[FENIX - KEY] Bugs & Requests only HERE - Page 5 - GSM-Forum

cellcityludhian · 03-05-2011, 14:34

Quote:

Originally Posted by Lavarow

Check your firewall if not block anything, also if this don't help try in some place where is different internet connection and write about result.

B.R.
Lavarow

sir its ok now due to my firewall its not updating card now working good

kamel928 · 03-08-2011, 18:35

hello i have big probleme with fenix
after one weak waited!! fenix sl3 said me BAD DATA PHONE or something else and now restart calcultaion from 0 :s whyyyyyyyyyyyy??? please how to resume ???

kamel928 · 03-08-2011, 18:44

just in 100% it's said that!!!!!!!!!!!!!!!!

TERILEX NETWORK · 03-17-2011, 14:04

Here is screen shot of successful flashing of Dead Nokia N95.Rm 159

Software version: 1.0.5
Detected card sn: D12284DBA55C
Card version: 00.08
Life counter: 99,8%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Connecting to JAF FLASHER INTERFACE #1 (SN: DiTLAB6M)
Firmware version: 01.B4
Connected to JAF interface.
Connection interface is set to JAF now.
Job's finished successfully!
Looking for flash files
Flash files found for selected product
Flashing started
Reading important PM fields
Checking connection
Powering on the phone
Could not read SIMLOCK data. Flashing is being continued.
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600010006400C192101011103
Public ID : 1650000F476300583E6C4B368474D232CEA6F6BB
Hash : CAEEBB65D3C48E6DC73B49DC5063A2EE
Hardware ID: 400C192101011103

APE Boot Data
--------------
Asic ID : 24200705
Public ID : 5D7909890FC5320D844B89C4BA4DC46122444587
Hash : BA8710A7E1CD5A2909B9A875DB27AA2400000000
Hardware ID: 24200705

Sending 2ND...
Sending algo...
Booting APE...
Sending 2ND...
Sending Algo...

CMT Flash info:
Vendor : 0001 [SPANSION]
Product: 0035 [72NS128N]
APE Flash info:
Vendor : 00EC [SAMSUNG (SEC)]
Product: 0040 [KAT00F00RA]

Reading certificates
Reading CMT certificates
Reading NPC
Saving NPC
Reading VARIANT
Saving VARIANT
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Reading APE certificates
Reading NPC
Saving NPC
Reading VARIANT
Saving VARIANT
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Programme\Nokia\Phoenix\Products\17.03.2011 13-27-47-17.03.2011 13-27-47.rpl
Partitioning file: RM-159_35.0.002_PR.C0R
Partitioning file: RM-159_35.0.002_PR.v06
Erasing MCUSW Flash area
Erasing CMT area 00080000 - 007B1641
Erasing CMT area 00000000 - 0005FFFF
Erasing CMT area 00880000 - 00FDFFFF
Erasing APE area 00000200 - 0000AFFF
Erasing APE area 0000B800 - 000AFFFF
Erasing APE area 00000000 - 00000FFF
Erasing APE area 0000D800 - 0000E9FF
Erasing APE area 00080000 - 000BFFFF
Erasing APE area 000E0000 - 0045FFFF
Erasing APE area 004C0000 - 0073FFFF
Erasing APE area 00A40000 - 0633FFFF
Erasing PPM Flash area
Erasing APE area 04C40000 - 0633FFFF
Erasing CNT Flash area
Erasing APE area 06340000 - 0FA3FFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Short delay between flash files
Flashing MCUSW
Sending X-LOADER
Sending KEYS
Sending PRIMAPP
Sending X-LOADER
Sending KEYS
Sending PRIMAPP
Sending SOS+XZIP
Sending PASUBTOC
MCU PAPUBKEYS are missing, sending first available block
Sending PAPUBKEYS
Sending SOS+UPDAPP
Sending SOS+CORE
Sending SOS+ROFS
Short delay between flash files
Flashing PPM
Sending SOS+ROFX
Short delay between flash files
Flashing CNT
Finishing CMT loader session...
Finishing APE loader session...
Powering the phone
Cannot read data buffer
Job's finished with errors!

