A7100 CPU: SC8810 Flash: NAND_H8BCS0UN0MCR Full suport test report! Again World First - GSM-Forum

Kolumb · 08-01-2013, 14:14

A7100 CPU: SC8810 Flash: NAND_H8BCS0UN0MCR

Read info:

Code:

Initializing... DA_LIB_VER_5.6.1.1 You must install the correct USB drivers before any actions... You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports... Auto reset and search the USB-to-Serial... Connecting... Spd USB-to-Serial=COM12 Connected...sending boot... Boot1 is Done. Wait for ACK... Done. Change baud to 921600 Sending Boot2... Boot2 is Done. Wait for ACK... Done. ArmBootMode: 8810004000005A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC8810 Flash: NAND_H8BCS0UN0MCR setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 00 Failed to get address of NV. Read FS info...done

Read full:

Code:

Initializing... DA_LIB_VER_5.6.1.1 You must install the correct USB drivers before any actions... You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports... Auto reset and search the USB-to-Serial... Connecting... Spd USB-to-Serial=COM12 Connected...sending boot... Boot1 is Done. Wait for ACK... Done. Change baud to 921600 Sending Boot2... Boot2 is Done. Wait for ACK... Done. ArmBootMode: 8810004000005A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC8810 Flash: NAND_H8BCS0UN0MCR setting the Flash Parameters... Settings have been completed! Reading Flash... Save as: C:\Users\Администратор\Desktop\A7100_ CPU_SC8810_Flash_NAND_H8BCS0UN0MCR.cmz All Done.

Repair IMEI:

Code:

Initializing... DA_LIB_VER_5.6.1.1 1: Switch ON your phone... 2: Insert the USB download (charging) cable, don't set the boot of pinout or hold on the boot key... 3: You will see a new ComPort: SCI Vendor U2S(DIAG)(COMxx) in PC Device Manager -> Ports... Auto reset and search the USB-to-Serial... Connecting... Spd USB-to-Serial=COM13 Reading imei from nv... Read imei from nv is done. imei1=35270900016**** imei2=35270920016**** imei3=35857001010**** imei4=91057560140**** Saving imei to nv... Rebulid IMEI1=35305655858**** Rebulid IMEI2=35305687278**** Rebulid IMEI3=35305623641**** Rebulid IMEI4=35305638945**** All done

Unlock:

Code:

Initializing... DA_LIB_VER_5.6.1.1 You must install the correct USB drivers before any actions... You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports... Auto reset and search the USB-to-Serial... Connecting... Spd USB-to-Serial=COM12 Connected...sending boot... Boot1 is Done. Wait for ACK... Done. Change baud to 921600 Sending Boot2... Boot2 is Done. Wait for ACK... Done. ArmBootMode: 8810004000005A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC8810 Flash: NAND_H8BCS0UN0MCR setting the Flash Parameters... Settings have been completed! Running Tracker of Android...

Hovered at 98% - reset code (draw any code - all fit)

Write full:

Code:

Initializing... DA_LIB_VER_5.6.1.1 You must install the correct USB drivers before any actions... You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports... Auto reset and search the USB-to-Serial... Connecting... Spd USB-to-Serial=COM12 Connected...sending boot... Boot1 is Done. Wait for ACK... Done. Change baud to 921600 Sending Boot2... Boot2 is Done. Wait for ACK... Done. ArmBootMode: 8810004000005A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC8810 Flash: NAND_H8BCS0UN0MCR setting the Flash Parameters... Settings have been completed! Unlocking all blocks before program/erase... Unlock Done. Erasing Flash... Done. Programming... All Done.

Phone is switched on and working perfectly:

dracony · 08-03-2013, 08:21

give me link for firmware A7100

Teplok · 08-03-2013, 08:24

give me firmware,please...........

Kolumb · 08-03-2013, 08:34

This firmware is only for Avatоr box (Crypted in the format *CMZ)
You have Avatоr box?

P.S. Especially for you, for a fee, can I convert this firmware in *BIN format.

.

Kolumb · 08-03-2013, 08:44

P.S.S. Convert to *pac format that will be even more expensive.

Teplok · 08-03-2013, 09:19

up...............help please

Kolumb · 08-03-2013, 09:30

Quote:

Originally Posted by Teplok

up...............help please

You have not answered my question!

You have Avatоr box?

I see that there is:
http://forum.gsmhosting.com/vbb/9334524-post50.html

On Monday - will firmware for avator box.

