GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 01-10-2020, 04:39   #991 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,190
Member: 2556542
Status: Online
Thanks Meter: 912
Nokia rm-1034 hang on logo done by flashing


Code:
Operation : Write FirmWare [ v1.19 ]
Setting   : UserData erase : False
Setting   : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 6D85F20D97C897FD149CE30F505A81F7
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.30.04.11.p1
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00C8 : 0060 : 0016 : 0000
        NOR: [GigaDevice] GD25LQ32
        NOR: 
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion   : 10.02.11 [TA-1034]
DEV SoftwareVersion   : 30.04.11
SWInfo compare result : VPL SW ( Major version ) is LOWER, than in DEVICE!

Load FlashSet : 
MROM : TA-1034_ROM_eMP_10.02.11
LANG : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
CUST : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
JUMP : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
VIVA : TA-1034_VIVA_eMP_10.02.11

Prepare FlashSet : 
DCR : TA-1034_ROM_eMP_10.02.11
DCR : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
DCR : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
DCR : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
DCR : TA-1034_VIVA_eMP_10.02.11

Prepare Target 
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash 
Erase done!

Write Target Flash
Write : TA-1034_ROM_eMP_10.02.11
Write : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
Write : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
Write : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
Write : TA-1034_VIVA_eMP_10.02.11
Write done, waiting target response ... 
Write flash done!

Verify Target FlashContent
Verify : TA-1034_ROM_eMP_10.02.11
Verify : TA-1034_LANG_PACK_ROM_MS_eMP_10.02.11_001
Verify : TA-1034_CUSTPACK_ROM_MS_eMP_10.02.11_001
Verify : TA-1034_JUMP_TABLE_MS_eMP_10.02.11_001
Verify : TA-1034_VIVA_eMP_10.02.11

Done!
Elapsed: 00:01:18

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to kothamamun For This Useful Post:
Old 01-10-2020, 07:48   #992 (permalink)
No Life Poster
 
YMS-RYK's Avatar
 
Join Date: Jan 2011
Posts: 1,059
Member: 1489718
Status: Offline
Sonork: 100.1652829 QQ 3237590752
Thanks Meter: 1,477
nokia 110 Hmd ta-1192 6531efm read password done

big thanks best2 team
Code:
Operation : Read UserCode [ v1.20 ]

1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SW_VER  : 21.00.17.02
LP_VER  : IJ 23NKL74PK00

UserCode : 45678

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!
  Reply With Quote
The Following 3 Users Say Thank You to YMS-RYK For This Useful Post:
Show/Hide list of the thanked
Old 01-10-2020, 10:07   #993 (permalink)
No Life Poster
 
Join Date: Mar 2008
Location: @ blacksheep digital
Posts: 602
Member: 731353
Status: Offline
Thanks Meter: 171
VODAFONE smart kicka 5 NETWORK DONE

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM (Android) (COM235)
MODE : PRELOADER PORT
PORT : 235
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : blacksheep.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 4500017041493848711F01347B46EBEB
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 700100454838494134011F71EBEB467B
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EH8IA4
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1C8000000 [ 7.13 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 308609D826B69118D0ECA755AFD97322

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-08-05
Build Time : 1568171595
Product Model : Kicka 5
Product Brand : MobiWire
Product Name : Kicka_5
Product Device : Kicka_5
Product Manfct : MobiWire
Product Info : k80hd_bsp_fwv_512m
Board Platform : mt6580
Product Board : VP506_Mobiwire_Kicka5

USERDATA : ENCRYPTED

Card found : 6EF5F8E0 , v0138
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.06

Load IDBase v124106 Ok!

Update configuration ...
Error connecting with SSL.
EOF was observed that violates the protocol
Update failed! Check settings and/or internet connection!

Operation : SP Unlock [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM (Android) (COM235)
MODE : PRELOADER PORT
PORT : 235
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : blacksheep.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 4500017041493848711F01347B46EBEB
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 700100454838494134011F71EBEB467B
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EH8IA4
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1C8000000 [ 7.13 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 308609D826B69118D0ECA755AFD97322

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

ID0 : Lock : Locked! | MNC : 512 | CNT : 214 | CODE : 12345678
ID1 : Lock : Not Locked!
ID2 : Lock : Not Locked!
ID3 : Lock : Not Locked!
ID4 : Lock : Not Locked!
ID5 : Lock : Not Locked!
ID6 : Lock : Not Locked!


