GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 05-25-2017, 16:12   #76 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,911
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,968
Nokia 108 Read User Code Done :)


Code:
Connect phone on selected interface...

Phone found!
MTKx Nokia Phone detected
Read info... Ok


Reading Phone Info....
Software ver : 20.06.11 00-00-00 RM-944
IMEI 1  :      351725061712060
IMEI 2  :      351725061712078
XappVer :      000008F2
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM     :      IJ
CNT     :      Bree.20.06.11.p4
Product SN   :     74DAC79BH
Product code :     059S7R0
Base Prd.code:     059S0R7
Module code  :     0205624
Hardware info=======
HWID  : 1003
LCDVer: TPO
Lock info ===========
IMEI       : 351725061712060
IMEI spNet : 3A 15 27 05 16 17 02 06 

Conf key     : 800000000004000B
Provider key : 0010100000000000
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

SimLock status : Ok
Security status : Ok

Done!

Software Info:     20.06.11 00-00-00 RM-944
IMEI:  351725061712060
PPM version :   IJ
Product code:  059S7R0
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 43 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 7F4E3E440147E3E203DD71F03680335E
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA0_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
MT625x : Read User Code

User Code : 7176139

Done!
Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to syed tuqeer For This Useful Post:
Old 05-26-2017, 13:05   #77 (permalink)
No Life Poster
 
Arafat Mashaka's Avatar
 
Join Date: Apr 2008
Location: Burundi Bujumbura
Posts: 560
Member: 750759
Status: Online
Sonork: 75101010
Thanks Meter: 108
Donate money to this user
Lumia 520 with Blue screen flash done

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Collect Info...
=== Nokia Flash App info :
Protocol Version : 1.15
Protocol Implementation : 1.28
=== Phone Initial info :
Phone Model ID : Nokia.MSM8227.P6036.1.2
=== eMMC info :
eMMC Vendor : Hynix
eMMC CID : 0090
eMMC Size : 7400 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : F771E62AF89994064F77CD3BC16829503BDF9A3D
=== Other info :
SD present : False

Full Check skipped , will be checked by ImageSignature


Battery Level : 28%
RPMB Provision Status Code : 0x0101
Device RAM size : 512 MiB
Device not have ATRP
Backup to RAM Ok!

FFU : RM914_3058.50000.1425.0010_RETAIL_eu_france_226_10 _452389_prd_signed.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted
Perform Data Partition Erase
Error : 06 : Data Partition Not Found! Seems as damaged
Will Fix partitions by flash whole image
Sending FFU Header CertData
Header sent , accepted
Skip Data Partition Erase
Sending FFU Payload Data...
Finishing flashing

Flashing done!
Green Light

Image Sent, processing PostFlash
FinalConfig : abnormal status, error code : 0xFF7F0000
Make Factory Set : Ok
Restore RAMBkp : Ok
Update NVI from Image
Ok , NVI will be updated on first boot!
PostFlash Finished

Total flash time : 00:04:16

Rebooting

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok
  Reply With Quote
The Following 2 Users Say Thank You to Arafat Mashaka For This Useful Post:
Old 05-26-2017, 16:06   #78 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Nokia 206 Flashing Done With Best

Nokia 206 Flashing Done With Best

Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__04.52.mcusw
PPM : rm872__04.52.ppm_m2
CNT : rm872__04.52.image_m2_059Q8L5
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...

SL3 Simlock read (XGOLD) ... Ok
WMDRM Key read ... Ok
CMLA Key read ... Ok

Reboot....

-> If Phone start charge - just reinsert battery fast

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 356456061476366
IMEI 2 : 356456061476374
PCcode : 059Q4J7

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
CMLA_KEY Data saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\356456061476366_XG213.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm872__04.52.mcusw
Image : rm872__04.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:02 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:00:50 
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:34
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0xFA4D

   ===Flashing [PPM]===
File : rm872__04.52.ppm_m2
Image : package_m2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ... 
Erase done, time : 00:00:08 
Write , Start : 0x41A80000 , Len : 0x003C68F0
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0xC9E6

   ===Flashing [CNT]===
File : rm872__04.52.image_m2_059Q8L5
Image : package_m2_059Q8L5.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ... 
Erase done, time : 00:01:08 
Write , Start : 0x42100000 , Len : 0x01040000
Flashing , wait ...
Region flash done, time : 00:00:22
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:02 
No write data, skip
CRC check passed , 0xDE0E

Flashing done!
Total flash time : 00:03:16
Reboot phone now...