1.I dont understand why it cannot Read Data Buffer.

2. I dont understand why Job finished with Error !

Anyway,the N95 ...RM 159 is working 100% after FLASHING !

el-polaco · 03-17-2011, 15:34

Quote:

Originally Posted by TERILEX NETWORK

Here is screen shot of successful flashing of Dead Nokia N95.Rm 159

Software version: 1.0.5
Detected card sn: D12284DBA55C
Card version: 00.08
Life counter: 99,8%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Connecting to JAF FLASHER INTERFACE #1 (SN: DiTLAB6M)
Firmware version: 01.B4
Connected to JAF interface.
Connection interface is set to JAF now.
Job's finished successfully!
Looking for flash files
Flash files found for selected product
Flashing started
Reading important PM fields
Checking connection
Powering on the phone
Could not read SIMLOCK data. Flashing is being continued.
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600010006400C192101011103
Public ID : 1650000F476300583E6C4B368474D232CEA6F6BB
Hash : CAEEBB65D3C48E6DC73B49DC5063A2EE
Hardware ID: 400C192101011103

APE Boot Data
--------------
Asic ID : 24200705
Public ID : 5D7909890FC5320D844B89C4BA4DC46122444587
Hash : BA8710A7E1CD5A2909B9A875DB27AA2400000000
Hardware ID: 24200705

Sending 2ND...
Sending algo...
Booting APE...
Sending 2ND...
Sending Algo...

CMT Flash info:
Vendor : 0001 [SPANSION]
Product: 0035 [72NS128N]
APE Flash info:
Vendor : 00EC [SAMSUNG (SEC)]
Product: 0040 [KAT00F00RA]

Reading certificates
Reading CMT certificates
Reading NPC
Saving NPC
Reading VARIANT
Saving VARIANT
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Reading APE certificates
Reading NPC
Saving NPC
Reading VARIANT
Saving VARIANT
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Programme\Nokia\Phoenix\Products\17.03.2011 13-27-47-17.03.2011 13-27-47.rpl
Partitioning file: RM-159_35.0.002_PR.C0R
Partitioning file: RM-159_35.0.002_PR.v06
Erasing MCUSW Flash area
Erasing CMT area 00080000 - 007B1641
Erasing CMT area 00000000 - 0005FFFF
Erasing CMT area 00880000 - 00FDFFFF
Erasing APE area 00000200 - 0000AFFF
Erasing APE area 0000B800 - 000AFFFF
Erasing APE area 00000000 - 00000FFF
Erasing APE area 0000D800 - 0000E9FF
Erasing APE area 00080000 - 000BFFFF
Erasing APE area 000E0000 - 0045FFFF
Erasing APE area 004C0000 - 0073FFFF
Erasing APE area 00A40000 - 0633FFFF
Erasing PPM Flash area
Erasing APE area 04C40000 - 0633FFFF
Erasing CNT Flash area
Erasing APE area 06340000 - 0FA3FFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Short delay between flash files
Flashing MCUSW
Sending X-LOADER
Sending KEYS
Sending PRIMAPP
Sending X-LOADER
Sending KEYS
Sending PRIMAPP
Sending SOS+XZIP
Sending PASUBTOC
MCU PAPUBKEYS are missing, sending first available block
Sending PAPUBKEYS
Sending SOS+UPDAPP
Sending SOS+CORE
Sending SOS+ROFS
Short delay between flash files
Flashing PPM
Sending SOS+ROFX
Short delay between flash files
Flashing CNT
Finishing CMT loader session...
Finishing APE loader session...
Powering the phone
Cannot read data buffer
Job's finished with errors!

1.I dont understand why it cannot Read Data Buffer.

2. I dont understand why Job finished with Error !

Anyway,the N95 ...RM 159 is working 100% after FLASHING !

The phone is ok becouse is flashed ok...but.