Direct unlock done!


Done!
Elapsed: 00:00:55
  Reply With Quote
The Following 2 Users Say Thank You to bigjef1 For This Useful Post:
Old 01-10-2020, 10:41   #994 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,934
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 608
Nokia 210 read user code done

Operation : Read UserCode [ v1.20 ]

1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SW_VER : 21.00.17.02
LP_VER : IJ 23NKL74PK00

UserCode : 963214

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to Luckey1 For This Useful Post:
Old 01-11-2020, 12:18   #995 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,910
Member: 2644066
Status: Offline
Thanks Meter: 924
Nokia 105 rm-1133 reset password done by best2


Card found : 30C22462 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20


Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : BCD567AE8615D104DFB4ED28B388D6EB
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : LAGOS61D.15.00.11.p1
BOOT : SWR : 15.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : LAGOS61D.15.00.11.p1
FLASH : 00C2 : 0025 : 0036 : 0000
BBSN : BCD567AE8615D104DFB4ED28B388D6EB
PRDC : 059W9Z8
IMEI[1] : 3572990xxxxxxxx
IMEI[2] : 3572990xxxxxxxx
NCK : 20 digits
PROV : 24407000

Saved as : 3572990xxxxxxxx.mtsec
Saved to : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:59

Reconnect Power/Cable!

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : BCD567AE8615D104DFB4ED28B388D6EB
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : LAGOS61D.15.00.11.p1
BOOT : SWR : 15.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : LAGOS61D.15.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00368000 : 0x00090000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to A.G.Shahid For This Useful Post:
Old 01-11-2020, 12:22   #996 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,910
Member: 2644066
Status: Offline
Thanks Meter: 924
Nokia 150 hang on logo done by best2


Card found : 30C22462 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20


Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 45BF3AAB276B63A9C9E0FE82CE17E970
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DUBAI61D.30.00.11.p1
BOOT : SWR : 30.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : DUBAI61D.30.00.11.p1
FLASH : 00C2 : 0025 : 0036 : 0000
BBSN : 45BF3AAB276B63A9C9E0FE82CE17E970
PRDC : 059X8W6
IMEI[1] : 357345081xxxxxx
IMEI[2] : 357325086xxxxxx
NCK : 20 digits
PROV : 24407000

Saved as : 357345081xxxxxx.mtsec
Saved to : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:59

Reconnect Power/Cable!

Open VPLfile : RM1190_059X8W6_30.00.11.vpl
Description : RM-1190 NDT MEA IJ BLACK URDU PK
DeviceType : RM-1190
ProductCode : 059X8W6
SoftwareVer : 30.00.11
PPM LangPack :
[1] : Urdu (Islamic Republic of Pakistan)
[2] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : False
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 45BF3AAB276B63A9C9E0FE82CE17E970
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DUBAI61D.30.00.11.p1
BOOT : SWR : 30.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : DUBAI61D.30.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 30.00.11 [RM-1190]
DEV SoftwareVersion : 30.00.11
SWInfo compare result : SAME

Load FlashSet :
MROM : RM-1190_ROM_eMP_30.00.11
LANG : RM-1190_LANG_PACK_ROM_IJ_eMP_30.00.11_001
CUST : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.00.11_001
JUMP : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_30.00.11_001
VIVA : RM-1190_VIVA_eMP_30.00.11

Prepare FlashSet :
DCR : RM-1190_ROM_eMP_30.00.11
DCR : RM-1190_LANG_PACK_ROM_IJ_eMP_30.00.11_001
DCR : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.00.11_001
DCR : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_30.00.11_001
DCR : RM-1190_VIVA_eMP_30.00.11

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : RM-1190_ROM_eMP_30.00.11
Write : RM-1190_LANG_PACK_ROM_IJ_eMP_30.00.11_001
Write : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.00.11_001
Write : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_30.00.11_001
Write : RM-1190_VIVA_eMP_30.00.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : RM-1190_ROM_eMP_30.00.11
Verify : RM-1190_LANG_PACK_ROM_IJ_eMP_30.00.11_001
Verify : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.00.11_001
Verify : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_30.00.11_001
Verify : RM-1190_VIVA_eMP_30.00.11

