GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 01-03-2019, 13:19   #706 (permalink)
Major Poster
 
Join Date: May 2013
Location: Baltics
Posts: 41
Member: 1948180
Status: Offline
Thanks Meter: 24
Nokia 3310 TA-1030 flashing done with best NK2


Nokia 3310 TA-1030 flashing done with best NK2

Open VPLfile : TA1030_059X9V2_11.02.11.vpl
Description : TA-1030 NDT EURO EH GREY LATIN LT
DeviceType : TA-1030
ProductCode : 059X9V2
SoftwareVer : 11.02.11
PPM LangPack :
[1] : Estonian (Estonia)
[2] : Latvian (Latvia)
[3] : Lithuanian (Lithuania)
[4] : Russian (Russia)
[5] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Care Suite USB Serial Port (COM24)
MODE : NOKIA USB SERIAL
PORT : 24
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0982DACFEE5CEE4BCEF7A7903AE0E52D
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : RETRO.11.02.11.p1
BOOT : SWR : 11.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : RETRO.11.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00C2 : 0025 : 0038 : 0000
NOR: [MXIC] MX25U12835FZNI_10G
NOR:
TSIZE : 0x01000000 [ 16,00 MB ]
PSIZE : 0x01000000 [ 16,00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 11.02.11 [TA-1030]
DEV SoftwareVersion : 11.02.11
SWInfo compare result : SAME

Load FlashSet :
MROM : TA-1030_ROM_eMP_11.02.11
LANG : TA-1030_LANG_PACK_ROM_EH_eMP_11.02.11_001
CUST : TA-1030_CUSTPACK_ROM_EH_EURO_LT_eMP_11.02.11_001
JUMP : TA-1030_JUMP_TABLE_EH_EURO_LT_eMP_11.02.11_001
VIVA : TA-1030_VIVA_eMP_11.02.11

Prepare FlashSet :
DCR : TA-1030_ROM_eMP_11.02.11
DCR : TA-1030_LANG_PACK_ROM_EH_eMP_11.02.11_001
DCR : TA-1030_CUSTPACK_ROM_EH_EURO_LT_eMP_11.02.11_001
DCR : TA-1030_JUMP_TABLE_EH_EURO_LT_eMP_11.02.11_001
DCR : TA-1030_VIVA_eMP_11.02.11

Prepare Target
SDS : OK : 0x00FF4000 : 0x0000C000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1030_ROM_eMP_11.02.11
Write : TA-1030_LANG_PACK_ROM_EH_eMP_11.02.11_001
Write : TA-1030_CUSTPACK_ROM_EH_EURO_LT_eMP_11.02.11_001
Write : TA-1030_JUMP_TABLE_EH_EURO_LT_eMP_11.02.11_001
Write : TA-1030_VIVA_eMP_11.02.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1030_ROM_eMP_11.02.11
Verify : TA-1030_LANG_PACK_ROM_EH_eMP_11.02.11_001
Verify : TA-1030_CUSTPACK_ROM_EH_EURO_LT_eMP_11.02.11_001
Verify : TA-1030_JUMP_TABLE_EH_EURO_LT_eMP_11.02.11_001
Verify : TA-1030_VIVA_eMP_11.02.11

Done!
Elapsed: 00:02:52
  Reply With Quote
The Following 4 Users Say Thank You to exploit69 For This Useful Post:
Show/Hide list of the thanked
Old 01-04-2019, 17:02   #707 (permalink)
No Life Poster
 
skyulock's Avatar
 
Join Date: Apr 2008
Posts: 1,113
Member: 757064
Status: Offline
Thanks Meter: 216
Donate money to this user
NOKIA 130 SUCCESSFULL FLASH DONE

Connect phone on selected interface...

SSChannel : Create SC
SSChannel : SC Created!
ProductID HWCode : RM-1035
Selected Variant : RM-1035 NDT MEA IK LATIN NG
Firmware Version : 11.00.11
Platform Version : S30+
SSChannel : DC Ok with code 0x06
Switch to IDM now ...

