GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 11-04-2019, 15:30   #946 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,910
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 592
Nokia C1-01


Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
PPM : rm607__06.15.ppm_mi
CNT : rm607__06.15.image_mi_059J840
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_2.5_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI : 355962040464689
PCcode : 0596379

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\355962040464689_XG 213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [PPM]===
File : rm607__06.15.ppm_mi
Image : package_mi.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:16
Write , Start : 0x41C00000 , Len : 0x0030A13C
Flashing , wait ...
Region flash done, time : 00:00:03
CRC check passed , 0xF370

===Flashing [CNT]===
File : rm607__06.15.image_mi_059J840
Image : package_mi_059J840.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42200000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:01:38
Write , Start : 0x42200000 , Len : 0x00C80000
Flashing , wait ...
Region flash done, time : 00:00:16
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip
CRC check passed , 0xDC35

Flashing done!
Total flash time : 00:02:23
Reboot phone now...

Reading Phone Info....
Connected phone -
Software Info: V 06.15 25-11-11 RM-607 (c) Nokia
IMEI: 355962040464689
PPM version : V 06.15 25-11-11 RM-607 (c) Nokia MI
Product code: 0596379
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 39 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:03:12
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 11-04-2019, 15:32   #947 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,910
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 592
Nokia 150

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1190_DUBAI_ROM_eMP_11.00.11
VIVA : RM-1190_DUBAI_VIVA_eMP_11.00.11
LANG : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
CUST : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
JMPT : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 254 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 484B3F8F77CCD030F77C3E825AB754A0
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.11.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
SecureDecrypt : RM-1190_DUBAI_ROM_eMP_11.00.11
SecureDecrypt : RM-1190_DUBAI_VIVA_eMP_11.00.11
SecureDecrypt : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
SecureDecrypt : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
SecureDecrypt : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : DUBAI61D.11.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1190_DUBAI_ROM_eMP_11.00.11
Write : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_VIVA_eMP_11.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1190_DUBAI_ROM_eMP_11.00.11
[VERIFY] DONE : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
[VERIFY] DONE : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
[VERIFY] DONE : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
[VERIFY] DONE : RM-1190_DUBAI_VIVA_eMP_11.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time : 00:00:51
Reboot phone Ok

ReadInfo can't be done! Re-insert battery and power up phone manually

Connect phone on selected interface...
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 11-06-2019, 08:17   #948 (permalink)
Junior Member
 
Join Date: Oct 2012
Location: Nigeria
Posts: 33
Member: 1819074
Status: Offline
Thanks Meter: 9
Smile Nokia 3.2 ta-1156 flashing done

Card found : 07919XXX , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.18


Load : F:\Users\BELLO SULE\Downloads\HMDSW_DPL_sprout-015B-0-00WW-B01_user.zip
Device : DPL_sprout
Android: 9.0
SKU ID : Generic
ROM Ver: HMDSW_DPL_sprout-015B-0-00WW-B01_user
Load Ok!

Operation : Flash Firmware [FTM] [ v1.18 ]
Setting : UserData preserve : False
Setting : FRP Reset : True
Setting : Keep SVC : True

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear

Wait for phone...
Connect Ok!
Device Found!
Initialize ...
Initialize Ok!

Dev Model : Deadpool
HW version : 1
HW variant : QRD eMMC
HW RF_BAND : GSM_850_900_1800_1900^W1_5_8^L_1_3_5_7_8_20_28_38_ 40
SW version : V1.03D_B01
SW CurrSlot : B
SW serialnm : 4T89623AA6951800214
SW secured : YES
Bootloader type : WT2
Security Version : 0002

Prepare base package, please, wait ...
Prepare data package, please, wait ...
Prepare update package, please, wait ...


Device : Deadpool ( Deadpool )
BLType : WT2
SecVer : 02
Device authentification ...
Processing server operation ...
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version is valid
Process...
Finished
Disconnected
Finished
Challenge : Process
Challenge : Passed!

