c3 spreadtrum chip need good back up pls - GSM-Forum

amar85 · 10-31-2011, 09:33

pls gpgdragon team upload firmware

problem hang on logo

i try to format error

Initializing...
DA_LIB_VER_3.6.7.1
It is sensing the pinout fast...
RXD=21 TXD=18
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00780000, Size=0x00070000, Running NV=0xA81A7900
Error: Unsaft EFS Address, Please input the right format address and try again.
Failed to auto format.

RIZWANJAT · 10-31-2011, 09:37

After reset your problem not solved if no so you need try full flash your phone with same working phone file

amar85 · 10-31-2011, 09:39

successfully reset still hang on logo

pls gpgdragon tead uplload firmware

tia,,,

WestGSM™ · 11-02-2011, 05:32

support pls upload this flashfile on support

10-31-2011, 09:33	#1 (permalink)
amar85 No Life Poster Join Date: Jul 2010 Location: mindanao L-D-S Posts: 1,943 Member: 1339214 Status: Offline Thanks Meter: 514	c3 spreadtrum chip need good back up pls pls gpgdragon team upload firmware problem hang on logo i try to format error Initializing... DA_LIB_VER_3.6.7.1 It is sensing the pinout fast... RXD=21 TXD=18 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6600700100006A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 115200 is ok Reading phone HW info... Read info is done. CPU: SC6600L2 Flash: NOR_TV00560002EDGB setting the Flash Parameters... Settings have been completed! Reading FileSystem info... FileSystem Version: 0A Start=0x00780000, Size=0x00070000, Running NV=0xA81A7900 Error: Unsaft EFS Address, Please input the right format address and try again. Failed to auto format.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

10-31-2011, 09:37	#2 (permalink)
RIZWANJAT Cheater -Don't Deal with him- Join Date: Jun 2009 Location: PAKISTAN/UAE Posts: 6,730 Member: 1050335 Status: Offline Sonork: 100.1602801 Thanks Meter: 4,174	After reset your problem not solved if no so you need try full flash your phone with same working phone file

10-31-2011, 09:39	#3 (permalink)
amar85 No Life Poster Join Date: Jul 2010 Location: mindanao L-D-S Posts: 1,943 Member: 1339214 Status: Offline Thanks Meter: 514	successfully reset still hang on logo pls gpgdragon tead uplload firmware tia,,,

11-02-2011, 05:32	#4 (permalink)
WestGSM™ Freak Poster Join Date: Jan 2010 Location: On UR GF's Azz! Posts: 166 Member: 1219186 Status: Offline Sonork: F_u_c_k_O_f_f Thanks Meter: 19	support pls upload this flashfile on support