Menu - Flashing - post flashing action

you have - set default-set product code-full factory-normal mode.

try manually set default/product code/etc

post flashing action error...maybe not enough power for power on again your phone

Fenix just made a fix (autoupdate) at this time for 1.05 version

b/r

polaco

sgeri · 03-19-2011, 19:50

Hello!
I'm trying to flashing 6131, but ....

Quote:

Flashing started
Battery voltage: 3937mV
Reading important PM fields
Checking connection
Field received. ID = 308
PM backup saved as: C:\Users\**********Lavarow\Fenix\Backup\Pm\3593900 ******-2011.03.19. 14-09-09.pm
CMT Flash: SPANSION - Unknown product
Extracting loaders from flash files
Sending CMT loader
Reconnecting
Loader is alive!
Checking software version
Device communication timeout occurred
Job's finished with errors!

Whatever, this phone has a flash, but Fenix, you do not ....

Perhaps idea?? I look forward selected a, Hi.: sgeri

piracik · 03-20-2011, 11:09

Quote:

Originally Posted by sgeri

Hello!
I'm trying to flashing 6131, but ....

Whatever, this phone has a flash, but Fenix, you do not ....

Perhaps idea?? I look forward selected a, Hi.: sgeri

Try dead usb and disabled check downgrade status

Andrew_n10 · 03-21-2011, 11:13

Software version: 1.0.5
Detected card sn: AABA97CD2FF7
Card version: 00.08
Life counter: 99,73%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Connecting to UFS3 SarasSoft #1 (SN: 132859)
UFxBoot V2.2 (c) SarasSoft 2003
UFS_USB V2.8 (c) SarasSoft 2007
Connected to UFS interface.
Connection interface is set to UFS now.
Job's finished successfully!
SL3 Unlocking started
Setting flash mode
Reading CMT boot data...
Cannot get phone boot info. Please make sure that phone is connected and you are using a high quality cable
Job's finished with errors!
SL3 Unlocking started
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600000001020C192102044100
Public ID : 2D200204125200492FC22457F9B2B3D7B0B6BD07
Hash : 7B045400E1752022F9EB80B0DEA9C65D
Hardware ID: 020C192102044100

Sending 2ND...
Cannot initialize booting 2ND
Job's finished with errors!

Nokia 7230 SL3 FB, not work

el-polaco · 03-21-2011, 15:42

Quote:

Originally Posted by Andrew_n10

Software version: 1.0.5
Detected card sn: AABA97CD2FF7
Card version: 00.08
Life counter: 99,73%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Connecting to UFS3 SarasSoft #1 (SN: 132859)
UFxBoot V2.2 (c) SarasSoft 2003
UFS_USB V2.8 (c) SarasSoft 2007
Connected to UFS interface.
Connection interface is set to UFS now.
Job's finished successfully!
SL3 Unlocking started
Setting flash mode
Reading CMT boot data...
Cannot get phone boot info. Please make sure that phone is connected and you are using a high quality cable
Job's finished with errors!
SL3 Unlocking started
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600000001020C192102044100
Public ID : 2D200204125200492FC22457F9B2B3D7B0B6BD07
Hash : 7B045400E1752022F9EB80B0DEA9C65D
Hardware ID: 020C192102044100

Sending 2ND...
Cannot initialize booting 2ND
Job's finished with errors!

Nokia 7230 SL3 FB, not work

Hi, have you flashed this Phone USB Via?
Please an you sohowme scan phone please
Usb via and Fbus via.
Thnks for helpme

PD. Delete your serial number Fenix & Ufs

you never know

Polaco

paulgsmpaulgsm · 03-22-2011, 15:04

Why there is no Nokia N8 RM-596 file in support for download ?

piracik · 03-23-2011, 19:39

Quote:

Originally Posted by paulgsmpaulgsm

Why there is no Nokia N8 RM-596 file in support for download ?