OP : Initial

Process : sbl1 : sbl1.mbn
Process : rpm : rpm.mbn
Process : dsp : adspso.bin
Process : tz : tz.mbn
Process : cmnlib : cmnlib_30.mbn
Process : cmnlib64 : cmnlib64_30.mbn
Process : keymaster : km4.mbn
Process : devcfg : devcfg.mbn
Process : modem : NON-HLOS.bin
Process : aboot : emmc_appsboot.mbn
Process : custom : custom.img
SPImage : Process custom_a_0
SPImage : Process custom_b_0
Process : splash : splash.img

OP : Update

Process : boot : boot.img
Process : dtbo : dtbo.img
Process : system : system.img
SPImage : Process system_a_0
SPImage : Process system_a_1
SPImage : Process system_a_2
SPImage : Process system_a_3
SPImage : Process system_a_4
SPImage : Process system_b_0
SPImage : Process system_b_1
SPImage : Process system_b_2
SPImage : Process system_b_3
SPImage : Process system_b_4
Process : vbmeta : vbmeta.img
Process : vendor : vendor.img
SPImage : Process vendor_a_0
SPImage : Process vendor_b_0

OP : Post


OP : UserData preserve : disabled
Process : userdata : userdata.img
SPImage : Process userdata_0

OP : Reset FRP
Reset FRP Ok!

Done!
Elapsed: 00:16:43

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to bellosule For This Useful Post:
Old 11-07-2019, 08:20   #949 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,910
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 592
Nokia 105 format done

Operation : Reset Settings [ v1.18 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM254)
MODE : NOKIA USB SERIAL
PORT : 254
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : D0C28BAC68D5090E4F0EC9C264BAB040
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : KESA61A.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : KESA61A.10.00.11.p2
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0060 : 0017 : 0000
NOR: [WINBOND] W25Q64DW
NOR:
TSIZE : 0x00800000 [ 8.00 MB ]
PSIZE : 0x00800000 [ 8.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00580000 : 0x00278000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:02:12

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 11-08-2019, 14:32   #950 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,708
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,553
Smile Nokia 130 Format Done

Operation : Reset Settings [ v1.18 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM254)
MODE : NOKIA USB SERIAL
PORT : 254
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : DCAAE6A22DACA74B02818B3B8D1DFC45
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : KESA61A.30.00.11.p1
BOOT : SWR : 30.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : KESA61A.30.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0060 : 0017 : 0000
NOR: [WINBOND] W25Q64DW
NOR:
TSIZE : 0x00800000 [ 8.00 MB ]
PSIZE : 0x00800000 [ 8.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00580000 : 0x00278000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Akhtar Ali Jatt For This Useful Post:
Old 11-11-2019, 13:52   #951 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,910
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 592
Nokia 215 format done

Operation : Reset Settings [ v1.18 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM254)
MODE : NOKIA USB SERIAL
PORT : 254
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 08481E945F626BF993CFB71733AB47CF
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : JET.12.03.11.p1
BOOT : SWR : 12.03.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : JET.12.03.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00C2 : 0025 : 0038 : 0000
NOR: [MXIC] MX25U12835FZNI_10G
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00E80000 : 0x00174000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 11-13-2019, 13:31   #952 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,708
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,553
Nokia 105 Use Code Reset Done
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 254 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : D4596FCB9A0F311AA9C8E9B6B04784A4
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...
  Reply With Quote
The Following User Says Thank You to Akhtar Ali Jatt For This Useful Post:
Old 11-13-2019, 14:15   #953 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,910
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 592
Qmobile s2 pro frp reset done

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM264)
MODE : PRELOADER PORT
PORT : 264
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D323238E305004225138BAA
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100463832324D420005E3AA8B1325
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : F822MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : FC37D4B8F7F469DC1A6B94F19B27D2D4

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 11-14-2019, 10:50   #954 (permalink)
Junior Member
 
Join Date: Nov 2019
Location: Narowal
Posts: 35
Member: 2935044
Status: Offline
Thanks Meter: 6
Nokia 1 PLUS TA-1130 FRP Reset Done By 1 Click With BEST2

Nokia 1 PLUS TA-1130 FRP Reset Done By 1 Click With BEST2

Here are Logs



Youtube Link

https://www.youtube.com/watch?v=USqKLAoj6_4
  Reply With Quote
The Following User Says Thank You to AAdnan Mobile For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 21:39.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.24965 seconds with 8 queries

SEO by vBSEO