china n8 6235 cpu....Solved - GSM-Forum

gsmsikar · 03-22-2011, 16:46

successfully connected and rebuild the imei but unable to read the info and flash file ..

Code:

-------------------Created: 3/22/2011 9:04:45 PM-------------------

Chip=MTK
Action=ReadInfo
FlashType=NOR
boot=Ver3.920
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM9
Baudrate=921600

 Initializing...
 DA_LIB_VER_3.2.0.7
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=4  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Loading boot...
 Failed to send Boot

+++++++++++++++++++End at: 3/22/2011 9:04:55 PM+++++++++++++++++++

-------------------Created: 3/22/2011 9:05:06 PM-------------------

Chip=MTK
Action=ReadInfo
FlashType=NOR
boot=Ver3.920
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM9
Baudrate=921600

 Initializing...
 DA_LIB_VER_3.2.0.7
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=4  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Loading boot...
 Failed to send Boot

+++++++++++++++++++End at: 3/22/2011 9:05:18 PM+++++++++++++++++++

-------------------Created: 3/22/2011 9:11:36 PM-------------------

Chip=MTK
Action=ReadInfo
FlashType=NOR
boot=Ver3.920
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM9
Baudrate=921600

 Initializing...
 DA_LIB_VER_3.2.0.7
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=4  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Loading boot...
 Failed to send Boot

+++++++++++++++++++End at: 3/22/2011 9:11:47 PM+++++++++++++++++++

-------------------Created: 3/22/2011 9:11:51 PM-------------------

Chip=MTK
Action=ReadInfo
FlashType=NOR
boot=Ver3.920
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM9
Baudrate=921600

 Initializing...
 DA_LIB_VER_3.2.0.7
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=4  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Failed to read phone HW info

+++++++++++++++++++End at: 3/22/2011 9:12:09 PM+++++++++++++++++++

-------------------Created: 3/22/2011 9:12:31 PM-------------------

Chip=MTK
Action=IMEI
FlashType=NOR
boot=Ver3.920
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM9
Baudrate=921600

 Initializing...
 DA_LIB_VER_3.2.0.7
 Tip: The phone must be able to power-on normally
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=4  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Read info...ok, Waitting enter meta...
 Connected...can release Power button now, tracking...
 IMEI=352588784335384
 IMEI=135790246811220
 Rebulid IMEI1=353056188589878
 Rebulid IMEI2=353056937967615

+++++++++++++++++++End at: 3/22/2011 9:12:56 PM+++++++++++++++++++

-------------------Created: 3/22/2011 9:13:45 PM-------------------

Chip=MTK
Action=ReadFlash
FlashType=NOR
boot=Ver3.920
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=E:\china flash dragon\n8
Comport=COM9
Baudrate=921600

 Initializing...
 DA_LIB_VER_3.2.0.7
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=4  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Failed to read phone HW info

+++++++++++++++++++End at: 3/22/2011 9:14:03 PM+++++++++++++++++++

rotharo · 03-23-2011, 03:05

Please MTK 6235 you need select nand
and you can use the inram boot read flash
or try 3.1016 boot read flash

armany99 · 03-29-2011, 13:56

hi mate
can u please tell us the pinout u use

Faheem Anjum · 03-29-2011, 14:22

Quote:

Originally Posted by armany99

hi mate
can u please tell us the pinout u use

can you tell me the jack info ?

gsmsikar · 03-31-2011, 10:01

set successfully readed/imei changed

Code:

-------------------Created: 3/31/2011 12:34:55 PM-------------------

Chip=MTK
Action=ReadInfo
FlashType=Nand
boot=InternalRamBoot
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM9
Baudrate=921600

CPU_Type=MT6235
CPU_ID=00000003
NOR_ID=
NOR_Size=
NOR_Name=
NOR_DieCnt=
NAND_ID=009800D100900015
NAND_Size=128MB
NAND_Name=NAND_TC58NVG0S3AFT_2

 Initializing...
 DA_LIB_VER_3.2.0.7
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=21  TXD=22
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Loading boot...
 Boot init completed.
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Reading phone HW info...
 Read info is done.
 BB: MT6235      Flash: NAND_TC58NVG0S3AFT_2
 setting the Flash Parameters...
 Settings have been completed!
 Changing baudrate...
 Set baudrate to 921600 ...ok

+++++++++++++++++++End at: 3/31/2011 12:35:17 PM+++++++++++++++++++

-------------------Created: 3/31/2011 12:36:30 PM-------------------

Chip=MTK
Action=ReadFlash
FlashType=Nand
boot=InternalRamBoot
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=E:\00 china flash dragon\n8 6235 anup
Comport=COM9
Baudrate=921600

CPU_Type=MT6235
CPU_ID=00000003
NOR_ID=
NOR_Size=
NOR_Name=
NOR_DieCnt=
NAND_ID=009800D100900015
NAND_Size=128MB
NAND_Name=NAND_TC58NVG0S3AFT_2

 Initializing...
 DA_LIB_VER_3.2.0.7
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=21  TXD=22
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Loading boot...
 Boot init completed.
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Reading phone HW info...
 Read info is done.
 BB: MT6235      Flash: NAND_TC58NVG0S3AFT_2
 setting the Flash Parameters...
 Settings have been completed!
 Changing baudrate...
 Set baudrate to 921600 ...ok
 Reading Flash...
 All Done.