Done!
Elapsed: 00:01:07

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to A.G.Shahid For This Useful Post:
Old 01-14-2020, 10:35   #997 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,190
Member: 2556542
Status: Online
Thanks Meter: 912
Nokia ta-1139 identify,password remove and firmware backup done

Code:
Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0D2C69BB3CE3E5DD4BB2E261A06A6840
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : OUTRUN.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
PRDC : 059Z0X8
IMEI[1] : 357704109543435
IMEI[2] : 357704109983433
NCK  : 20 digits
PROV : 24407000

Saved as  : 357704109543435.mtsec
Saved to  : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:28

Reconnect Power/Cable!
Code:
Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0D2C69BB3CE3E5DD4BB2E261A06A6840
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : OUTRUN.10.01.11.p1
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

        NOR: 00C8 : 0060 : 0018 : 0000
        NOR: [GigaDevice] GD25LQ128
        NOR: 
              TSIZE  : 0x01000000 [ 16.00 MB ]
              PSIZE  : 0x01000000 [ 16.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_NOT_SUPPORT

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00C40000  :  0x003B4000
FFS Format ... 
FFS Format Ok!

Done!
Elapsed: 00:00:32

Reconnect Power/Cable!
Code:
Operation : Read FirmWare [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM39)
MODE : NOKIA USB SERIAL
PORT : 39
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0D2C69BB3CE3E5DD4BB2E261A06A6840
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : OUTRUN.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
CODE  : 0x00C40000
Reading Flash ... 
TDSN : TA-1139
PRDC : 059Z0X8
PPM  : MD
LANG : 
[1] : Malay (Malaysia)
[2] : Indonesian (Indonesia)
[3] : Chinese (S)
[4] : English (United Kingdom)

BUILD : TA-1139_ROM_eMP_10.01.11
BUILD : TA-1139_LANG_PACK_ROM_MD_eMP_10.01.11_001
BUILD : TA-1139_CUSTPACK_ROM_MD_eMP_10.01.11_001
BUILD : TA-1139_JUMP_TABLE_MD_eMP_10.01.11_001
BUILD : TA-1139_VIVA_eMP_10.01.11

Make VPL definition

Save Path : D:\Nokia Flash file\TA-1139\
Save Name : TA-1139_059Z0X8_10.01.11.vpl

Build Finished!

Done!
Elapsed: 00:05:58

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to kothamamun For This Useful Post:
Old 01-16-2020, 07:53   #998 (permalink)
Insane Poster
 
Join Date: Nov 2019
Location: Narowal
Posts: 80
Member: 2935044
Status: Offline
Thanks Meter: 46
Nokia 106 TA-1114 Pin Code Reset Done Infinity-Box [BEST] NK2

Nokia 106 TA-1114 Pin Code Reset Done Infinity-Box [BEST] NK2

Here are Logs



Youtube Link

https://www.youtube.com/watch?v=EPsIOuMygNo
  Reply With Quote
The Following User Says Thank You to AAdnan Mobile For This Useful Post:
Old 01-16-2020, 07:55   #999 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,841
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,737
Smile Nokia 210 HMD Global Read User Code Done

Operation : Read UserCode [ v1.20 ]

1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SW_VER : 21.00.17.02
LP_VER : IJ 23NKL74PK00

UserCode : 26795

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!
  Reply With Quote
Old 01-16-2020, 11:28   #1000 (permalink)
No Life Poster
 
naveed ali's Avatar
 
Join Date: Mar 2008
Posts: 870
Member: 720264
Status: Offline
Sonork: 100.1649278
Thanks Meter: 170
Nokia 220 [ TA-1155 ] Format Done

Operation : Reset Settings ( Format FS ) [ v1.20 ]

Extra : FTM mode
1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Erase BLK #0

Format Ok!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!