There are files on Nokia support

for shure i flashed it in January...

speed infotech · 04-08-2011, 06:53

n79 read pm error

Software version: 1.0.6
Detected card sn: xxxxxxxxxx
Card version: 00.09
Life counter: 89.87%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Checking connection...
Reading phone info
Product type: RM-348
MCU SW Version:
V ICPR72_09w18.4
14-10-09
RM-348
(c) Nokia
Imei:
Product code: 0577234
Simlock status:
Profile bits: 0000000000000000
Config key: 2440700000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 2:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 3:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 4:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 5:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 6:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 7:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Looking for flash files
No flash files found for selected product
Job's finished successfully!
Checking connection...
Reading PM
Field received. ID = 1
Field received. ID = 2
Field received. ID = 4
Field received. ID = 8
Field received. ID = 11
Field received. ID = 12
Field received. ID = 31
Field received. ID = 44
Field received. ID = 50
Field received. ID = 54
Field received. ID = 88
Field received. ID = 96
Field received. ID = 107
An error occurred: Device communication timeout occurred
Job's finished with errors!

------------------------------------------

fleshin error

Checking connection...
Reading phone info
Product type: RM-348
MCU SW Version:
V ICPR72_09w18.4
14-10-09
RM-348
(c) Nokia
Imei: xxxxxxxxxxxxxxxxx
Product code: 0577234
Simlock status:
Profile bits: 0000000000000000
Config key: 2440700000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 2:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 3:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 4:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 5:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 6:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 7:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Looking for flash files
No flash files found for selected product
Job's finished successfully!
Flashing started
Battery voltage: 3954mV
Reading important PM fields
Checking connection
Field received. ID = 120
Could not read SIMLOCK data. Flashing is being continued.
Communication error
Job's finished with errors!

tavoonly · 04-19-2011, 17:04

Hi,

I'm a new user and I'm facing a problem with Fenix key. When I tried to select the path on which the flashing files are located the software just freeze out and cannot make anything on it.

Is there anyway to solve this problem?

**Lavarow** · 04-19-2011, 18:42

Quote:

Originally Posted by tavoonly

Hi,

I'm a new user and I'm facing a problem with Fenix key. When I tried to select the path on which the flashing files are located the software just freeze out and cannot make anything on it.

Is there anyway to solve this problem?

Contact with me on my Sonork.

BR,
Lavarow

MT-TECHNOLOGY · 04-20-2011, 07:17

Quote:

Originally Posted by tavoonly

Hi,

I'm a new user and I'm facing a problem with Fenix key. When I tried to select the path on which the flashing files are located the software just freeze out and cannot make anything on it.

Is there anyway to solve this problem?

connect with me by teamview
as also present always sonork & yahoo......................

