GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 01-26-2020, 12:40   #1036 (permalink)
Junior Member
 
Join Date: Dec 2016
Location: Dark web !!!
Age: 27
Posts: 22
Member: 2659213
Status: Offline
Thanks Meter: 12

Operation : Reset Settings ( Format FS ) [ v1.16 ]

1. Power off device, remove battery
2. Insert cable, press and hold BootKey ( # )
3. Insert battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD SECURE BOOT Block version
BootVersion : BEST RETRO3G
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

Erase BLK #0
Erase BLK #1
Erase BLK #2
Erase BLK #3

Format Ok!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Gsm Xlocker For This Useful Post:
Old 01-27-2020, 05:24   #1037 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Nokia 150 flash done with best

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1190_DUBAI_ROM_eMP_30.00.11
VIVA : RM-1190_DUBAI_VIVA_eMP_30.00.11
LANG : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
CUST : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
JMPT : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 188F942C1CB5837D4FC61728D5B339B1
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.11.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
SecureDecrypt : RM-1190_DUBAI_ROM_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_VIVA_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : DUBAI61D.11.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1190_DUBAI_ROM_eMP_30.00.11
Write : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1190_DUBAI_ROM_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time : 00:00:50
Reboot phone Ok

ReadInfo can't be done! Re-insert battery and power up phone manually
  Reply With Quote
The Following User Says Thank You to Nadeem Waris For This Useful Post:
Old 01-27-2020, 05:25   #1038 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Nokia 225 flash done with best

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1011_ROM_eMP_30.06.11
VIVA : RM-1011_VIVA_eMP_30.06.11
LANG : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
CUST : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
JMPT : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 59 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 66B8FF4EA6030A86FBBC08D0373272D8
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_30.06.11
SecureDecrypt : RM-1011_VIVA_eMP_30.06.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
SecureDecrypt : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
SecureDecrypt : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
OVRLP : 000069B900000001
PHPID : PEARL.20.10.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_30.06.11
Write : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
Write : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-1011_VIVA_eMP_30.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_30.06.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_VIVA_eMP_30.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:39
Reboot phone Ok
  Reply With Quote
The Following User Says Thank You to Nadeem Waris For This Useful Post:
Old 01-27-2020, 05:27   #1039 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
nokia flash done

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1011_ROM_eMP_21.00.11
VIVA : RM-1011_VIVA_eMP_21.00.11
LANG : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
CUST : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
JMPT : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 66B8FF4EA6030A86FBBC08D0373272D8
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.30.06.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_21.00.11
SecureDecrypt : RM-1011_VIVA_eMP_21.00.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
SecureDecrypt : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
SecureDecrypt : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
OVRLP : 000069B900000001
PHPID : PEARL.30.06.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_21.00.11
Write : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
Write : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
Write : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
Write : RM-1011_VIVA_eMP_21.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_21.00.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
[VERIFY] DONE : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
[VERIFY] DONE : RM-1011_VIVA_eMP_21.00.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:51
Reboot phone Ok
  Reply With Quote
The Following User Says Thank You to Nadeem Waris For This Useful Post:
Old 01-27-2020, 05:29   #1040 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Nokia rm1190 flash done

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1190_DUBAI_ROM_eMP_30.00.11
VIVA : RM-1190_DUBAI_VIVA_eMP_30.00.11
LANG : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
CUST : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
JMPT : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : BEC82E2EC0288416885EA4C64D29FDB3
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.30.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
SecureDecrypt : RM-1190_DUBAI_ROM_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_VIVA_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : DUBAI61D.30.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1190_DUBAI_ROM_eMP_30.00.11
Write : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1190_DUBAI_ROM_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time : 00:00:50
Reboot phone Ok
  Reply With Quote
The Following User Says Thank You to Nadeem Waris For This Useful Post:
Old 01-28-2020, 05:32   #1041 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 12 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : D74D92EB9791C01DCF1EC48A3E7738B1
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.30.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000

Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Elapsed: 00:00:17
Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to Nadeem Waris For This Useful Post:
Old 01-28-2020, 08:08   #1042 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: Infinity Team
Posts: 234
Member: 2072265
Status: Offline
Thanks Meter: 46
Core : v2.28 , MTKx FlashEngine : v12.0

