[Make Report In This Thread ] Latest Update !!! - GSM-Forum

Faheem Anjum · 05-21-2013, 11:32

enjoy the latest update , all test report bugs report only here in this thread

we will try to lost are give you right way to solved the problem

thank you so much

Gsm.Universal · 05-21-2013, 18:23

DRAGON LOVES

samsung GLAXY SIII

br
Gsm Universal

Gsm.Universal · 05-21-2013, 18:26

another beta test repot DRAGOn loves

br

Gsm Universal

bencebacsi · 05-21-2013, 23:32

I always get the following error message. Solution has not been found. Very strange

What I have done:

1. Tried on a desktop and a notebook computer under both Win7 64bit and WinXP 32bit. I also made a fresh WinXP install on the notebook.
2. Tried 8 different handsets: GT-S6010, GT-S6810, Feiting N9300, Feiting A7100, N7100, 808 Smart Phone (an old phone from last september), i9300 S9 and MPI I9082. Some of them became totally bricked after the reading attempt. They can not power on and no USB connection anymore.
3. Tried all spd driver versions available on the net. I have the latest driver installed for Dragon box.
4. Tried all COM port speed settings.
5. Tried with both box firmware versions 1.61 and 1.62
6. Tried connecting by the phones own USB cable with key press, by a patched USB cable (4-5 pins shortcutted) and via Dragon box by pin finding.

I hope I didn't forget anything to mention. I always get the same result with any settings and configuration. My Dragon works well with other CPUs, I use it every day.
The novelty in this new version is that I get those error nessages. In earlier versions the reading (boot) process just simply stopped.
This is a really strange case because earlier (until about two months ago) I could work without any problem with SC6820 CPUs exept the writing process. Formatting is still working but that also can drive a phone to be bricked because the wrong addressing and corrupting the system partition I think.
I don't know what could be happened. If my box is demaged than it shouldn't work with other CPUs and that case shouldn't affect the processes when I connect via PC USB port.

All useful advice are welcome.

EMMC-BOX · 05-22-2013, 15:26

check the driver,after pinfind,the driver name is SCI or SPRD,
if is SPRD,you need re-install the spd driver to SCI port

if not,it will read flash\write flash error

if you can't install the driver to SCI,you can go to C:\windows\system32;
hold the F3 key,input the sprd,get all about the SPRD driver file and del,after del install the SCI driver again,
it will solve

bencebacsi · 05-22-2013, 21:17

I already tried every possible driver setting. Now I tried again to install the SCI port drivers but I still get the same result.
GPGDragon can boot up the phone with the following COM drivers:

SCI General U2S(AT)
SCI Vendor U2S(DIAG)
CMCC AT Interface1
CMCC AT Interface1
SPRD U2S Diag (2 versions with the same number - 2.4.0.27 - but different date)
and all of the above drivers by Lenovo.

I have already tried all of them but I always get the same result. Btw, Spreadtrum's ResearchDownload still can flash the SC6820 phones without any problem.

GPGDragon Help · 05-23-2013, 03:17

Quote:

Originally Posted by bencebacsi

I already tried every possible driver setting. Now I tried again to install the SCI port drivers but I still get the same result.
GPGDragon can boot up the phone with the following COM drivers:

SCI General U2S(AT)
SCI Vendor U2S(DIAG)
CMCC AT Interface1
CMCC AT Interface1
SPRD U2S Diag (2 versions with the same number - 2.4.0.27 - but different date)
and all of the above drivers by Lenovo.

I have already tried all of them but I always get the same result. Btw, Spreadtrum's ResearchDownload still can flash the SC6820 phones without any problem.

my yahoo ID [email protected]

6622622 · 05-23-2013, 06:15

dragon canot detect any spd & mstar phone its real problem @ not found solution already contact faheem anjam but he ask i dont understand this fault

Faheem Anjum · 05-23-2013, 07:25

Quote:

Originally Posted by 6622622

dragon canot detect any spd & mstar phone its real problem @ not found solution already contact faheem anjam but he ask i dont understand this fault

you are face this problem

6622622 · 05-23-2013, 13:23

yes i face this problem

jecams · 05-29-2013, 09:01

HELLO I HAVE SKK MODEL K15

PROBLEM ONLY INPUT PHONE PASSWORD

BUT MY PROBLEM LOGS LIKE THIS

>>> Getting Mobile Connection Info...
VCC Pin:24,
GND Pin:
Signal Pin:15, 16, 17, 18, 19, 20, 21, 22, 23,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:19 D-:17
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM42
Mobile Connection Success...
CPU_ID:MT6260
Hardware Version:8000
Software Version:CA00
>>> Downloading First Boot...
Initialization RAM Error,FUNC boot_init_1
>>> Return DATA Error!!!

