GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Fenix Key
Reload this Page Post here your Success Stories with FENIX KEY
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 3 of 29 12 3 45613 Last »
 
LinkBack Thread Tools Display Modes
Old 12-14-2010, 21:02   #31 (permalink)
No Life Poster
 
leonize's Avatar
 
Join Date: Aug 2009
Location: USA
Posts: 530
Member: 1096162
Status: Offline
Thanks Meter: 411
Flash successfully

Service: Flash
Method: Dead usb
Model: 5310

To become a living
Software version: 0.9.7
Detected card sn: GSM-TRADER
Card version: 00.05
Life counter: 99.54%
Fenix Reader SW version: 0.0.1
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 010DFFFF
Erasing CMT area 010E0000 - 0121FFFF
Erasing PPM Flash area
Erasing CMT area 01220000 - 0189FFFF
Erasing CNT Flash area
Erasing CMT area 018A0000 - 01B1FFFF
Erasing CMT area 01B20000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code [SKIPPED]
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-304
MCU SW Version:
V 09.42
07-11-08
RM-304
(c) Nokia
PPM Version:
V 09.42
07-11-08
RM-303
(c) Nokia
L
Content Pack Version:
Content: l_red TELCEL v1
07-10-07
RM-304
(c) Nokia.
Imei: 354195020372280
Product code: 0557167
Simlock status:
Profile bits: 8000000000000000
Config key: 3340309996332460
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 3F

Block 2:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 70 40 3F

Block 3:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 70 60 4F

Block 4:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 71 03 0F

Block 5:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 71 40 2F

Block 6:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 73 00 2F

Block 7:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 20 7F

Block 8:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 73 21 2F

Block 9:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 00 0F

Block 10:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 80 7F

Block 11:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 21 40 7F

Block 12:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 21 40 2F

Looking for flash files
Flash files found for selected product
Job's finished successfully!
Baruck
  Reply With Quote
The Following 2 Users Say Thank You to leonize For This Useful Post:
Old 12-15-2010, 01:09   #32 (permalink)
No Life Poster
 
leonize's Avatar
 
Join Date: Aug 2009
Location: USA
Posts: 530
Member: 1096162
Status: Offline
Thanks Meter: 411
Flash successfully
Service: Flash
Method: Dead Usb
Model: 7610 supernova

Again To become a living
Software version: 0.9.7
Detected card sn: GSM-TRADER
Card version: 00.05
Life counter: 99.12%
Fenix Reader SW version: 0.0.1
Looking for flash files
No flash files found for selected product
Looking for flash files
No flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 014DFFFF
Erasing CMT area 014E0000 - 0167FFFF
Erasing PPM Flash area
Erasing CMT area 01680000 - 01F1FFFF
Erasing CNT Flash area
Erasing CMT area 01F20000 - 022BFFFF
Erasing CMT area 022C0000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code [SKIPPED]
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-354
MCU SW Version:
V 07.23
17-07-09
RM-354
(c) Nokia
PPM Version:
V 07.23
17-07-09
RM-354
(c) Nokia
L
Content Pack Version:
Content: l_claro_cl_white
V 07.23
17-07-09
RM-354
(c) Nokia
Imei: 356405021430427
Product code: 0568909
Simlock status:
Profile bits: B000000000000000
Config key: 3340201549764300
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 20

Looking for flash files
No flash files found for selected product
Job's finished successfully!
Baruck

PD: I use flash by official support FENIX-KEY
  Reply With Quote
The Following 2 Users Say Thank You to leonize For This Useful Post:
Old 12-15-2010, 06:27   #33 (permalink)
No Life Poster
 
