prd_signed.ffu
Checking FFU file, wait...
FFU Revision ID   : 2.0
FFU Model ID      : Nokia.MSM8227.P6037
FFU RootKeyHash   : 9DF6E11153C33AA85F7984C21EFA43AEDF9B82BE
FFU Languages     : Albanian , Arabic , Azerbaijan(Latin) , Belorusian , Bulgarian , Catalan , Croatian , Czech , Danish (Denmark) , Dutch (Netherlands) , English (UK) , English , Estonian , Filipino (Philippines) , Finnish , French , German , Greek , Hwbre (Israel) , Hindi (India) , Hungarian , Indonesian , Italian , Japanese , Kazakh , Korean , Latvian , Lithuanian , Macedonian , Malay (Malaysia) , Norwegian (Bokmal , Norway) , Persian (Iran) , Polish , Portuguese(Brazil) , Portuguese(Portugal) , Romanian , Russian , Serbian (Latin) , Chinese , Slovak , Slovenian , Spanish(Mexico) , Spanish , Swedish , Thai , Chinese(Taiwan) , Turkish , Ukrainian , Uzbekistan(Latin) , Vietnamese , 
FFU ChipSectors   : 7557120
FFU Header        : 0x000C0000
FFU Payload       : 0x4D020000
FFU FastVerify    : Ok

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version        : 1.15
Protocol Implementation : 1.28
=== Phone Initial info :
Phone RMxxx ID : RM-917
Phone Model ID : Nokia.MSM8227.P6037.1.2
Phone Model PC : 059S0B4
Phone IMEI     : 355913058553657
=== eMMC info :
eMMC Vendor : Hynix
eMMC CID : 0090
eMMC Size : 7400 MiB
=== Security Initial info :
Security Status   : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey    : 9DF6E11153C33AA85F7984C21EFA43AEDF9B82BE
=== Other info :
SD present        : True , 00983A00

Full Check skipped , will be checked by ImageSignature


Battery Level : 76%
RPMB Provision Status Code : 0x0101
Device RAM size : 512 MiB
Device not have ATRP
Backup to RAM Ok!

FFU : RM917_1030.6409.1311.0001_RETAIL_nam_usa_216_01_170918_prd_signed.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted :)
Perform Data Partition Erase
Erase done
Sending FFU Payload Data... 
Finishing flashing

Flashing done!
Green Light :)

Image Sent, processing PostFlash
FinalConfig : abnormal status, error code : 0xFFFF0000
Make Factory Set : Ok
Restore RAMBkp : Ok
PostFlash Finished

Total flash time : 00:02:48

Rebooting

Connect phone on selected interface...
  Reply With Quote
The Following User Says Thank You to sany5491 For This Useful Post:
Old 03-30-2017, 06:49   #40 (permalink)
Freak Poster
 
gsmjiya's Avatar
 
Join Date: Aug 2008
Location: china/india/kolkata
Age: 32
Posts: 383
Member: 845623
Status: Offline
Sonork: 100.1606036
Thanks Meter: 125
lumia 640 lte rm-1073 unlock done by best dongel

[WP8x] : Init TesMode
[TSTM] : Use File : RM1073_2179.0000.9651.15153.207.760_enosw-wim-signed_858223.secwim
=== Base Phone Info
Sw Version : 02166.00000.15103.45022
IMEI : 3578********
ProductCode : 059X0B6
Device catched in BOOT mode!
Collect Info...
=== Nokia Flash App info :
Protocol Version : 2.37
Protocol Implementation : 2.60
=== Phone Initial info :
Phone Model ID : Nokia.MSM8926.P6204.1.1
=== eMMC info :
eMMC Vendor : Samsung
eMMC CID : 0015
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : 831BE6B18E7006372069545885A80F786C33D064
=== Other info :
SD present : False

SECWIM : RM1073_2179.0000.9651.15153.207.760_enosw-wim-signed_858223.secwim
Sending WIM ...

WIM Image sent! Trying init TestMode now...

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

=== Main info ===
SecLabel Version : Security LabelSW (wim) 20.2169.385.194
Sw Version : RM1073 2179.0000.9651.15153 858223 2015/08/03 //romulus_engine/asset_integration_RG2\r\n
IMEI : 3578*********
ProductCode : 059X0B6
ProductSN : DFD4B00AU
Module Code : 0206634
=== HW info ===
Public ID : 9ADD16358BDF7CA842B7232941A3A50031AF1126
BT Addr. : 300D4355F7BD
Wlan Mac : 300D438F9D40
=== Branding and security info ===
Sec. Mode : Restricted

Conf key : 8000000000000000
Provider key : 3101500112987633
Country : United States of America
Operator : AT&T
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 3

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
BLK : 2
Lock1:Close
BLK : 3
Lock1:Close
=============================
LOCKS : Closed
=============================

Making RPL backup...
NPC : Read Ok , [520]
IMEI : 3578*******
CCC : Certificate not available
HWC : Certificate not available
RDC : Certificate not available

NPC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\3578*******_CRT_2n d.rpl

Done!

