New cpu not supported with 2.11 - GSM-Forum

shamshad quresh · 12-31-2011, 10:50

i have spd 6610/20 cpu but did not suport flashing with 2.11 also chek with expert mode here is full cpu and ic info please gpg team add this cpu asap. I have 2 piece dead with 2.10 after reset and formating.

Chip info,
sr-528
f3k-153-1
udbc-1119

and

here is cpu info,

d-7142dl
j-00022
75bd2
1128-p22.

shamshad quresh · 12-31-2011, 10:51

i have problem still here is screen shots i flash with exper mode settings but no succses.please help me.
Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM30
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000225A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q64
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
The requested operation has failed.
Programming...
Compare Image: Enable
Report Post
READ FULL FLASH WORK BUT RESET AND FORMAT NOT SUPORTED HANG HO 0. I ALSO ENABLE GLOBAL SETTINGS BUT NO SUCCSESS.

somrat786 · 12-31-2011, 10:58

For write flash set baudrate to 115200

shamshad quresh · 12-31-2011, 11:28

Quote:

Originally Posted by somrat786

For write flash set baudrate to 115200

i also test one by one boutrate and boot version too. but no succsess.

12-31-2011, 10:50	#1 (permalink)
shamshad quresh No Life Poster Join Date: Nov 2008 Location: pakistan Posts: 1,944 Member: 898041 Status: Offline Sonork: 100.1593459 Thanks Meter: 549	New cpu not supported with 2.11 i have spd 6610/20 cpu but did not suport flashing with 2.11 also chek with expert mode here is full cpu and ic info please gpg team add this cpu asap. I have 2 piece dead with 2.10 after reset and formating. Chip info, sr-528 f3k-153-1 udbc-1119 and here is cpu info, d-7142dl j-00022 75bd2 1128-p22.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17

12-31-2011, 10:51	#2 (permalink)
shamshad quresh No Life Poster Join Date: Nov 2008 Location: pakistan Posts: 1,944 Member: 898041 Status: Offline Sonork: 100.1593459 Thanks Meter: 549	i have problem still here is screen shots i flash with exper mode settings but no succses.please help me. Initializing... DA_LIB_VER_3.9.0.0 It is sensing the pinout fast... D-=8 D+=6 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM30 Connected...sending boot... FDL test...OK ArmBootMode: 6610000000225A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q64 setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Unlocking all blocks before program/erase... The requested operation has failed. Programming... Compare Image: Enable Report Post READ FULL FLASH WORK BUT RESET AND FORMAT NOT SUPORTED HANG HO 0. I ALSO ENABLE GLOBAL SETTINGS BUT NO SUCCSESS.

12-31-2011, 10:58	#3 (permalink)
somrat786 Freak Poster Join Date: Dec 2006 Posts: 110 Member: 418861 Status: Offline Thanks Meter: 5	For write flash set baudrate to 115200