Error imei SC6820 [ Solved setting com port to low ] - GSM-Forum

turca · 01-18-2015, 21:04

Error imei SC6820. I have make flash with original pac, but imei is corrupt

rahaman93 · 01-18-2015, 21:19

First u need read full flash from running other handset
write in faulty handset im 100% sure ur problem solve

rahaman93 · 01-18-2015, 21:21

Or Post info log
iwill check

turca · 01-18-2015, 22:28

I read full flash phone work, after i write flash, but imei no change

turca · 01-18-2015, 22:29

I post in log reclamation " post picture" I post picture reclamation "post log" correct is picture or log?

turca · 01-18-2015, 22:38

Initializing...
DA_LIB_VER_6.1.0.5
1: Switch ON your phone...
2: Insert the USB download (charging) cable, don't set the boot of pinout or hold on the boot key...
3: You will see a new ComPort: SCI Vendor U2S(DIAG)(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM235
Reading imei from nv...
Original imei not found.

Smart-gsm · 01-19-2015, 03:31

Try again ... 1 or 2 times ..

..:\\lucky//:.. · 01-19-2015, 06:14

First check in settings ,is baseband ok ? Then try to change or repair imei but change drivers first .If no luck you can change imei with file method .It works.

http://forum.gsmhosting.com/vbb/10244356-post1.html

turca · 01-19-2015, 15:29

Have correct driver for test, other box work, only avator no work

..:\\lucky//:.. · 01-19-2015, 15:39

Quote:

Originally Posted by turca

Have correct driver for test, other box work, only avator no work

Bro read this logs .

Code:

Initializing...
 DA_LIB_VER_5.6.1.1
 1: Switch ON your phone...
 2: Insert the USB download (charging) cable, don't set the boot of pinout or hold on the boot key...
 3: You will see a new ComPort: SCI Vendor U2S(DIAG)(COMxx) in PC Device Manager -> Ports...
 Auto reset and search the USB-to-Serial...
 Connecting...
 Spd USB-to-Serial=COM155
 Reading imei from nv...
 Read imei from nv is done.
 imei1=352545001695731
 imei2=000000000000000
 imei3=352545001695731
 imei4=000000000000000
 Saving imei to nv...
 Rebulid IMEI1=352545001615655
 All done

During imei repairing ,do not press any key .It will work.

turca · 01-19-2015, 16:39

Quote:

Originally Posted by ..:\\lucky//:..

Bro read this logs .

Code:

Initializing...
 DA_LIB_VER_5.6.1.1
 1: Switch ON your phone...
 2: Insert the USB download (charging) cable, don't set the boot of pinout or hold on the boot key...
 3: You will see a new ComPort: SCI Vendor U2S(DIAG)(COMxx) in PC Device Manager -> Ports...
 Auto reset and search the USB-to-Serial...
 Connecting...
 Spd USB-to-Serial=COM155
 Reading imei from nv...
 Read imei from nv is done.
 imei1=352545001695731
 imei2=000000000000000
 imei3=352545001695731
 imei4=000000000000000
 Saving imei to nv...
 Rebulid IMEI1=352545001615655
 All done

During imei repairing ,do not press any key .It will work.

Read my log, phone not found imei in nv! Other box write imei perfect, but Avator no, But I prefer to use avator, This is bug!

..:\\lucky//:.. · 01-19-2015, 16:49

Quote:

Originally Posted by turca

Read my log, phone not found imei in nv! Other box write imei perfect, but Avator no, But I prefer to use avator, This is bug!

Dont worry bro ,next time contact with me , if facing same problem ,i,ll help you on tv .

andriu · 01-22-2015, 03:26

Initializing...
DA_LIB_VER_6.1.0.5
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Spd USB-to-Serial not found

..:\\lucky//:.. · 01-22-2015, 04:38

Quote:

Originally Posted by andriu

Initializing...
DA_LIB_VER_6.1.0.5
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Spd USB-to-Serial not found

Connect your phone only with simple usb data cable and install these spd drivers. Download SPD New Drivers zip

turca · 01-27-2015, 14:15

I have other phone same problem, Imei diag no solved for me
I have installed new driver, bvut same problem
Base bando is ok

Initializing...
DA_LIB_VER_6.1.0.5
1: Switch ON your phone...
2: Insert the USB download (charging) cable, don't set the boot of pinout or hold on the boot key...
3: You will see a new ComPort: SCI Vendor U2S(DIAG)(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM231
Reading imei from nv...
Original imei not found.

01-18-2015, 21:19	#2 (permalink)
rahaman93 Freak Poster Join Date: Apr 2008 Location: INDIA Posts: 107 Member: 744614 Status: Offline Sonork: 100.1615855 Thanks Meter: 43	First u need read full flash from running other handset write in faulty handset im 100% sure ur problem solve

01-18-2015, 21:21	#3 (permalink)
rahaman93 Freak Poster Join Date: Apr 2008 Location: INDIA Posts: 107 Member: 744614 Status: Offline Sonork: 100.1615855 Thanks Meter: 43	Or Post info log iwill check

01-18-2015, 22:29	#5 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,381 Member: 211017 Status: Offline Thanks Meter: 312	I post in log reclamation " post picture" I post picture reclamation "post log" correct is picture or log?

01-18-2015, 22:38	#6 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,381 Member: 211017 Status: Offline Thanks Meter: 312	Initializing... DA_LIB_VER_6.1.0.5 1: Switch ON your phone... 2: Insert the USB download (charging) cable, don't set the boot of pinout or hold on the boot key... 3: You will see a new ComPort: SCI Vendor U2S(DIAG)(COMxx) in PC Device Manager -> Ports... Auto reset and search the USB-to-Serial... Connecting... Spd USB-to-Serial=COM235 Reading imei from nv... Original imei not found.

01-19-2015, 03:31	#7 (permalink)
Smart-gsm No Life Poster Join Date: Jan 2010 Location: China Posts: 1,459 Member: 1222089 Status: Offline Sonork: 100.1583019 Thanks Meter: 2,688	Try again ... 1 or 2 times ..

01-19-2015, 06:14	#8 (permalink)
..:\\lucky//:.. No Life Poster $..:\\lucky//:..'s Avatar$ Join Date: Jan 2013 Location: (Tech land) Posts: 2,019 Member: 1864000 Status: Offline Thanks Meter: 2,893	First check in settings ,is baseband ok ? Then try to change or repair imei but change drivers first .If no luck you can change imei with file method .It works. http://forum.gsmhosting.com/vbb/10244356-post1.html

01-19-2015, 15:29	#9 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,381 Member: 211017 Status: Offline Thanks Meter: 312	Have correct driver for test, other box work, only avator no work

01-22-2015, 03:26	#13 (permalink)
andriu Insane Poster Join Date: Mar 2007 Location: BOLIVIA Posts: 82 Member: 459223 Status: Offline Sonork: 100.1609945 Thanks Meter: 21	Initializing... DA_LIB_VER_6.1.0.5 You must install the correct USB drivers before any actions... You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports... Auto reset and search the USB-to-Serial... Spd USB-to-Serial not found