WP8 Unlock Started
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version is valid
Processing Step #1
Processing Step #2
Processing Step #3
Processing Step #4
Disconnected
Need SDAuth to finish ...
Started
Connecting to SX4 server...
Connected
SX4 enter ..
SDAuth Ok!
SX4 Disconnected
Unlock Done!
Wait for phone reboot ...
Reboot Ok!

Phone disconected!

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

=== Main info ===
NCSD Version : 5.0
Sw Version : 02166.00000.15103.45022
IMEI : 35***********
ProductCode : 059X0B6
ProductCodeB : 059W8Z1
ProductSN : DFD4B00AU
Module Code : 0206634
=== HW info ===
Public ID : 9ADD16358BDF7CA842B7232941A3A50031AF1126
HW Version : 2140
BT Addr. : 300D4355F7BD
Wlan Mac : 300D438F9D40
Battery Level : 24 %
=== Branding and security info ===
Operator : AIO-US
SimLock : Unlocked
SimLock : 2440700000000
Country : Finland
Operator : NOKIA (Open)
Branding : RM-1073_1002
Sec. Mode : Restricted
Done!
thanks infinity best .............
  Reply With Quote
The Following 2 Users Say Thank You to gsmjiya For This Useful Post:
Old 04-05-2017, 13:02   #41 (permalink)
Product Supporter
 
Join Date: May 2013
Posts: 2,130
Member: 1948608
Status: Offline
Thanks Meter: 1,572
Thumbs up Lumia 625 Unlock Done.

Nokia lumia 625 Direct unlock.






Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

WP8 Unlock Started
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version is valid
Processing Step #1
Processing Step #2
Processing Step #3
Processing Step #4
Disconnected
Need SDAuth to finish ...
Started
Connecting to SX4 server...
Connected
SX4 enter ..
SDAuth Ok!
SX4 Disconnected
Unlock Done!
Wait for phone reboot ...
Reboot Ok!

Phone disconected!

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

  Reply With Quote
The Following 2 Users Say Thank You to -Mosin- For This Useful Post:
Old 04-19-2017, 06:53   #42 (permalink)
No Life Poster
 
4G Telecom's Avatar
 
Join Date: Jul 2015
Location: India
Posts: 510
Member: 2421242
Status: Offline
Sonork: 100.1614558
Thanks Meter: 671
Donate money to this user
Nokia dct 4 (2760) Unlock Done

Read Info..............
Code:
Reading Phone Info....
SW ver  : V 05.61 18-04-08 RM-258 (c) Nokia
IMEI    :      356XXXXXXXXXXXX
PPM     :      V 05.61
18-04-08
RM-258
(c) Nokia
AG
CNT     :      Content: ag_yoigo_es_red
V 05.61
18-04-08
RM-258
(c) Nokia


DSP Ver :      6w45.v48
PCode   :      0572417
BPCode  :      0515047
HWID    :      5000
LCDVer  :      SUEZ
IMEI    :      356XXXXXXXXXXXX
Sl Conf  : 214-04-00086388183
Sl Prof  : 800000000001000-B
Sl Aux   : 000B5555
Hw Sig   : 293514D1D57EACEE
Country      : Spain
Operator     : Yoigo

Lock info:
Block 1
L1:Close;  

Done!
Unlocking..........
Code:
Write SL RPL procedure procedure started...
Read Lock Info
Locked to Unknown providers
Unlocking...
All done !
After Unlock Read Info..........
Code:
Reading Phone Info....
SW ver  : V 05.61 18-04-08 RM-258 (c) Nokia
IMEI    :      356802026021393
PPM     :      V 05.61
18-04-08
RM-258
(c) Nokia
AG
CNT     :      Content: ag_yoigo_es_red
V 05.61
18-04-08
RM-258
(c) Nokia