GPGDragon Help · 05-30-2013, 08:35

Quote:

Originally Posted by jecams

HELLO I HAVE SKK MODEL K15

PROBLEM ONLY INPUT PHONE PASSWORD

BUT MY PROBLEM LOGS LIKE THIS

>>> Getting Mobile Connection Info...
VCC Pin:24,
GND Pin:
Signal Pin:15, 16, 17, 18, 19, 20, 21, 22, 23,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:19 D-:17
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM42
Mobile Connection Success...
CPU_ID:MT6260
Hardware Version:8000
Software Version:CA00
>>> Downloading First Boot...
Initialization RAM Error,FUNC boot_init_1
>>> Return DATA Error!!!

we are Re-made the MTK 6260 in dragon Last update,please try download 3.24 and check again

chmsc_ELX · 05-30-2013, 10:00

dear dragon there is a problem for CPU booting or finding correct boot..

v3.24 error in finding boot

v3.23A boot detect good

i tried this on CKK 77 FM but even flashing in both GPG dragon version got an error or not start flashing..

jecams · 06-03-2013, 04:10

Quote:

Originally Posted by jecams

HELLO I HAVE SKK MODEL K15

PROBLEM ONLY INPUT PHONE PASSWORD

BUT MY PROBLEM LOGS LIKE THIS

>>> Getting Mobile Connection Info...
VCC Pin:24,
GND Pin:
Signal Pin:15, 16, 17, 18, 19, 20, 21, 22, 23,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:19 D-:17
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM42
Mobile Connection Success...
CPU_ID:MT6260
Hardware Version:8000
Software Version:CA00
>>> Downloading First Boot...
Initialization RAM Error,FUNC boot_init_1
>>> Return DATA Error!!!

using version 3.24 same problem

Code:

>>> Getting Mobile Connection Info...
    VCC Pin: 
    GND Pin: 
    Signal Pin:5, 6, 8,  
>>> Scanning Mobile PinOut...
>>> Please Hold the Power key...
    Get Mobile PinOut: TXD:5  RXD:8 
>>> Please Hold the Power key...
>>> Connecting Mobile...
    CPU_ID:MT6260 
    Tip:This Mobile Support USB Flash...
    Hardware Version:8000 
    Software Version:CA00 
>>> Downloading First Boot...
    Initialization RAM Error,FUNC boot_init_1
>>> Return DATA Error!!!

bugztronic · 06-09-2013, 05:21

please add support to all CKK MOBILE,

ckk is an speadtrum chip but they cannot read and cannot flash, some ckk unit can detect but during reset the phone killed...i think you need to correct your program to support this model..

05-21-2013, 11:32	#1 (permalink)
Faheem Anjum No Life Poster Join Date: Nov 2006 Location: (United States Of Islam) Age: 37 Posts: 24,984 Member: 399832 Status: Offline Sonork: Faheem Anjum Thanks Meter: 24,310	[Make Report In This Thread ] Latest Update !!! enjoy the latest update , all test report bugs report only here in this thread we will try to lost are give you right way to solved the problem thank you so much

05-21-2013, 18:23	#2 (permalink)
Gsm.Universal No Life Poster Join Date: Feb 2011 Location: Pakistan & UAE (Dubai) Age: 34 Posts: 3,011 Member: 1526738 Status: Offline Sonork: 100.1607644 Thanks Meter: 6,688	blast update DRAGON LOVES samsung GLAXY SIII br Gsm Universal Last edited by Gsm.Universal; 05-21-2013 at 18:31.

05-21-2013, 23:32	#4 (permalink)
bencebacsi Freak Poster Join Date: Aug 2008 Location: Hungary Posts: 320 Member: 829361 Status: Offline Thanks Meter: 107	Dragon can not read any SC6820 phones I always get the following error message. Solution has not been found. Very strange What I have done: 1. Tried on a desktop and a notebook computer under both Win7 64bit and WinXP 32bit. I also made a fresh WinXP install on the notebook. 2. Tried 8 different handsets: GT-S6010, GT-S6810, Feiting N9300, Feiting A7100, N7100, 808 Smart Phone (an old phone from last september), i9300 S9 and MPI I9082. Some of them became totally bricked after the reading attempt. They can not power on and no USB connection anymore. 3. Tried all spd driver versions available on the net. I have the latest driver installed for Dragon box. 4. Tried all COM port speed settings. 5. Tried with both box firmware versions 1.61 and 1.62 6. Tried connecting by the phones own USB cable with key press, by a patched USB cable (4-5 pins shortcutted) and via Dragon box by pin finding. I hope I didn't forget anything to mention. I always get the same result with any settings and configuration. My Dragon works well with other CPUs, I use it every day. The novelty in this new version is that I get those error nessages. In earlier versions the reading (boot) process just simply stopped. This is a really strange case because earlier (until about two months ago) I could work without any problem with SC6820 CPUs exept the writing process. Formatting is still working but that also can drive a phone to be bricked because the wrong addressing and corrupting the system partition I think. I don't know what could be happened. If my box is demaged than it shouldn't work with other CPUs and that case shouldn't affect the processes when I connect via PC USB port. All useful advice are welcome.

