support mt6252a - GSM-Forum

jeanbrume · 11-05-2011, 04:19

hello i have this chinese nokia nae from back :itel model m7000 need format or flash.
log:

Code:

 Initializing...
 DA_LIB_VER_3.6.7.1
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6252,    HardwareVer:8B00,    SoftwareVer:CA04
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 0000000000000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 ProjectID Not Found.

the flash ic is mxic mx25u6435ezni(serial).

is this 2 ic supported ?
any way to repair this phone?
tnx.

RIZWANJAT · 11-05-2011, 05:40

Quote:

Nor Flash ID: 0000000000000000
Nand Flash ID: 0000000000000000

You need check with hardware like flash chip and this chip sported on Dragon box

jeanbrume · 11-05-2011, 06:44

hi
this is MXIC serial flash chip .
so GPGDragon supporters what can i do with this ?
tnx.

Faheem Anjum · 11-05-2011, 06:48

Quote:

Originally Posted by jeanbrume

hi
this is MXIC serial flash chip .
so GPGDragon supporters what can i do with this ?
tnx.

Can you tell me here that is the condition of phone ?

jeanbrume · 11-05-2011, 07:56

hi
first i take it from *******r powering and in sceen some messae about file sytem ...etc
after some tryes with GPGDragon & lastests Flash_tool (wich give :s_da_flash_not_found )
the phon does not power any more but the soft detect cpu .
i think the problem is mayby with ths mxic (8 pin ).
tnx.

Faheem Anjum · 11-05-2011, 08:05

Quote:

Originally Posted by jeanbrume

hi
first i take it from *******r powering and in sceen some messae about file sytem ...etc
after some tryes with GPGDragon & lastests Flash_tool (wich give :s_da_flash_not_found )
the phon does not power any more but the soft detect cpu .
i think the problem is mayby with ths mxic (8 pin ).
tnx.

try to find out same working phone make backup , and write back to dead phone

jeanbrume · 11-05-2011, 08:07

ps :if can help inboard there is : ef521_mb_v1.2.

jeanbrume · 11-05-2011, 08:12

dont khow if i can find same model .
but are u surre that i will not end up with same :unsupportd MXIC serial flash chip ??!!
tnx.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good prices at www.gsm-support.net	gsmsupport	GSM Mobile Links	0	12-15-2001 01:06
gsm support in Wintesla	jozep	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	05-11-2001 12:16
Logo Manager phonebook support for nokia 3310 v4.24?!?, can anyone confirm?	CountMagistus	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	04-17-2001 23:09
Who have Bartek's 2.0 SOFTWARE support all 25&35Siemens?	Baza	GSM Mobile Links	0	04-05-2001 20:07

11-05-2011, 06:44	#3 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	hi this is MXIC serial flash chip . so GPGDragon supporters what can i do with this ? tnx.

11-05-2011, 07:56	#5 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	hi first i take it from *******r powering and in sceen some messae about file sytem ...etc after some tryes with GPGDragon & lastests Flash_tool (wich give :s_da_flash_not_found ) the phon does not power any more but the soft detect cpu . i think the problem is mayby with ths mxic (8 pin ). tnx.

11-05-2011, 08:07	#7 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	ps :if can help inboard there is : ef521_mb_v1.2.

11-05-2011, 08:12	#8 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	dont khow if i can find same model . but are u surre that i will not end up with same :unsupportd MXIC serial flash chip ??!! tnx.