03-17-2011, 14:04	#64 (permalink)
TERILEX NETWORK Junior Member Join Date: Jun 2009 Location: Europe Posts: 33 Member: 1054507 Status: Offline Thanks: 4 Thanked 11 Times in 6 Posts	Nokia N95 Successfully Flashed with Fnix Key....with Jaf Interface Here is screen shot of successful flashing of Dead Nokia N95.Rm 159 Software version: 1.0.5 Detected card sn: D12284DBA55C Card version: 00.08 Life counter: 99,8% Fenix Reader SW version: 0.0.2 Connection interface is set to USB now. Connecting to JAF FLASHER INTERFACE #1 (SN: DiTLAB6M) Firmware version: 01.B4 Connected to JAF interface. Connection interface is set to JAF now. Job's finished successfully! Looking for flash files Flash files found for selected product Flashing started Reading important PM fields Checking connection Powering on the phone Could not read SIMLOCK data. Flashing is being continued. Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600010006400C192101011103 Public ID : 1650000F476300583E6C4B368474D232CEA6F6BB Hash : CAEEBB65D3C48E6DC73B49DC5063A2EE Hardware ID: 400C192101011103 APE Boot Data -------------- Asic ID : 24200705 Public ID : 5D7909890FC5320D844B89C4BA4DC46122444587 Hash : BA8710A7E1CD5A2909B9A875DB27AA2400000000 Hardware ID: 24200705 Sending 2ND... Sending algo... Booting APE... Sending 2ND... Sending Algo... CMT Flash info: Vendor : 0001 [SPANSION] Product: 0035 [72NS128N] APE Flash info: Vendor : 00EC [SAMSUNG (SEC)] Product: 0040 [KAT00F00RA] Reading certificates Reading CMT certificates Reading NPC Saving NPC Reading VARIANT Saving VARIANT Reading CCC Saving CCC Reading HWC Saving HWC Reading APE certificates Reading NPC Saving NPC Reading VARIANT Saving VARIANT Reading CCC Saving CCC Reading HWC Saving HWC Certificates saved as: C:\Programme\Nokia\Phoenix\Products\17.03.2011 13-27-47-17.03.2011 13-27-47.rpl Partitioning file: RM-159_35.0.002_PR.C0R Partitioning file: RM-159_35.0.002_PR.v06 Erasing MCUSW Flash area Erasing CMT area 00080000 - 007B1641 Erasing CMT area 00000000 - 0005FFFF Erasing CMT area 00880000 - 00FDFFFF Erasing APE area 00000200 - 0000AFFF Erasing APE area 0000B800 - 000AFFFF Erasing APE area 00000000 - 00000FFF Erasing APE area 0000D800 - 0000E9FF Erasing APE area 00080000 - 000BFFFF Erasing APE area 000E0000 - 0045FFFF Erasing APE area 004C0000 - 0073FFFF Erasing APE area 00A40000 - 0633FFFF Erasing PPM Flash area Erasing APE area 04C40000 - 0633FFFF Erasing CNT Flash area Erasing APE area 06340000 - 0FA3FFFF Flashing MCUSW Sending NOLO Sending KEYS Sending PRIMAPP Sending PASUBTOC Sending PAPUBKEYS Sending UPDAPP Sending DSP0 Sending MCUSW Short delay between flash files Flashing MCUSW Sending X-LOADER Sending KEYS Sending PRIMAPP Sending X-LOADER Sending KEYS Sending PRIMAPP Sending SOS+XZIP Sending PASUBTOC MCU PAPUBKEYS are missing, sending first available block Sending PAPUBKEYS Sending SOS+UPDAPP Sending SOS+CORE Sending SOS+ROFS Short delay between flash files Flashing PPM Sending SOS+ROFX Short delay between flash files Flashing CNT Finishing CMT loader session... Finishing APE loader session... Powering the phone Cannot read data buffer Job's finished with errors! 1.I dont understand why it cannot Read Data Buffer. 2. I dont understand why Job finished with Error ! Anyway,the N95 ...RM 159 is working 100% after FLASHING !

03-22-2011, 15:04	#70 (permalink)
paulgsmpaulgsm Freak Poster Join Date: Sep 2004 Age: 35 Posts: 105 Member: 80353 Status: Offline Thanks: 14 Thanked 4 Times in 4 Posts	Why there is no Nokia N8 RM-596 file in support for download ? Last edited by paulgsmpaulgsm; 03-22-2011 at 15:13.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Phone Stuff for FREE & KEy-GEn For Logo Editor !	BoNtEk - ThA WtC MeMbA	Nokia Multimedia	10	03-11-2013 15:27
DES key Driver	black	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	07-19-2012 05:32
Upload & Download Eprom	Lousangeles	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	09-16-2011 13:43
Nokia 5110 & 6110 Schemics	MyKy	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	08-06-1999 08:36
i can unlock nokia 51xx/61xx sp locks 1,2,3,4 £40 each £30 bulk for u.k only	spterminator	Main Sales Section	0	08-01-1999 05:46

03-08-2011, 18:35	#62 (permalink)
kamel928 Freak Poster Join Date: Jul 2006 Location: WORLDWIDE Posts: 267 Member: 306407 Status: Offline Thanks: 16 Thanked 31 Times in 23 Posts	hello i have big probleme with fenix after one weak waited!! fenix sl3 said me BAD DATA PHONE or something else and now restart calcultaion from 0 :s whyyyyyyyyyyyy??? please how to resume ???