.::King_Arif::. · 08-03-2013, 15:59

kindly share the flash file bro

Kolumb · 08-05-2013, 13:21

DOWNLOAD FULL:
A7100 CPU: SC8810 Flash: NAND_H8BCS0UN0MCR

.::King_Arif::. · 08-07-2013, 16:16

thanks bro really appreciate...

jimmymobile · 09-02-2013, 06:09

pl help me file flash.thanks
A7100 5.0” Android 4.0 Spreadtrum SC6820 Cortex A5 1.0GHz
http://forum.gsmhosting.com/vbb/f781...-0ghz-1658446/

Kolumb · 09-02-2013, 10:10

Quote:

Originally Posted by jimmymobile

pl help me file flash.thanks
A7100 5.0” Android 4.0 Spreadtrum SC6820 Cortex A5 1.0GHz
http://forum.gsmhosting.com/vbb/f781...-0ghz-1658446/

You have Avatоr box?

ALI MAJIDINIA · 09-03-2013, 00:34

i read full flash from alive phone with cpu 8810

and save file with .cmz format that its 528mb

i write to another the same phone (was dead just vibrating) phone became fully dead

whats the problem???

br
majidinia

Kolumb · 09-03-2013, 08:57

Where screenshots?
Where logs Programs?

ALI MAJIDINIA · 09-05-2013, 21:46

Quote:

Originally Posted by Kolumb

Where screenshots?
Where logs Programs?

my phone became flash fully

log and other thing are ok

but after flash phone fully dead

br

majidinia

08-03-2013, 08:34	#4 (permalink)
Kolumb No Life Poster Join Date: Apr 2011 Location: Ukraine Khmelnytsky Posts: 900 Member: 1558427 Status: Offline Thanks Meter: 630	This firmware is only for Avatоr box (Crypted in the format CMZ) You have Avatоr box? P.S. Especially for you, for a fee, can I convert this firmware in BIN format.** . Last edited by Kolumb; 08-03-2013 at 08:41.

08-05-2013, 13:21	#9 (permalink)
Kolumb No Life Poster Join Date: Apr 2011 Location: Ukraine Khmelnytsky Posts: 900 Member: 1558427 Status: Offline Thanks Meter: 630	DOWNLOAD FULL: A7100 CPU: SC8810 Flash: NAND_H8BCS0UN0MCR Last edited by Kolumb; 08-05-2013 at 13:31.

08-03-2013, 08:21	#2 (permalink)
dracony Freak Poster Join Date: Jan 2011 Location: Tashkent, Uzbekistan Age: 35 Posts: 236 Member: 1487727 Status: Offline Sonork: 100.1607104 Thanks Meter: 38	give me link for firmware A7100

08-03-2013, 08:24	#3 (permalink)
Teplok Major Poster Join Date: Apr 2011 Location: indonesia Posts: 45 Member: 1562423 Status: Offline Thanks Meter: 1	give me firmware,please...........

08-03-2013, 08:44	#5 (permalink)
Kolumb No Life Poster Join Date: Apr 2011 Location: Ukraine Khmelnytsky Posts: 900 Member: 1558427 Status: Offline Thanks Meter: 630	*P.S.S. Convert to pac format that will be even more expensive.**

08-03-2013, 09:19	#6 (permalink)
Teplok Major Poster Join Date: Apr 2011 Location: indonesia Posts: 45 Member: 1562423 Status: Offline Thanks Meter: 1	up...............help please

08-03-2013, 15:59	#8 (permalink)
.::King_Arif::. Temporary banned !! Join Date: Nov 2012 Posts: 264 Member: 1841569 Status: Offline Sonork: 100.1648551 Thanks Meter: 38	kindly share the flash file bro

08-07-2013, 16:16	#10 (permalink)
.::King_Arif::. Temporary banned !! Join Date: Nov 2012 Posts: 264 Member: 1841569 Status: Offline Sonork: 100.1648551 Thanks Meter: 38	thanks bro really appreciate...

09-02-2013, 06:09	#11 (permalink)
jimmymobile Freak Poster Join Date: Apr 2006 Location: vietnam Posts: 372 Member: 259188 Status: Offline Thanks Meter: 79	pl help me file flash.thanks A7100 5.0” Android 4.0 Spreadtrum SC6820 Cortex A5 1.0GHz http://forum.gsmhosting.com/vbb/f781...-0ghz-1658446/

09-03-2013, 00:34	#13 (permalink)
ALI MAJIDINIA Freak Poster Join Date: May 2013 Location: IRAN__SHIRAZ Posts: 161 Member: 1933631 Status: Offline Sonork: 100.1618169 Thanks Meter: 52	i read full flash from alive phone with cpu 8810 and save file with .cmz format that its 528mb i write to another the same phone (was dead just vibrating) phone became fully dead whats the problem??? br majidinia

09-03-2013, 08:57	#14 (permalink)
Kolumb No Life Poster Join Date: Apr 2011 Location: Ukraine Khmelnytsky Posts: 900 Member: 1558427 Status: Offline Thanks Meter: 630	Where screenshots? Where logs Programs?