+++++++++++++++++++End at: 3/31/2011 12:57:24 PM+++++++++++++++++++

-------------------Created: 3/31/2011 1:12:50 PM-------------------

Chip=MTK
Action=IMEI
FlashType=Nand
boot=InternalRamBoot
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=E:\00 china flash dragon\n8 6235 anup
Comport=COM9
Baudrate=921600

 Initializing...
 DA_LIB_VER_3.2.0.7
 Tip: The phone must be able to power-on normally
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=21  TXD=22
 Connecting...Please hold on the POWER key until the red gauge is going...
 BB:6235,    HardwareVer:8A01,    SoftwareVer:8B00
 Read info...ok, Waitting enter meta...
 Connection time out.

+++++++++++++++++++End at: 3/31/2011 1:16:30 PM+++++++++++++++++++

gsmsikar · 04-04-2011, 15:06

i am having a problem in this set , after changing the imei , same problem remains , sim card registration failed ..

y does that happens ?

is there any other method to do this type of sets ?

RIZWANJAT · 04-04-2011, 15:08

Try with another sim if still then you need check with hardware(SIM IC or JACk)

gsmsikar · 04-04-2011, 15:14

i have tried many sim cards
but same problem remains

and this is a new set which was purchased from another country and it was working there then he came to india and in india it is not working ...

its purely a imei problem ....

Faisal_Computer · 04-04-2011, 15:22

1st of all if this mobile just came in india then how could it blocked from Service provider ?
2ndly do you have any method to check is that imei block in india as we do in pakistan ?
if imei changed successfully then there is no chance to show sim card registration failed only and only if mobile imei blocked from Service provider !!
Br
Faisal_Computer

gsmsikar · 04-04-2011, 16:04

is there any difference in mobile imei and that we change with dragon ?
and if any imei is blocked by service provider of a chinese handset , then after changing the imei it should work perfectly ..

i think the way we change the imei of this set does not work ,.,.'
?

gsmsikar · 04-06-2011, 20:01

after changing the IMEI with dragon same sim card card registration failed problem ,
what to do ?

please help ..

rotharo · 04-07-2011, 04:26

try inram boot flash after mobile will dea
now you use the 3.1016 flash again,mobile working 100%

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
any modified dejan 4 amd cpu?	raivenz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	14	01-07-2002 13:26
which manufacturer in China produce good quality with good price?	Chaku	Main Sales Section	4	11-28-2001 11:32
To Dark Lemming (flasher for faster CPU like AMD)	Demon_Ok	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-20-2001 19:11
CPU	phr3ak	Nokia Hardware & Hardware Repair	5	03-05-2001 05:35
CPU in x10/18x series	rookie	Hardware Repair by brands	0	10-26-1999 00:18

03-23-2011, 03:05	#2 (permalink)
rotharo Product Supporter Join Date: Apr 2007 Location: Planet Earth Posts: 835 Member: 487420 Status: Offline Sonork: 1590016 Thanks Meter: 3,202	Please MTK 6235 you need select nand and you can use the inram boot read flash or try 3.1016 boot read flash

03-29-2011, 13:56	#3 (permalink)
armany99 No Life Poster Join Date: Oct 2004 Location: USA Posts: 547 Member: 85637 Status: Offline Sonork: 100.100.529 Thanks Meter: 139	hi mate can u please tell us the pinout u use

04-04-2011, 15:06	#6 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	i am having a problem in this set , after changing the imei , same problem remains , sim card registration failed .. y does that happens ? is there any other method to do this type of sets ?

04-04-2011, 15:08	#7 (permalink)
RIZWANJAT Cheater -Don't Deal with him- Join Date: Jun 2009 Location: PAKISTAN/UAE Posts: 6,730 Member: 1050335 Status: Offline Sonork: 100.1602801 Thanks Meter: 4,174	Try with another sim if still then you need check with hardware(SIM IC or JACk)

04-04-2011, 15:14	#8 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	i have tried many sim cards but same problem remains and this is a new set which was purchased from another country and it was working there then he came to india and in india it is not working ... its purely a imei problem ....

04-04-2011, 15:22	#9 (permalink)
Faisal_Computer No Life Poster Join Date: Jun 2005 Location: Kamalia, Pakistan. Age: 38 Posts: 16,852 Member: 151871 Status: Offline Thanks Meter: 71,421	1st of all if this mobile just came in india then how could it blocked from Service provider ? 2ndly do you have any method to check is that imei block in india as we do in pakistan ? if imei changed successfully then there is no chance to show sim card registration failed only and only if mobile imei blocked from Service provider !! Br Faisal_Computer

04-04-2011, 16:04	#10 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	is there any difference in mobile imei and that we change with dragon ? and if any imei is blocked by service provider of a chinese handset , then after changing the imei it should work perfectly .. i think the way we change the imei of this set does not work ,.,.' ?

04-06-2011, 20:01	#11 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	after changing the IMEI with dragon same sim card card registration failed problem , what to do ? please help ..

04-07-2011, 04:26	#12 (permalink)
rotharo Product Supporter Join Date: Apr 2007 Location: Planet Earth Posts: 835 Member: 487420 Status: Offline Sonork: 1590016 Thanks Meter: 3,202	try inram boot flash after mobile will dea now you use the 3.1016 flash again,mobile working 100%