GSMdunya!
  Reply With Quote
The Following User Says Thank You to naveed ali For This Useful Post:
Old 01-17-2020, 12:26   #1001 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,910
Member: 2644066
Status: Offline
Thanks Meter: 924
Nokia 106 ta 1114 reset password & read flash file done by best2

Card found : 30C22462 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20


Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 4B9B9630061D9CFC3DC3A27DB42C63D6
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : NEMO61D.10.00.11.p2
FLASH : 00C2 : 0025 : 0036 : 0000
PRDC : 059Z0X8
IMEI[1] : 354189xxxxxxxxx
IMEI[2] : 354189xxxxxxxxx
NCK : 20 digits
PROV : 24407000

Saved as : 354189xxxxxxxxx.mtsec
Saved to : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:01:11

Reconnect Power/Cable!

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 4B9B9630061D9CFC3DC3A27DB42C63D6
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C8 : 0060 : 0016 : 0000
NOR: [GigaDevice] GD25LQ32
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00370000 : 0x00088000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!

Operation : Read FirmWare [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 4B9B9630061D9CFC3DC3A27DB42C63D6
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : NEMO61D.10.00.11.p2
FLASH : 00C2 : 0025 : 0036 : 0000
CODE : 0x00370000
Reading Flash ...
TDSN : TA-1114
PRDC : 059Z0X8
PPM : IJ
LANG :
[1] : Urdu (Islamic Republic of Pakistan)
[2] : English (United Kingdom)

BUILD : TA-1114_ROM_eMP_10.00.11
BUILD : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
BUILD : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
BUILD : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001
BUILD : TA-1114_VIVA_eMP_10.00.11

Make VPL definition

Save Path : C:\InfinityBox\BEST2\TA-1114\
Save Name : TA-1114_059Z0X8_10.00.11.vpl

Build Finished!

Done!
Elapsed: 00:06:02

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Old 01-19-2020, 13:28   #1002 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,934
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 608
Nokia 105 format done

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM254)
MODE : NOKIA USB SERIAL
PORT : 254
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 33D3C6928D098C9C4DAA12BC845CD648
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.10.02.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C2 : 0020 : 0016 : 0000
NOR: [MXIC] MX25L3291FWJI_09
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00370000 : 0x00088000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 01-21-2020, 11:50   #1003 (permalink)
No Life Poster
 
Arslanmayo's Avatar
 
Join Date: Oct 2015
Location: Pakistan
Posts: 1,064
Member: 2478233
Status: Offline
Thanks Meter: 264
nokia ta-1174 format done

Infinity-Box BEST Nokia [HMD] Module [NK2] v1.19


Operation : Reset Settings ( Format FS ) [ v1.19 ]

1. Power off device, remove battery
2. Insert cable, press and hold BootKey ( # )
3. Insert battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Reset Settings ( Format FS ) [ v1.19 ]

Extra : FTM mode
1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Erase BLK #0

Format Ok!

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
  Reply With Quote
The Following 3 Users Say Thank You to Arslanmayo For This Useful Post:
Show/Hide list of the thanked
Old 01-21-2020, 12:34   #1004 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,934
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 608
Nokia 150 format done

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM306)
MODE : NOKIA USB SERIAL
PORT : 306
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : A05B11C13ACD1FDEEC65B7314833FFED
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DUBAI61D.11.00.11.p1
BOOT : SWR : 11.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : DUBAI61D.11.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x003A0000 : 0x00058000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:03:46

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old Yesterday, 13:47   #1005 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,910
Member: 2644066
Status: Offline
Thanks Meter: 924
Nokia 105 ta 1034 reset password done by best2


Card found : 30C22462 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20


Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 84FE7F530E020CF53DA6F720FC718925
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.11.00.11.p1
BOOT : SWR : 11.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : N103.11.00.11.p1
FLASH : 00C2 : 0025 : 0036 : 0000
BBSN : 84FE7F530E020CF53DA6F720FC718925
PRDC : 059Z105
IMEI[1] :
IMEI[2] :
NCK : 20 digits
PROV : 24407000

Saved as : xxxxxxxxxxxxxxx.mtsec
Saved to : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:58

Reconnect Power/Cable!

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 84FE7F530E020CF53DA6F720FC718925
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.11.00.11.p1
BOOT : SWR : 11.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.11.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00370000 : 0x00088000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 13:34.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.29824 seconds with 8 queries

SEO by vBSEO