05-23-2013, 06:15	#8 (permalink)
6622622 No Life Poster Join Date: Apr 2011 Location: Faisalabad Pakistan Age: 40 Posts: 1,637 Member: 1562066 Status: Offline Sonork: 100.1622824 Thanks Meter: 555	dragon canot detect any spd & mstar phone dragon canot detect any spd & mstar phone its real problem @ not found solution already contact faheem anjam but he ask i dont understand this fault

05-21-2013, 18:26	#3 (permalink)
Gsm.Universal No Life Poster Join Date: Feb 2011 Location: Pakistan & UAE (Dubai) Age: 34 Posts: 3,011 Member: 1526738 Status: Offline Sonork: 100.1607644 Thanks Meter: 6,688	another beta test repot DRAGOn loves br Gsm Universal

05-22-2013, 15:26	#5 (permalink)
EMMC-BOX Junior Member Join Date: May 2013 Posts: 4 Member: 1943446 Status: Offline Thanks Meter: 3	check the driver,after pinfind,the driver name is SCI or SPRD, if is SPRD,you need re-install the spd driver to SCI port if not,it will read flash\write flash error if you can't install the driver to SCI,you can go to C:\windows\system32; hold the F3 key,input the sprd,get all about the SPRD driver file and del,after del install the SCI driver again, it will solve

05-22-2013, 21:17	#6 (permalink)
bencebacsi Freak Poster Join Date: Aug 2008 Location: Hungary Posts: 320 Member: 829361 Status: Offline Thanks Meter: 107	I already tried every possible driver setting. Now I tried again to install the SCI port drivers but I still get the same result. GPGDragon can boot up the phone with the following COM drivers: SCI General U2S(AT) SCI Vendor U2S(DIAG) CMCC AT Interface1 CMCC AT Interface1 SPRD U2S Diag (2 versions with the same number - 2.4.0.27 - but different date) and all of the above drivers by Lenovo. I have already tried all of them but I always get the same result. Btw, Spreadtrum's ResearchDownload still can flash the SC6820 phones without any problem.

05-23-2013, 13:23	#10 (permalink)
6622622 No Life Poster Join Date: Apr 2011 Location: Faisalabad Pakistan Age: 40 Posts: 1,637 Member: 1562066 Status: Offline Sonork: 100.1622824 Thanks Meter: 555	yes i face this problem

05-29-2013, 09:01	#11 (permalink)
jecams Freak Poster Join Date: Jul 2008 Location: tangub Posts: 177 Member: 823842 Status: Offline Thanks Meter: 33	HELLO I HAVE SKK MODEL K15 PROBLEM ONLY INPUT PHONE PASSWORD BUT MY PROBLEM LOGS LIKE THIS >>> Getting Mobile Connection Info... VCC Pin:24, GND Pin: Signal Pin:15, 16, 17, 18, 19, 20, 21, 22, 23, >>> Scanning Mobile PinOut... >>> USB Pinfind No need Hold Mobile Power key... USB Pin Out: D+:19 D-:17 >>> Scanning Mobile USB Port... >>> Detecting COM PortCOM42 Mobile Connection Success... CPU_ID:MT6260 Hardware Version:8000 Software Version:CA00 >>> Downloading First Boot... Initialization RAM Error,FUNC boot_init_1 >>> Return DATA Error!!!

05-30-2013, 10:00	#13 (permalink)
chmsc_ELX No Life Poster Join Date: Mar 2012 Location: gsm world Posts: 887 Member: 1741973 Status: Offline Thanks Meter: 115	dear dragon there is a problem for CPU booting or finding correct boot.. v3.24 error in finding boot v3.23A boot detect good i tried this on CKK 77 FM but even flashing in both GPG dragon version got an error or not start flashing..

06-09-2013, 05:21	#15 (permalink)
bugztronic Freak Poster Join Date: Sep 2006 Location: Queen City Age: 48 Posts: 109 Member: 346257 Status: Offline Thanks Meter: 25	please add support to all CKK MOBILE, ckk is an speadtrum chip but they cannot read and cannot flash, some ckk unit can detect but during reset the phone killed...i think you need to correct your program to support this model..