Verify files ...
MAUI : RM-944_ROM_eMP_20.06.11
VIVA : RM-944_VIVA_eMP_20.06.11
LANG : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
CUST : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
JMPT : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 8E1E187A9EA6EC6547E113F997AB5FFD
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_20.06.11
SecureDecrypt : RM-944_VIVA_eMP_20.06.11
SecureDecrypt : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
SecureDecrypt : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
OVRLP : 000069B900000001
PHPID : Bree.20.06.11.p4
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-944_ROM_eMP_20.06.11
Write : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
Write : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_VIVA_eMP_20.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-944_ROM_eMP_20.06.11
[VERIFY] DONE : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
[VERIFY] DONE : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_VIVA_eMP_20.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:00:58
Reboot phone Ok

Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to SAGAR NADEEM For This Useful Post:
Old 01-29-2020, 12:50   #1043 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,961
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 622
Nokia 230 format done

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM306)
MODE : NOKIA USB SERIAL
PORT : 306
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 032D8E7DBA8638F91DAB9C033EFC2C3B
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DOHA.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : DOHA.10.01.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00C2 : 0025 : 0038 : 0000
NOR: [MXIC] MX25U12835FZNI_10G
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00DC0000 : 0x00234000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:37

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to Luckey1 For This Useful Post:
Old 02-01-2020, 07:34   #1044 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Nokia 210 flashing done with best

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM34)
MODE : NOKIA USB SERIAL
PORT : 34
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 7D5E20F013B5C88B7E443907051ABA38
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : OUTRUN.10.01.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00EF : 0060 : 0018 : 0000
NOR: [WINBOND] W25Q128FW
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.01.11 [TA-1139]
DEV SoftwareVersion : 10.01.11
SWInfo compare result : SAME

Load FlashSet :
MROM : TA-1139_ROM_eMP_10.01.11
LANG : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
JUMP : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
VIVA : TA-1139_VIVA_eMP_10.01.11

Prepare FlashSet :
DCR : TA-1139_ROM_eMP_10.01.11
DCR : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
DCR : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
DCR : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
DCR : TA-1139_VIVA_eMP_10.01.11

Prepare Target
SDS : OK : 0x00FF4000 : 0x0000C000
FFS Format Ok!

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1139_ROM_eMP_10.01.11
Write : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
Write : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
Write : TA-1139_VIVA_eMP_10.01.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1139_ROM_eMP_10.01.11
Verify : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Verify : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
Verify : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
Verify : TA-1139_VIVA_eMP_10.01.11

Done!
Elapsed: 00:02:45

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Nadeem Waris For This Useful Post:
Old 02-01-2020, 08:34   #1045 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,961
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 622
Rm-1190

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM254)
MODE : NOKIA USB SERIAL
PORT : 254
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0257C77F41E26B3408BA6B00FF1FA142
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DUBAI61D.11.00.11.p1
BOOT : SWR : 11.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : DUBAI61D.11.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 11.00.11 [RM-1190]
DEV SoftwareVersion : 11.00.11
SWInfo compare result : SAME

Load FlashSet :
MROM : RM-1190_DUBAI_ROM_eMP_11.00.11
LANG : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
CUST : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
JUMP : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
VIVA : RM-1190_DUBAI_VIVA_eMP_11.00.11

Prepare FlashSet :
DCR : RM-1190_DUBAI_ROM_eMP_11.00.11
DCR : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
DCR : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
DCR : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
DCR : RM-1190_DUBAI_VIVA_eMP_11.00.11

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000
FFS Format Ok!

Erase Target Flash
Erase done!

Write Target Flash
Write : RM-1190_DUBAI_ROM_eMP_11.00.11
Write : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_VIVA_eMP_11.00.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : RM-1190_DUBAI_ROM_eMP_11.00.11
Verify : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
Verify : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
Verify : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
Verify :_DUBAI_VIVA_eMP_11.00.11

Done!
Elapsed: 00:01:10

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Old 02-02-2020, 08:19   #1046 (permalink)
No Life Poster
 
pintu_das's Avatar
 
Join Date: Jan 2015
Location: Narsingdi, Dhaka, Bangladesh
Age: 24
Posts: 1,843
Member: 2325851
Status: Offline
Sonork: 100.1680491
Thanks Meter: 1,846
Donate money to this user
nokia 5.1 plus frp remove done

Card found : ADCE8487 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20


Operation : Identify [FTM] [ v1.20 ]

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear

Wait for phone...
Connect Ok!
Device Found!
Initialize ...
Initialize Ok!

Dev Model : PDA
HW RF_BAND : G_850_900_1800_1900^W_1_5_8^L_1_3_5_7_8_20_28_38
SW version : PDA-220A-0-00WW-B02
SW CurrSlot : _A
SW serialnm : PDAGAA6884103899
SW secured : YES
Project DevCode : PDA1
Bootloader type : RETAIL
Security Version : 0004

Done!
Elapsed: 00:00:05

Reconnect Power/Cable!