IDM initializing, wait...
Checking access to Products folder...
Folder for RM-1035 not exist. Attempt to create
Prepare done, collect info
[Query] : RM1035_059W042_11.00.11_053.vpl , 4.35 KiB
[Query] : RM-1035_CUSTPACK_ROM_IK_MEA_NG_eMP_11.00.11_002 , 47.64 KiB
[Query] : RM-1035_JUMP_TABLE_IK_MEA_NG_eMP_11.00.11_002 , 1.15 KiB
[Query] : RM-1035_LANG_PACK_ROM_IK_eMP_11.00.11_002 , 218.41 KiB
[Query] : RM-1035_ROM_eMP_11.00.11 , 295.57 KiB
[Query] : RM-1035_VIVA_eMP_11.00.11 , 2.47 MiB
Files to download : 6
Total size to download : 3.02 MiB
Downloading now, please, wait...
[Download] : RM1035_059W042_11.00.11_053.vpl
[Download] : RM-1035_CUSTPACK_ROM_IK_MEA_NG_eMP_11.00.11_002
[Download] : RM-1035_JUMP_TABLE_IK_MEA_NG_eMP_11.00.11_002
[Download] : RM-1035_LANG_PACK_ROM_IK_eMP_11.00.11_002
[Download] : RM-1035_ROM_eMP_11.00.11
[Download] : RM-1035_VIVA_eMP_11.00.11
Verify files now ...
[Verify Ok] : RM-1035_ROM_eMP_11.00.11
[Verify Ok] : RM-1035_LANG_PACK_ROM_IK_eMP_11.00.11_002
[Verify Ok] : RM-1035_CUSTPACK_ROM_IK_MEA_NG_eMP_11.00.11_002
[Verify Ok] : RM-1035_JUMP_TABLE_IK_MEA_NG_eMP_11.00.11_002
[Verify Ok] : RM-1035_VIVA_eMP_11.00.11
All done, all files were downloaded!

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1035_ROM_eMP_11.00.11
VIVA : RM-1035_VIVA_eMP_11.00.11
LANG : RM-1035_LANG_PACK_ROM_IK_eMP_11.00.11_002
CUST : RM-1035_CUSTPACK_ROM_IK_MEA_NG_eMP_11.00.11_002
JMPT : RM-1035_JUMP_TABLE_IK_MEA_NG_eMP_11.00.11_002
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 56 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : E493C27D2440BEC4FA8C46974181FBD4
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_11.00.11
SecureDecrypt : RM-1035_VIVA_eMP_11.00.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IK_eMP_11.00.11_002
SecureDecrypt : RM-1035_CUSTPACK_ROM_IK_MEA_NG_eMP_11.00.11_002
SecureDecrypt : RM-1035_JUMP_TABLE_IK_MEA_NG_eMP_11.00.11_002
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_11.00.11
Write : RM-1035_LANG_PACK_ROM_IK_eMP_11.00.11_002
Write : RM-1035_CUSTPACK_ROM_IK_MEA_NG_eMP_11.00.11_002
Write : RM-1035_JUMP_TABLE_IK_MEA_NG_eMP_11.00.11_002
Write : RM-1035_VIVA_eMP_11.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_11.00.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IK_MEA_NG_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_JUMP_TABLE_IK_MEA_NG_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11
CODE_VERIFY : Ok
FORMAT FFS : skipped
Rebooting phone now

Flashing done!
Total flash time : 00:00:54
Reboot phone Ok

ReadInfo can't be done, because 'FactorySets' unchecked! Re-insert battery and power up manually
Connect phone on selected interface...
  Reply With Quote
The Following 3 Users Say Thank You to skyulock For This Useful Post:
Show/Hide list of the thanked
Old 01-05-2019, 17:26   #708 (permalink)
Freak Poster
 
alorpothe's Avatar
 
Join Date: Aug 2014
Location: dhaka bangladesh
Age: 29
Posts: 290
Member: 2235775
Status: Offline
Thanks Meter: 165
Lumia 800 rm-801 unlock via infinity best free with easy work

Card found: S/N : AE****, v0122
Registered to: kaziiakhtar

Connect phone on selected interface...