03-08-2011, 18:44	#63 (permalink)
kamel928 Freak Poster Join Date: Jul 2006 Location: WORLDWIDE Posts: 267 Member: 306407 Status: Offline Thanks: 16 Thanked 31 Times in 23 Posts	just in 100% it's said that!!!!!!!!!!!!!!!!

03-21-2011, 11:13	#68 (permalink)
Andrew_n10 Major Poster Join Date: Jun 2005 Age: 28 Posts: 48 Member: 152024 Status: Online Thanks: 9 Thanked 6 Times in 3 Posts	Software version: 1.0.5 Detected card sn: AABA97CD2FF7 Card version: 00.08 Life counter: 99,73% Fenix Reader SW version: 0.0.2 Connection interface is set to USB now. Connecting to UFS3 SarasSoft #1 (SN: 132859) UFxBoot V2.2 (c) SarasSoft 2003 UFS_USB V2.8 (c) SarasSoft 2007 Connected to UFS interface. Connection interface is set to UFS now. Job's finished successfully! SL3 Unlocking started Setting flash mode Reading CMT boot data... Cannot get phone boot info. Please make sure that phone is connected and you are using a high quality cable Job's finished with errors! SL3 Unlocking started Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600000001020C192102044100 Public ID : 2D200204125200492FC22457F9B2B3D7B0B6BD07 Hash : 7B045400E1752022F9EB80B0DEA9C65D Hardware ID: 020C192102044100 Sending 2ND... Cannot initialize booting 2ND Job's finished with errors! Nokia 7230 SL3 FB, not work

04-08-2011, 06:53	#72 (permalink)
speed infotech No Life Poster Join Date: Feb 2007 Posts: 923 Member: 449060 Status: Offline Thanks: 101 Thanked 180 Times in 127 Posts	n79 read pm error Software version: 1.0.6 Detected card sn: xxxxxxxxxx Card version: 00.09 Life counter: 89.87% Fenix Reader SW version: 0.0.2 Connection interface is set to USB now. Checking connection... Reading phone info Product type: RM-348 MCU SW Version: V ICPR72_09w18.4 14-10-09 RM-348 (c) Nokia Imei: Product code: 0577234 Simlock status: Profile bits: 0000000000000000 Config key: 2440700000000000 Fbus codes typed: 0 Key codes typed: 0 Block 1: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 2: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 3: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 4: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 5: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 6: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 7: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Looking for flash files No flash files found for selected product Job's finished successfully! Checking connection... Reading PM Field received. ID = 1 Field received. ID = 2 Field received. ID = 4 Field received. ID = 8 Field received. ID = 11 Field received. ID = 12 Field received. ID = 31 Field received. ID = 44 Field received. ID = 50 Field received. ID = 54 Field received. ID = 88 Field received. ID = 96 Field received. ID = 107 An error occurred: Device communication timeout occurred Job's finished with errors! ------------------------------------------ fleshin error Checking connection... Reading phone info Product type: RM-348 MCU SW Version: V ICPR72_09w18.4 14-10-09 RM-348 (c) Nokia Imei: xxxxxxxxxxxxxxxxx Product code: 0577234 Simlock status: Profile bits: 0000000000000000 Config key: 2440700000000000 Fbus codes typed: 0 Key codes typed: 0 Block 1: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 2: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 3: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 4: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 5: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 6: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 7: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Looking for flash files No flash files found for selected product Job's finished successfully! Flashing started Battery voltage: 3954mV Reading important PM fields Checking connection Field received. ID = 120 Could not read SIMLOCK data. Flashing is being continued. Communication error Job's finished with errors!

04-19-2011, 17:04	#73 (permalink)
tavoonly No Life Poster Join Date: Sep 2007 Location: In front of my pc Posts: 548 Member: 586318 Status: Offline Thanks: 237 Thanked 93 Times in 53 Posts	Hi, I'm a new user and I'm facing a problem with Fenix key. When I tried to select the path on which the flashing files are located the software just freeze out and cannot make anything on it. Is there anyway to solve this problem?