Operation : Reset Settings [FTM] [ v1.20 ]

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear

Wait for phone...
Connect Ok!
Device Found!
Initialize ...
Initialize Ok!

Info : Model supported standalone in Nokia MTK [SP] tab!

Break by user !
Check previous message for more info!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
- > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY+DEV_ARB
BROM : BOOTROM
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SOCID : 5E06F74AF2BF23FE93D323E30E170B70E477378A64A63F43BB A565D16AF44724
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6771
AGENT : BEST_Nokia_DA_v19_1711_06
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A68423861503E0167145086555
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 4C95909CF7DD5675CCEC85166FC152C1

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to pintu_das For This Useful Post:
Old 02-03-2020, 05:18   #1047 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,285
Member: 2556542
Status: Offline
Thanks Meter: 1,018
Nokia 106 ta-1114 hang on logo and read bangla flash done

Code:
Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM50)
MODE : NOKIA USB SERIAL
PORT : 50
BROM : Init BROM
BROM init passed!
     CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : BDF122A3D1C6C5605B4586661AE324B7
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00C8 : 0060 : 0016 : 0000
        NOR: [GigaDevice] GD25LQ32
        NOR: 
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00370000  :  0x00088000
FFS Format ... 
FFS Format Ok!

Done!
Elapsed: 00:01:19

Reconnect Power/Cable!
Code:
Operation : Read FirmWare [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM50)
MODE : NOKIA USB SERIAL
PORT : 50
BROM : Init BROM
BROM init passed!
     CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : BDF122A3D1C6C5605B4586661AE324B7
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : NEMO61D.10.00.11.p2
FLASH : 00C2 : 0025 : 0036 : 0000
CODE  : 0x00370000
Reading Flash ... 
TDSN : TA-1114
PRDC : 059Z0X8
PPM  : MS
LANG : 
[1] : English (United Kingdom)

BUILD : TA-1114_ROM_eMP_10.00.11
BUILD : TA-1114_LANG_PACK_ROM_MS_eMP_10.00.11_001
BUILD : TA-1114_CUSTPACK_ROM_MS_eMP_10.00.11_001
BUILD : TA-1114_JUMP_TABLE_MS_eMP_10.00.11_001
BUILD : TA-1114_VIVA_eMP_10.00.11

Make VPL definition

Save Path : D:\Nokia Flash file\TA-1114\
Save Name : TA-1114_059Z0X8_10.00.11.vpl

Build Finished!

Done!
Elapsed: 00:02:20

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to kothamamun For This Useful Post:
Old 02-04-2020, 04:55   #1048 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: Liton,KALAROA,SATKHIRA
Posts: 2,285
Member: 2556542
Status: Offline
Thanks Meter: 1,018
nokia ram-1190 contact service done

Code:
Open VPLfile : RM-1190_059X992_30.00.11.vpl
Description  : RM-1190 MD
DeviceType   : RM-1190
ProductCode  : 059X992
SoftwareVer  : 30.00.11
PPM LangPack : 
[1] : Malay (Malaysia)
[2] : Indonesian (Indonesia)
[3] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.20 ]
Setting   : UserData erase : False
Setting   : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM50)
MODE : NOKIA USB SERIAL
PORT : 50
BROM : Init BROM
BROM init passed!
     CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 9A5D8DB19F849098DE119369E3F2DF91
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : DUBAI61D.10.02.11.p1
BOOT : SWR : 10.02.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : DUBAI61D.10.02.11.p1
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00EF : 0070 : 0016 : 0000
        NOR: [Winbond] SF_W25Q32JV
        NOR: 
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion   : 30.00.11 [RM-1190]
DEV SoftwareVersion   : 10.02.11
SWInfo compare result : DEVICE SW ( Major version ) is LOWER, than in VPL!

Load FlashSet : 
MROM : RM-1190_ROM_eMP_30.00.11
LANG : RM-1190_LANG_PACK_ROM_MD_eMP_30.00.11_001
CUST : RM-1190_CUSTPACK_ROM_MD_eMP_30.00.11_001
JUMP : RM-1190_JUMP_TABLE_MD_eMP_30.00.11_001
VIVA : RM-1190_VIVA_eMP_30.00.11

Prepare FlashSet : 
DCR : RM-1190_ROM_eMP_30.00.11
DCR : RM-1190_LANG_PACK_ROM_MD_eMP_30.00.11_001
DCR : RM-1190_CUSTPACK_ROM_MD_eMP_30.00.11_001
DCR : RM-1190_JUMP_TABLE_MD_eMP_30.00.11_001
DCR : RM-1190_VIVA_eMP_30.00.11

Prepare Target 
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash 
Erase done!