R@ZIB-BD's Avatar
 
Join Date: Mar 2008
Location: China/USA
Posts: 2,717
Member: 718425
Status: Offline
Thanks Meter: 5,873
Software version: 0.9.6
Detected card sn: 0000000000F
Card version: 00.04
Life counter: 98.88%
Looking for flash files
Flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00020000 - 0007FFFF
Erasing CMT area 00080000 - 000DFFFF
Erasing CMT area 00100000 - 001FFFFF
Erasing CMT area 00200000 - 0031FFFF
Erasing CMT area 00320000 - 0105FFFF
Erasing CMT area 01060000 - 01067FFF
Erasing CMT area 01068000 - 0107FFFF
Erasing PPM Flash area
Erasing CMT area 01080000 - 0151FFFF
Erasing CNT Flash area
Erasing CMT area 01520000 - 01FDFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Sending PMM_CONF
Sending SBIF_CONF
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0544311
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-237
MCU SW Version:
V 07.30
07-05-09
RM-237
(c) Nokia.
PPM Version:
V 07.30
07-05-09
RM-237
(c) Nokia.
C
Imei: 353183035503751
Product code: 0544311
Simlock status:
Profile bits: 0000000000000000
Config key: 2440700000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 2:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 3:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 4:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 5:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 6:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 7:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Looking for flash files
Flash files found for selected product
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to R@ZIB-BD For This Useful Post:
Old 12-15-2010, 07:09   #34 (permalink)
No Life Poster
 
R@ZIB-BD's Avatar
 
Join Date: Mar 2008
Location: China/USA
Posts: 2,717
Member: 718425
Status: Offline
Thanks Meter: 5,873
Software version: 0.9.6
Detected card sn: 100000AF
Card version: 00.04
Life counter: 98.62%
Looking for flash files
Flash files found for selected product
No phone found
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00020000 - 0007FFFF
Erasing CMT area 00080000 - 000DFFFF
Erasing CMT area 00100000 - 001FFFFF
Erasing CMT area 00200000 - 0031FFFF
Erasing CMT area 00320000 - 0105FFFF
Erasing CMT area 01060000 - 01067FFF
Erasing CMT area 01068000 - 0107FFFF
Erasing PPM Flash area
Erasing CMT area 01080000 - 0151FFFF
Erasing CNT Flash area
Erasing CMT area 01520000 - 01FDFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Sending PMM_CONF
Sending SBIF_CONF
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0548999
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-272
MCU SW Version:
V 07.21
05-11-08
RM-272
(c) Nokia.
PPM Version:
V 07.21
05-11-08
RM-272
(c) Nokia.
A
Imei: 352041021816622
Product code: 0548999
Simlock status:
Profile bits: 0000000000000000
Config key: 2440700000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 2:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 3:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 4:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 5:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 6:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 7:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Looking for flash files
Flash files found for selected product
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to R@ZIB-BD For This Useful Post:
Old 12-15-2010, 13:36   #35 (permalink)
No Life Poster
 