Core : v2.29 , WP7x FlashEngine : v8.3

==== Settings :
Reset EFS : Disabled
Secure Erase : Disabled

==== Flash Files selected :
OSBL : RM801_12w22_prod_generic_nokia_osbl.esco
AMSS : RM801_12w22_prod_generic_amss.esco
ADSP : RM801_12w22_prod_generic_adsp.esco
WP : RM801_12220_prod_797_01_boot.esco
UDA : RM801_12w22_prod_generic_user_area_erase.esco

Check files done, All files are Ok

Dead Mode is Selected
Waiting for USB device...
--- Press and hold 'Volume Up' button and insert cable! ---
-> Phone not found..
Phone found!
WP7x Nokia Phone detected
Read info... Ok

=== Main Info ===
Phone : RM-801|NOKIA Lumia 800
Phone SwVer : 1750.0823.8858.12460
Phone IMEI : 359289040743565
ProductCode : 059L7C6
HW Version : 112.1402.2.3
=== SimLock ===
State : Locked
Info : [Orange] Orange UK GB GV
Info ====
If phone not ask for PIN/PUK - it unlocked by code
Phone can be flashed without Re-Lock : disable 'RESET EFS' option before flashing
=== Other ===
Battery Life : 71
SerialNum : 0013944AB
Base Code : 059J2N6
ModuleCode : 0205051
NCSD Ver : 1.9
BT MAC : 1436053924450000000000
Wlan MAC : 143605394B5500
Public ID: 64E35EC5DE8BD9FFB22DB594EA106C

Done!

Setting device to OSBL mode...
Waiting for USB device...
Connected in QCBL
Trying init eMMC subsystem
Checking for device...
Qualcomm MMC Storage , rev : 2.31
Drive space : 14 GiB
Drive Index : 1

Processing MBR...
Processing EBR...

Check product info...
Current OSBL mode : QUALCOMM
Found : SeaRay
Model : RM-801 , RM-819
Model : Lumia 800
Phone Id set to : 359289040743565

Processing Lumia Wp7x Patch Unlock
Found Location #1
State : Not Patched
Patch ...
Patch Ok
Found Location #2
State : Not Patched
Patch ...
Patch Ok

Unlock Code (PIN) : 00000000
Unlock Code (PUK) : 0000000000
1. Power Up phone
1.0 Press Restart button
1.1 Or Reconnect Battery / 15sec. hold PowerOn, after PowerOn
2. Enter code (PIN or PUK)
3. After PIN/PUK accepted, you can restore state via "Restore SimLock state"
(c) Wp7x Patch Unlock : Bph&co (Genie Projects)
All done!

Lumia eMMC drive disconected!

Connect phone on selected interface...
  Reply With Quote
The Following 7 Users Say Thank You to alorpothe For This Useful Post:
Show/Hide list of the thanked
Old 01-06-2019, 09:01   #709 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,749
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,893
Nokia 230 Format / Repair Done :)

Code:
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 50 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 8A8DEC3636D2DBDFA7E394812BD8AB2D
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DOHA.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Doha.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00DC0000-0x00FF3FFF , LEN : 0x00234000

Executing FFS FORMAT now...
FAT_RANGE : 0x00DC0000-0x00FF3FFF , LEN : 0x00234000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Elapsed: 00:00:27
Connect phone on selected interface...
  Reply With Quote
The Following 3 Users Say Thank You to syed tuqeer For This Useful Post:
Show/Hide list of the thanked
Old 01-06-2019, 09:01   #710 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,749
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,893
Nokia 105 (RM-1133) format / Repair Done :)