Write Target Flash
Write : RM-1190_ROM_eMP_30.00.11
Write : RM-1190_LANG_PACK_ROM_MD_eMP_30.00.11_001
Write : RM-1190_CUSTPACK_ROM_MD_eMP_30.00.11_001
Write : RM-1190_JUMP_TABLE_MD_eMP_30.00.11_001
Write : RM-1190_VIVA_eMP_30.00.11
Write done, waiting target response ... 
Write flash done!

Verify Target FlashContent
Verify : RM-1190_ROM_eMP_30.00.11
Verify : RM-1190_LANG_PACK_ROM_MD_eMP_30.00.11_001
Verify : RM-1190_CUSTPACK_ROM_MD_eMP_30.00.11_001
Verify : RM-1190_JUMP_TABLE_MD_eMP_30.00.11_001
Verify : RM-1190_VIVA_eMP_30.00.11

Done!
Elapsed: 00:01:35

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to kothamamun For This Useful Post:
Old 02-04-2020, 08:08   #1049 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,895
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,818
Smile Nokia 106 TA-1114 Format & Read Firmware Done

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM306)
MODE : NOKIA USB SERIAL
PORT : 306
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 390447282B7E830E4B6F4280D637EE36
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C8 : 0060 : 0016 : 0000
NOR: [GigaDevice] GD25LQ32
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00370000 : 0x00088000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!

Operation : Read FirmWare [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM306)
MODE : NOKIA USB SERIAL
PORT : 306
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 390447282B7E830E4B6F4280D637EE36
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : NEMO61D.10.00.11.p2
FLASH : 00C2 : 0025 : 0036 : 0000
CODE : 0x00370000
Reading Flash ...
TDSN : TA-1114
PRDC : 059Z0X8
PPM : IB
LANG :
[1] : Portuguese (Portugal)
[2] : French (France)
[3] : Spanish (Castilian/Spain)
[4] : English (United Kingdom)

BUILD : TA-1114_ROM_eMP_10.00.11
BUILD : TA-1114_LANG_PACK_ROM_IB_eMP_10.00.11_001
BUILD : TA-1114_CUSTPACK_ROM_IB_eMP_10.00.11_001
BUILD : TA-1114_JUMP_TABLE_IB_eMP_10.00.11_001
BUILD : TA-1114_VIVA_eMP_10.00.11

Make VPL definition

Save Path : C:\Program Files (x86)\Nokia\Phoenix\Products\TA-1114\
Save Name : TA-1114_059Z0X8_10.00.11.vpl

Build Finished!

Done!
Elapsed: 00:06:04

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Akhtar Ali Jatt For This Useful Post:
Old 02-04-2020, 09:11   #1050 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,961
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 622
Nokia 112

Nokia 112 flashing done

Quote:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm837__03.51.mcusw
PPM : rm837__03.51.ppm_m2
CNT : rm837__03.51.image_m2_059P7C1
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.50_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 359984055117925
IMEI 2 : 359984055117933
PCcode : 059P794

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\359984055117925_XG 213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm837__03.51.mcusw
Image : rm837__03.51.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:00:51
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:33
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0x87F4

===Flashing [PPM]===
File : rm837__03.51.ppm_m2
Image : package_m2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:06
Write , Start : 0x41BC0000 , Len : 0x0030F7C0
Flashing , wait ...
Region flash done, time : 00:00:03
CRC check passed , 0x46E6

===Flashing [CNT]===
File : rm837__03.51.image_m2_059P7C1
Image : package_m2_059P7C1.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:01:11
Write , Start : 0x421C0000 , Len : 0x00EE0000
Flashing , wait ...
Region flash done, time : 00:00:18
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip
CRC check passed , 0x2559

Flashing done!
Total flash time : 00:03:12
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 112
Software Info: V 03.51 06-08-13 RM-837 (c) Nokia
IMEI: 359984055117925
PPM version : V 03.51 06-08-13 RM-837 (c) Nokia M2
Product code: 059P794
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:00
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok
  Reply With Quote
The Following User Says Thank You to Luckey1 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 16:53.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.62800 seconds with 8 queries

SEO by vBSEO