DSP Ver :      6w45.v48
PCode   :      0572417
BPCode  :      0515047
HWID    :      5000
LCDVer  :      SUEZ
IMEI    :      356XXXXXXXXXXXX
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000001000-B
Sl Aux   : 000B5555
Hw Sig   : 293514D1D57EACEE
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Done!
  Reply With Quote
The Following 2 Users Say Thank You to 4G Telecom For This Useful Post:
Old 04-23-2017, 19:36   #43 (permalink)
No Life Poster
 
profkefah's Avatar
 
Join Date: Mar 2015
Location: Islamic world
Age: 31
Posts: 4,305
Member: 2371500
Status: Offline
Thanks Meter: 2,231
Nokia 150 rm1190 screen lock reset done

Nokia 150 rm1190 screen lock reset done


Quote:
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 141 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : C298A57EA7F89DCBF4D96C91FCE3F54D
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...
  Reply With Quote
The Following User Says Thank You to profkefah For This Useful Post:
Old 04-26-2017, 09:38   #44 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,898
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 582
Nokia 210

Code:
Core : v2.28 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm924__06.09.mcusw
PPM : rm924__06.09.ppm_ma3
CNT : rm924__06.09.image_ma3_059R775
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.56_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 357897058842905
IMEI 2 : 357897058842913
PCcode : 059R776

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\357897058842905_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm924__06.09.mcusw
Image : rm924__06.09.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:02 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01A40000
Erasing, wait ... 
Erase done, time : 00:00:54 
Write , Start : 0x40280000 , Len : 0x01A40000
Flashing , wait ...
Region flash done, time : 00:00:38
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
[Minor Error] : CRC returned by phone is wrong!
[CHK] : 0100E361

   ===Flashing [PPM]===
File : rm924__06.09.ppm_ma3
Image : package_ma3.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41CC0000 , Len : 0x00640000
Erasing, wait ... 
Erase done, time : 00:00:08 
Write , Start : 0x41CC0000 , Len : 0x003EFB64
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0x44C0

   ===Flashing [CNT]===
File : rm924__06.09.image_ma3_059R775
Image : package_ma3_059R775.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42300000 , Len : 0x01B20000
Erasing, wait ... 
Erase done, time : 00:01:05 
Write , Start : 0x42300000 , Len : 0x00C60000
Flashing , wait ...
Region flash done, time : 00:00:16
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:02 
No write data, skip
CRC check passed , 0x98EC

Flashing done!
Total flash time : 00:03:14
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 210
Software Info:     V 06.09 14-10-13 RM-924 (c) Nokia            
IMEI:  357897058842905
PPM version :   V 06.09 14-10-13 RM-924 (c) Nokia             MA3
Product code:  059R776
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:22
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 04-26-2017, 10:16   #45 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,917
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,971
Nokia X2-01 Read User Code Done :)

Code:
Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000000000000022000509200C0000
CPU ID :       BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
EM0 ID:        00005361
PUBLIC ID:     0000000000B4358CA7CC9A46172887BECC08807B
ASIC MODE ID:  00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID:        DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg  ,  Rev : 2.1  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg  ,  Rev : 2.1  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 37955B6FC432998EF0DB240E332228384D19ED09
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 357915040391516
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Wait, reconneting...

SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
CMLA Key read ... Ok
WMDRM read ... Ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
CMLA_KEY Data saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\357915040391516.rpl

All done, Disconnecting

Elapsed: 00:00:49
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    X2-01
Software ver : V 07.11 22-12-10 RM-709 (c) Nokia            
IMEI    :      357915040391516
XappVer :      000008E8
PPM     :      V 07.11 22-12-10 RM-709 (c) Nokia             MC
CNT     :      Content: mc_059C351 V 07.11 22-12-10 RM-709 (c) Nokia            
Product SN   :     1F1495CAH
Product code :     059C351
Base Prd.code:     059B859
Module code  :     0204674
Long Prod.SN :     0
Hardware info=======
HWID  : 1001
Battery: 3742 mV
CMT BT: 2.31-SP2.31
LCDVer: SEIKO
Lock info ===========
IMEI       : 357915040391516
IMEI spNet : 3A 75 19 05 04 93 51 01 
IMEI svNet : 33 75 19 05 04 93 51 21 F9 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Country      : Finland
Operator     : NOKIA (Open)
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
Error collect lock info, try again
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : 33633
MMC pwd  : Backup saved
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Reading MMC password...
MMC pass Record found, saving...
1 MMC pwd records are found! Extracting...
-------------------------------
We have next Pass: aaaaa
-------------------------------
Done!

Set phone in Normal mode...
Restarting...
Done!

Phone disconected!

Connect phone on selected interface...
  Reply With Quote
The Following User Says Thank You to syed tuqeer For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 11:06.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.75470 seconds with 8 queries

SEO by vBSEO