TA-1011 Frp possible
 

TA-1011 Frp possible ?

Nokia best2 - qualcomm module not activated ..others like mtk FP/SP spd all shows the tab ..but qualcomm module featured are hidden ...is that any activation for this ???

connected with test point /emergency driver too ...

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. Use BOOT JIG or EDL cable!
3. Insert USB cable, press "POWER_ON" button few times, if need

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 066A003A
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 767C99A9BB310D9A13C8898315D4090B
ID_BLOCK_L : 7A4621A3A94A96A1CB8654CF1AEE0720
Use BEST Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!



FRP State : ON ( ACTIVE )

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!

Operation : Reset Settings [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. Use BOOT JIG or EDL cable!
3. Insert USB cable, press "POWER_ON" button few times, if need

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 066A003A
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 767C99A9BB310D9A13C8898315D4090B
ID_BLOCK_L : 7A4621A3A94A96A1CB8654CF1AEE0720
Use BEST Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Additional data remove failed!
Remove FRP
Additional data remove failed!
Remove FRP
Additional data remove failed!

Done!
Elapsed: 00:00:18



Tried with old version ..but not ...

Hi try with 1.10 or 1.11 1.12