Please Support MTK6260 - GSM-Forum

elvahape · 09-09-2013, 18:37

To: Avator Box Team

Twice I handle two phones with different brands using CPU MTK6260. And all of them can not be handled by Avator Box (see screen shoot). I hope there is an update soon that could Avator to handle this cpu. Thank you

Regards...
elvahape

Kolumb · 09-09-2013, 21:04

Select another bоot, then try again.
Try reducing the speed.

If the result will not solder the processor and flash chip.

elvahape · 09-10-2013, 03:33

change boots, interface, soldering cable on RX TX board and baudrate i do but result is same Bos. If i check in last update, list support for MTK CPU only MTK6255 (point 10).

http://forum.gsmhosting.com/vbb/f652...pport-1686121/

eko_2222 · 09-10-2013, 05:08

Initializing...
DA_LIB_VER_5.6.1.1
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6260, HardwareVer:CA00, SoftwareVer:0000
Failed to set Uart_AUTOBAUDSAMPLE, REG=0x80130038

same not support for 6260

Kolumb · 09-10-2013, 07:49

Quote:

Originally Posted by elvahape

change boots, interface, soldering cable on RX TX board and baudrate i do but result is same Bos.

to solder the CPU chip and Flash

Quote:

Originally Posted by Kolumb

All comers, the solution, FAQ, to write this!

Error: Failed to send the flash table to DA

SLOWED

Another attempt to read full through a FlashTool v5.1312.

http://forum.gsmhosting.com/vbb/f652...2/#post9537175

09-09-2013, 21:04	#2 (permalink)
Kolumb No Life Poster Join Date: Apr 2011 Location: Ukraine Khmelnytsky Posts: 900 Member: 1558427 Status: Offline Thanks Meter: 630	Select another bоot, then try again. Try reducing the speed. If the result will not solder the processor and flash chip.

09-10-2013, 03:33	#3 (permalink)
elvahape Freak Poster Join Date: Sep 2010 Location: Elva Cellular - Indonesia Posts: 151 Member: 1386044 Status: Offline Thanks Meter: 65	change boots, interface, soldering cable on RX TX board and baudrate i do but result is same Bos. If i check in last update, list support for MTK CPU only MTK6255 (point 10). http://forum.gsmhosting.com/vbb/f652...pport-1686121/

09-10-2013, 05:08	#4 (permalink)
eko_2222 Junior Member Join Date: Jun 2013 Posts: 34 Member: 1964282 Status: Offline Thanks Meter: 3	Initializing... DA_LIB_VER_5.6.1.1 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6260, HardwareVer:CA00, SoftwareVer:0000 Failed to set Uart_AUTOBAUDSAMPLE, REG=0x80130038 same not support for 6260