Code:
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 50 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 9B08D75FFB09B595904E1576F4C89C34
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : LAGOS61D.15.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Lagos.fg
DA_VERIFY : 00
DA_JUMP   : 00100000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , 
[0] : FLASH_DIE : 00EF 0070 0016 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000

Executing FFS FORMAT now...
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Elapsed: 00:00:19
Connect phone on selected interface...
  Reply With Quote
The Following 3 Users Say Thank You to syed tuqeer For This Useful Post:
Show/Hide list of the thanked
Old 01-06-2019, 10:06   #711 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,308
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,199
Smile Nokia 225

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-969_ROM_eMP_30.06.11
VIVA : RM-969_VIVA_eMP_30.06.11
LANG : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
CUST : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
JMPT : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 346 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 4E76110437AE881AE201C61CEA669585
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
SecureDecrypt : RM-969_ROM_eMP_30.06.11
SecureDecrypt : RM-969_VIVA_eMP_30.06.11
SecureDecrypt : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
SecureDecrypt : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
SecureDecrypt : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
OVRLP : 000069B900000001
PHPID : Rivendell.10.03.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-969_ROM_eMP_30.06.11
Write : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
Write : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-969_VIVA_eMP_30.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-969_ROM_eMP_30.06.11
[VERIFY] DONE : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
[VERIFY] DONE : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
[VERIFY] DONE : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
[VERIFY] DONE : RM-969_VIVA_eMP_30.06.11
CODE_VERIFY : Ok
Will Upload FAT Image now
Write : RM-969_FATIMAGE_IJ_30.06.11
FAT Image Flash done!
FAT Verify Ok
Rebooting phone now

Flashing done!
Total flash time : 00:04:21
Reboot phone Ok

Connect phone on selected interface...
  Reply With Quote
The Following 3 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 01-06-2019, 10:33   #712 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,308
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,199
Smile Rm-969

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM346)
MODE : NOKIA USB SERIAL
PORT : 346
BROM : Init BROM
BROM init passed!
CHIP : MT625A , SBID : 0xCA01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 6DBEC826EB37FCD881DBEBDC1CC175EA
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : Rivendell.10.03.11.p1
BOOT : SWR : 10.03.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT625A
AGENT : Rivendell.10.03.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x88

NOR: 00EF : 0060 : 0018 : 0000
NOR: [WINBOND] W25Q128FW
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 30.06.11 [RM-969]
DEV SoftwareVersion : 10.03.11
SWInfo compare result : DEVICE SW ( Major version ) is LOWER, than in VPL!

Load FlashSet :
MROM : RM-969_ROM_eMP_30.06.11
LANG : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
CUST : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
JUMP : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
VIVA : RM-969_VIVA_eMP_30.06.11

Prepare FlashSet :
DCR : RM-969_ROM_eMP_30.06.11
DCR : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
DCR : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
DCR : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
DCR : RM-969_VIVA_eMP_30.06.11

Prepare Target
SDS : OK : 0x00FF4000 : 0x0000C000
FFS Format Ok!

Erase Target Flash
Erase done!

Write Target Flash
Write : RM-969_ROM_eMP_30.06.11
Write : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
Write : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-969_VIVA_eMP_30.06.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : RM-969_ROM_eMP_30.06.11
Verify : RM-969_LANG_PACK_ROM_IJ_eMP_30.06.11_001
Verify : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
Verify : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
Verify : RM-969_VIVA_eMP_30.06.11

Done!
Elapsed: 00:04:04

Reconnect Power/Cable!
  Reply With Quote
The Following 3 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 01-06-2019, 16:19   #713 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,749
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,893
Nokia 130 Write Firmware Done :)

Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ... 
MAUI : RM-1035_ROM_eMP_10.01.11
VIVA : RM-1035_VIVA_eMP_10.01.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_AF_eMP_10.01.11_001
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_AF_eMP_10.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 50 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 03618A73984EE1D5C3C1F74FA489486A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.01.11
SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_AF_eMP_10.01.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_AF_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.01.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_AF_eMP_10.01.11_001
Write : RM-1035_JUMP_TABLE_IJ_MEA_AF_eMP_10.01.11_001
Write : RM-1035_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_AF_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_AF_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:03
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:     10.01.11 00-00-00 RM-1035
IMEI:  358908075926842
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :   IJ
Product code:  059W037
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Phone disconected!

Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to syed tuqeer For This Useful Post:
Old 01-07-2019, 12:39   #714 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,308
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,199
Smile Ta-1034

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 346 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : A5AF1838183901CDB7FF6BE8FBBCB33A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Old 01-10-2019, 12:12   #715 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,749
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,893
Nokia 108 Write Firmware Done :)

Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ... 
MAUI : RM-944_ROM_eMP_20.06.11
VIVA : RM-944_VIVA_eMP_20.06.11
LANG : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
CUST : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
JMPT : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 50 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : BD54E20FE32D551D0CA188FB499EB3D5
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.10.04.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_20.06.11
SecureDecrypt : RM-944_VIVA_eMP_20.06.11
SecureDecrypt : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
SecureDecrypt : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
OVRLP : 000069B900000001
PHPID : Bree.10.04.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-944_ROM_eMP_20.06.11
Write : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
Write : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_VIVA_eMP_20.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-944_ROM_eMP_20.06.11
[VERIFY] DONE : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
[VERIFY] DONE : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_VIVA_eMP_20.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:15
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:     20.06.11 00-00-00 RM-944
IMEI:  357270057455220
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :   IJ
Product code:  059S7R0
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Phone disconected!

Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to syed tuqeer For This Useful Post:
Old 01-13-2019, 06:33   #716 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: B A N G L A D E S H
Posts: 1,802
Member: 2556542
Status: Offline
Thanks Meter: 668
nokia 2 TA-1029 frp reset and firmware backup done

Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Use BOOT JIG or EDL cable!
3. Insert USB cable, press "POWER_ON" button few times, if need

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
BB_IDC_SWB : 00000000
ID_BLOCK_S : 11C0708F
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 2D29CCF2EE6A60E1C865DEF6787FA250
ID_BLOCK_L : C0F097191FF03C7BB128E215B044AD9A
Use BEST Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!


Brand     : Nokia
ProdName  : Dynamo_00WW
ProdModel : Nokia 2
Device    : E1M
Manufact. : HMD Global
NickName  : Nokia 2
Dev Build : Dynamo_00WW-user 7.1.1 NMF26F 00WW_0_68B release-keys
Dev CPU   : MSM8909
Dev SKU   : 600WW
SKU Vendor: NOKIA
SKU Locale: Worldwide
SKU Carier: FIH Generic

Intenal SW version : 
SLOT A : E1M-068B-0-00WW-B0

DevInfo : Nokia__Dynamo_00WW__E1M__600WW_E1M-068B-0-00WW-B0

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : sysinfo.cfg
[Read Ok] : splash.img
[Read Ok] : ftm.img
[Read Ok] : hidden.img
[Read Ok] : cda.img
[Read Ok] : label.img
[Read Ok] : recovery.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : system.img
[Read Ok] : misc.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : cmnlib.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : Nokia MSM8909 / eMMC
Firmware Size : 3005 MiB

Done!
Elapsed: 00:06:53

Reconnect Power/Cable!
  Reply With Quote
The Following 5 Users Say Thank You to kothamamun For This Useful Post:
Show/Hide list of the thanked
Old 01-13-2019, 13:59   #717 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,749
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,893
Nokia Asha 303 write firmware Done :)

Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm763__14.87.mcusw
PPM : rm763__14.87.ppm_ma2
CNT : rm763__14.87.image_ma2_059J1N7
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007400C192103032108
CPU ID :       RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     3E770000FFFB3C400A57732F64796135CCE4B988
ASIC MODE ID:  00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID:        2CAC45E23BC33C8B
Use RAPUv21_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 351665050819999
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\351665050819999_CRT.rpl