Reading Phone Info....
Connected phone -   206
Software Info:     V 04.52 30-06-13 RM-872 (c) Nokia            
IMEI:  356456061476366
PPM version :   V 04.52 30-06-13 RM-872 (c) Nokia             M2
Product code:  059Q4J7
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:06
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 05-26-2017, 16:14   #79 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile QMobile Noir W80 Frp Reset Done

QMobile Noir W80 Frp Reset Done


Code:
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A32374D4202B571C6C0A2A9
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM72J
[eMMC] : FLASH_CID : 150100464A32374D4202B571C6C0A2A9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xE6C52A7D20168641BE208B1FBA59825D
INT RAM    : 0x00020000
EXT RAM    : 0x30000000 [768 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:29
Reconnect Power/Cable!
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 05-27-2017, 07:03   #80 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Nokia X2-02 Flashing Done

Nokia X2-02 Flashing Done

Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm694__11.84.mcusw
PPM : rm694__11.84.ppm_m_a
CNT : rm694__11.84.image_m_a_059D1B3
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 357879046635880
IMEI 2 : 357879046635898
PCcode : 059F297

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\357879046635880_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm694__11.84.mcusw
Image : rm694__11.84.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:05 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01980000
Erasing, wait ... 
Erase done, time : 00:02:29 
Write , Start : 0x40280000 , Len : 0x01900000
Flashing , wait ...
Region flash done, time : 00:00:33
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0xB615

   ===Flashing [PPM]===
File : rm694__11.84.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00700000
Erasing, wait ... 
Erase done, time : 00:00:27 
Write , Start : 0x41C00000 , Len : 0x00440340
Flashing , wait ...
Region flash done, time : 00:00:05
CRC check passed , 0x40FC

   ===Flashing [CNT]===
File : rm694__11.84.image_m_a_059D1B3
Image : package_m_a_059D1B3.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42300000 , Len : 0x01B20000
Erasing, wait ... 
Erase done, time : 00:04:55 
Write , Start : 0x42300000 , Len : 0x00DC0000
Flashing , wait ...
Region flash done, time : 00:00:26
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:09 
No write data, skip
CRC check passed , 0x1F63

Flashing done!
Total flash time : 00:09:17
Reboot phone now...
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 05-27-2017, 13:35   #81 (permalink)
Junior Member
 
Join Date: Jun 2016
Posts: 34
Member: 2588227
Status: Offline
Thanks Meter: 14
Cool Nokia 130 Format Done

Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ... 
MAUI : RM-1035_ROM_eMP_11.00.11
VIVA : RM-1035_VIVA_eMP_11.00.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 19 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 944B6B61294DFA224BC9DBF8222BF3A4
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_11.00.11
SecureDecrypt : RM-1035_VIVA_eMP_11.00.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_11.00.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_VIVA_eMP_11.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_11.00.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:04
  Reply With Quote
The Following 2 Users Say Thank You to STARZONE For This Useful Post:
Old 05-30-2017, 05:54   #82 (permalink)
No Life Poster
 
muzammal mudass's Avatar
 
Join Date: Oct 2012
Location: Pakistan ,Sahiwal ,Bwn
Age: 25
Posts: 1,026
Member: 1819120
Status: Offline
Sonork: 100.1648344
Thanks Meter: 1,315
Nokia 225 Code Reset Done

Nokia 225 Code Reset Done

Code:
Connect phone on selected interface...


Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 46 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : A8D500F350FB1F59A594297BE7543855
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000

Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Elapsed: 00:00:33
Connect phone on selected interface...


Br
Muzammal Mudasser
  Reply With Quote
The Following 2 Users Say Thank You to muzammal mudass For This Useful Post:
Old 05-30-2017, 06:58   #83 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Nokia 220 Format Done

Nokia 220 Format Done

Code:
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 19 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : CC2C2F31F8597919EBE8C9A00D04C417
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000

Executing FFS FORMAT now...
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Elapsed: 00:01:05
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 05-31-2017, 06:55   #84 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Nokia 130 Flashing Done

Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ... 
MAUI : RM-1035_ROM_eMP_11.00.11
VIVA : RM-1035_VIVA_eMP_11.00.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 19 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 5B9400B1179DCD753A45F0275D78A55E
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_11.00.11
SecureDecrypt : RM-1035_VIVA_eMP_11.00.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_11.00.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_VIVA_eMP_11.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_11.00.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:03
Reboot phone Ok
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 05-31-2017, 15:08   #85 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Nokia 110 Flashing Done

Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.51.mcusw
PPM : rm827__03.51.ppm_m2
CNT : rm827__03.51.image_m2_059N2R0
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 351970057732561
IMEI 2 : 351970057732579
PCcode : 059N2R0

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351970057732561_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm827__03.51.mcusw
Image : rm827__03.51.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:06 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ... 
Erase done, time : 00:02:33 
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:35
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0xA3D6

   ===Flashing [PPM]===
File : rm827__03.51.ppm_m2
Image : package_m2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ... 
Erase done, time : 00:00:19 
Write , Start : 0x41BC0000 , Len : 0x0030F748
Flashing , wait ...
Region flash done, time : 00:00:03
CRC check passed , 0x4605

   ===Flashing [CNT]===
File : rm827__03.51.image_m2_059N2R0
Image : package_m2_059N2R0.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ... 
Erase done, time : 00:01:38 
Write , Start : 0x421C0000 , Len : 0x00F20000
Flashing , wait ...
Region flash done, time : 00:00:24
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:09 
No write data, skip
CRC check passed , 0x2091

Flashing done!
Total flash time : 00:02:13
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 110
Software Info:     V 03.51 06-08-13 RM-827 (c) Nokia            
IMEI:  351970057732561
PPM version :   V 03.51 06-08-13 RM-827 (c) Nokia             M2
Product code:  059N2R0
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:02:56
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 06-01-2017, 08:05   #86 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Nokia 311 Flashing Done With Best

Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm714__07.36.mcusw
PPM : rm714__07.36.ppm_maa
CNT : rm714__07.36.image_maa_059F7S1
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007400C192103042108
CPU ID :       RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     BC750080FFFB7C40DEFEB230C98418D7CFB5AC20
ASIC MODE ID:  00
ROOT KEY HASH: 6D956B2D26FEC3C784E216492B7CC90A
ROM ID:        2CAC45E21CB478AF
Use RAPUv21_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 359330046548960
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\359330046548960_CRT_2nd.rpl


 === SW Version Check === 
- > REFLASHING
 === SW Version Check === 

   ===Flashing [MCU]===
Erase : Processing rm714__07.36.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm714__07.36.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 287 blocks
TIME : Write time : 00:00:04 
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm714__07.36.ppm_maa
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm714__07.36.ppm_maa
Total writen 90 blocks
TIME : Write time : 00:00:01 
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm714__07.36.image_maa_059F7S1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02 
Write : Processing rm714__07.36.image_maa_059F7S1
Total writen 731 blocks
TIME : Write time : 00:00:12 
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:21
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 06-01-2017, 08:43   #87 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Nokia 302 Firmware Download And Flashing Done

Code:
SSChannel : Create SC
SSChannel : SC Created!
ProductID HWCode : RM-813
Selected Variant : N302_CV_PK_MVP_VAR212714_Grey_14-26-600_V1
Firmware Version : 14.26
Platform Version : Series 40
SSChannel : DC Ok with code 0x04
Switch to IDM now ...

IDM initializing, wait...
Checking access to Products folder...
Folder for RM-813 not exist. Attempt to create
Prepare done, collect info
[Query] : rm813__14.26.image_ma3_059L164_059N7S8_579_01 , 27.81 MiB 
[Query] : rm813__14.26.mcusw , 31.85 MiB 
[Query] : rm813__14.26.ppm_ma3 , 5.50 MiB 
[Query] : RM813_059N7S8_14.26_017.vpl , 3.75 KiB 
Files to download : 4
Total size to download : 65.16 MiB
Downloading now, please, wait...
[Download] : rm813__14.26.image_ma3_059L164_059N7S8_579_01
[Download] : rm813__14.26.mcusw
[Download] : rm813__14.26.ppm_ma3
[Download] : RM813_059N7S8_14.26_017.vpl
Verify files now ... 
[Verify Ok] : rm813__14.26.mcusw
[Verify Ok] : rm813__14.26.ppm_ma3
[Verify Ok] : rm813__14.26.image_ma3_059L164_059N7S8_579_01
All done, all files were downloaded!

Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm813__14.26.mcusw
PPM : rm813__14.26.ppm_ma3
CNT : rm813__14.26.image_ma3_059L164_059N7S8_579_01
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007400C192103032108
CPU ID :       RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     3C320000FFFB3C4036F485EF604E671AEF3EBF9B
ASIC MODE ID:  00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID:        2CAC45E23BC33C8B
Use RAPUv21_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 05BDE0ECC36CDEAA016A0565CB6BAE0B1585232E
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352448050008247
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\352448050008247_CRT.rpl


 === SW Version Check === 
- > REFLASHING
 === SW Version Check === 

   ===Flashing [MCU]===
Erase : Processing rm813__14.26.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm813__14.26.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 274 blocks
TIME : Write time : 00:00:05 
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm813__14.26.ppm_ma3
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm813__14.26.ppm_ma3
Total writen 44 blocks
TIME : Write time : 00:00:00 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm813__14.26.image_ma3_059L164_059N7S8_579_01
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02 
Write : Processing rm813__14.26.image_ma3_059L164_059N7S8_579_01
Total writen 223 blocks
TIME : Write time : 00:00:03 
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:13
  Reply With Quote
The Following 6 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 06-03-2017, 06:46   #88 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,544
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,382
Smile Microsoft Nokia 215 RM-1110 Flashing Done

Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ... 
MAUI : RM-1110_ROM_eMP_12.03.11
VIVA : RM-1110_VIVA_eMP_12.03.11
LANG : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
CUST : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
JMPT : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 19 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 0949F62C208327D45EAD54F0A4FFF13B
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : JET.12.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Jet.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
SecureDecrypt : RM-1110_ROM_eMP_12.03.11
SecureDecrypt : RM-1110_VIVA_eMP_12.03.11
SecureDecrypt : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
SecureDecrypt : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
SecureDecrypt : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
OVRLP : 000069B900000001
PHPID : JET.12.03.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1110_ROM_eMP_12.03.11
Write : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
Write : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
Write : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
Write : RM-1110_VIVA_eMP_12.03.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1110_ROM_eMP_12.03.11
[VERIFY] DONE : RM-1110_LANG_PACK_ROM_IJ_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_JUMP_TABLE_IJ_MEA_PK_eMP_12.03.11_001
[VERIFY] DONE : RM-1110_VIVA_eMP_12.03.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00E80000-0x00FF3FFF , LEN : 0x00174000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:59
Reboot phone Ok
  Reply With Quote
The Following 5 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
Old 06-03-2017, 06:50   #89 (permalink)
Junior Member
 
Join Date: Mar 2017
Posts: 13
Member: 2700064
Status: Offline
Thanks Meter: 4
Sure , this is not doubt ,
  Reply With Quote
Old 06-03-2017, 10:16   #90 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,911
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 3,968
Nokia 105 Write Firmware Done :)

Code:
Connect phone on selected interface...

Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm908_003.400
PPM : rm908_003.40ic
CNT : rm9080_nai03.40ic

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH VEN : 000000EF
FLASH DIE  : 00006017
FLASH ID : UNKNOW [Not In Base]
Boot Done!

   ===Flashing [MCU]===
File : rm908_003.400
Image : hw_f31_rm908_62_mcusw_03.40_Best.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ... 
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00C60000 , Len : 0x00221240
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00FFC000 , Len : 0x00004000
Erasing, wait ... 
Erase done
Write , Start : 0x00FFC000 , Len : 0x00000040
Flashing , wait ...
Region flash done
Check : 5960
   ===Flashing [PPM]===
File : rm908_003.40ic
Image : hw_f31_rm908_62_ppm_03.40ic_Best.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00210000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00210000 , Len : 0x001C5A00
Flashing , wait ...
Region flash done
Check : 06A7
   ===Flashing [CNT]===
File : rm9080_nai03.40ic
Image : hw_f31_rm908_62_image_03.40ic_Best.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00EB0000 , Len : 0x000D0000
Erasing, wait ... 
Erase done
Write , Start : 0x00EB0000 , Len : 0x000661C0
Flashing , wait ...
Region flash done
Check : 919A

Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!


Init Service mode... Wait...

Afterflash settings...
SW ver : V 03.40
08-08-13
RM-908
(c) Nokia
IMEI   : 358134054959718
PCode  : 059R449
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
All done!

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - Ok

Reading Phone Info....
SW ver  : V 03.40 08-08-13 RM-908 (c) Nokia
IMEI    :      358134054959718
PPM     :      V 03.40
08-08-13
RM-908
(c) Nokia
IC
PCode   :      059R449
BPCode  :      059Q858
HWID    :      1000
LCDVer  :      CMI:BEIHAIv01
ILI9163C
IMEI    :      358134054959718
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000004000-2
Sl Aux   : 000B0000
Hw Sig   : 070F24A80FEF6A2C
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Done!

Connect phone on selected interface...

Phone disconected!

Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to syed tuqeer For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 10:19.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 1.97928 seconds with 8 queries

SEO by vBSEO