Avator Box Fly DS113 Unlock Done

[Kolumb]

Info:

-------------------Created: 07.03.2016 12:09:32-------------------

Chip=MTK
Action=ReadInfo
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

CPU_Type=MT6252
CPU_ID=00000007
NOR_ID=00EF004000150000
NOR_Size=2MB
NOR_Name=[WINBOND] W25Q16CV
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

 Initializing...
 DA_LIB_VER_6.2.0.3
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=22  TXD=24
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6252,    HardwareVer:8B00,    SoftwareVer:CA05
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00EF004000150000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: DS113_MP_F1_FLY_F1_V15

+++++++++++++++++++End at: 07.03.2016 12:09:46+++++++++++++++++++

Unlock:

-------------------Created: 07.03.2016 12:09:52-------------------

Chip=MTK
Action=Unlock
FlashType=NOR
boot=Ver5.1232
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

 Initializing...
 DA_LIB_VER_6.2.0.3
 Tip: The phone must be able to power-on normally
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6252,    HardwareVer:8B00,    SoftwareVer:CA05
 Read info...ok, Waitting enter meta...
 Connected...can release Power button now, tracking...
 Code=1239

+++++++++++++++++++End at: 07.03.2016 12:10:09+++++++++++++++++++