   ===Flashing [MCU]===
Erase : Processing rm763__14.87.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm763__14.87.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 291 blocks
TIME : Write time : 00:00:06 
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm763__14.87.ppm_ma2
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm763__14.87.ppm_ma2
Total writen 53 blocks
TIME : Write time : 00:00:01 
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm763__14.87.image_ma2_059J1N7
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02 
Write : Processing rm763__14.87.image_ma2_059J1N7
Total writen 329 blocks
TIME : Write time : 00:00:05 
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:16
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 303
Software Info:     V 14.87 17-10-12 RM-763 (c) Nokia            
IMEI:  351665050819999
PPM version :   V 14.87 17-10-12 RM-763 (c) Nokia             MA2
Product code:  059J1F2
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 43 certs
Certificates found, skip upload ...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:00:51
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok
  Reply With Quote
The Following 3 Users Say Thank You to syed tuqeer For This Useful Post:
Show/Hide list of the thanked
Old 01-15-2019, 10:27   #718 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,308
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,199
Smile Nokia 3310 TA-1030 Language Change Done

Operation : Write FirmWare [ v1.09 ]
Setting : UserData erase : False
Setting : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM490)
MODE : NOKIA USB SERIAL
PORT : 490
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 36C4DF22609DAB277C141C5D6D3ED88B
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : RETRO.11.02.11.p1
BOOT : SWR : 11.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : RETRO.11.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00C2 : 0025 : 0038 : 0000
NOR: [MXIC] MX25U12835FZNI_10G
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 11.02.11 [TA-1030]
DEV SoftwareVersion : 11.02.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1030_LANG_PACK_ROM_IJ_eMP_11.02.11_001
CUST : TA-1030_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.02.11_001
JUMP : TA-1030_JUMP_TABLE_IJ_MEA_PK_eMP_11.02.11_001

Prepare FlashSet :
DCR : TA-1030_LANG_PACK_ROM_IJ_eMP_11.02.11_001
DCR : TA-1030_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.02.11_001
DCR : TA-1030_JUMP_TABLE_IJ_MEA_PK_eMP_11.02.11_001

Prepare Target
SDS : OK : 0x00FF4000 : 0x0000C000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1030_LANG_PACK_ROM_IJ_eMP_11.02.11_001
Write : TA-1030_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.02.11_001
Write : TA-1030_JUMP_TABLE_IJ_MEA_PK_eMP_11.02.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1030_LANG_PACK_ROM_IJ_eMP_11.02.11_001
Verify : TA-1030_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.02.11_001
Verify : TA-1030_JUMP_TABLE_IJ_MEA_PK_eMP_11.02.11_001

Done!
Elapsed: 00:01:27

Reconnect Power/Cable!
  Reply With Quote
The Following 3 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 01-15-2019, 14:52   #719 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,308
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,199
Smile 💪💪💪 Nokia 106 TA-1114 User Code Reset Done 💪💪💪

Use Old Exe just Reset user Code 100% Done

Connect phone on selected interface...


Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 490 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : CF1A05C3BA9735BD5B204E14E0306EA8
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...
  Reply With Quote
The Following 7 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old Yesterday, 17:13   #720 (permalink)
Freak Poster
 
Join Date: Oct 2010
Posts: 123
Member: 1429766
Status: Offline
Thanks Meter: 27
Exclamation Nokia TA-1057 FRP Successfully Removed BEST2

Card found : 05XXXXX , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.09

Operation : Reset Settings [ v1.09 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
- > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MediaTek USB Port (COM30)
MODE : BOOTROM
PORT : 30
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia_All_InOne_DA_v02.2018.1809
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: 150100514536334D42037B8672355BF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 49B7CE31FB05053111676AAFF1CC0795

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM215)
MODE : PRELOADER PORT
PORT : 215

Boot done!

Format Ok : USERDATA
Format Ok : RESET PROTECTION
Format Ok : PRIVACY

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to xukca For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 21:03.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.31918 seconds with 8 queries

SEO by vBSEO