rotelcam's Avatar
 
Join Date: Feb 2008
Location: SPAIN
Posts: 1,874
Member: 698210
Status: Offline
Sonork: 100.1578921
Thanks Meter: 3,591
Donate money to this user
E55 RM-482 dead revived ok.
Code:
Software version: 0.9.7
Detected card sn: C95XXXXXXXXX
Card version: 00.05
Life counter: 98.85%
Fenix Reader SW version: 0.0.1
Looking for flash files
Flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
CMT Hash : 25B977A055BE9B5DEC0C38A2A279C695
CMT Hw ID: 600C192102011104
Preparing bootstrap to use USB BootMedia
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Reading certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Documents and Settings\Roland\My Documents\Lavarow\Fenix\Backup\Certs\12-15-2010 1-24-26 PM000000030000022600010007600C192102011104-12-15-2010 1-24-26 PM.rpl
Checking software version
Partitioning file: rm482_034.001_prd.core.fpsx
Erasing MCUSW Flash area
Erasing CMT area 00020000 - 0003FFFF
Erasing CMT area 00060000 - 004DFFFF
Erasing CMT area 008E0000 - 0B0FFFFF
Erasing CMT partition
Erasing PPM Flash area
Erasing CMT area 07400000 - 09CBFFFF
Erasing CNT Flash area
Erasing CMT area 004E0000 - 008DFFFF
Erasing CMT area 0B100000 - 0F27FFFF
Erasing CMT area 09CC0000 - 0B0FFFFF
Flashing MCUSW
Sending ADA
Sending KEYS
Sending PRIMAPP
Sending RAP3NAND
Sending SOS+PMML
Sending PASUBTOC
MCU PAPUBKEYS are missing, sending first available block
Sending PAPUBKEYS
Sending GENIO_INIT
Sending SOS*UPDAPP
Sending SOS*DSP0
Sending LDSP
Sending SOS*ISASW
Sending SOS+CORE
Sending SOS+ROFS1
2 seconds delay between flash files
Flashing PPM
Sending SOS+ROFS2
2 seconds delay between flash files
Flashing CNT
Sending SOS*ENO
Flashing additional files
Flashing rm482_034.001_U000.000_prd.uda.fpsx
2 seconds delay between flash files
Flashing rm482_034.001_C00.01_DEFAULT_prd.rofs3.fpsx
Sending SOS+ROFS3
2 seconds delay between flash files
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0568630
Setting NORMAL MODE
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to rotelcam For This Useful Post:
Old 12-15-2010, 16:37   #36 (permalink)
No Life Poster
 
el-polaco's Avatar
 
Join Date: Jun 2009
Location: SouthAmericaUnlockers
Age: 52
Posts: 2,638
Member: 1057178
Status: Offline
Sonork: Kfe~Labs Co.-
Thanks Meter: 568
AnOther 5130 RM-495

lashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 0137FFFF
Erasing CMT area 01380000 - 0151FFFF
Erasing PPM Flash area
Erasing CMT area 01520000 - 01DBFFFF
Erasing CNT Flash area
Erasing CMT area 01DC0000 - 0215FFFF
Erasing CMT area 02160000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0579017
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-495
MCU SW Version:
V 07.96
20-05-10
RM-495
(c) Nokia
PPM Version:
V 07.96
20-05-10
RM-495
(c) Nokia
MR
Content Pack Version:
Content: mr_red
V 07.96
20-05-10
RM-495
(c) Nokia
Imei: 35xx2290397759xx
Product code: 0579017
Simlock status:
Profile bits: 8000000000000000
Config key: 7223100000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 10

Block 2:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 81 0F

Block 3:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 40 2F

Looking for flash files
Flash files found for selected product
Job's finished successfully!


Is really Fast....(RM-495)

Regards


Poliish
  Reply With Quote
The Following 2 Users Say Thank You to el-polaco For This Useful Post:
Old 12-15-2010, 19:06   #37 (permalink)
No Life Poster
 
leonize's Avatar
 
Join Date: Aug 2009
Location: USA
Posts: 530
Member: 1096162
Status: Offline
Thanks Meter: 411
Flash successfully
Service: Flash
Method: Normal Mode
Model: 5200
Software version: 0.9.7
Detected card sn: GSM-TRADER
Card version: 00.05
Life counter: 98.74%
Fenix Reader SW version: 0.0.1
Reading phone info
Product type: RM-174
MCU SW Version:
V 04.72
26-03-07
RM-174
(c) Nokia.
PPM Version:
V 04.72
26-03-07
RM-174
(c) Nokia.
L
Content Pack Version:
Content: l
V 04.72
26-03-07
RM-174
(c) Nokia.
Imei: 359803010530941
Product code: 0542059
Simlock status:
Profile bits: 3000000000000000
Config key: 3340201549764300
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 20

Block 2:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 20

Looking for flash files
Flash files found for selected product
Job's finished successfully!
Flashing started
Battery voltage: 3812mV
Reading important PM fields
Field received. ID = 308
PM backup saved as: C:\Documents and Settings\Baruck\Mis documentos\Lavarow\Fenix\Backup\Pm\359803010530941-15-12-2010 11-24-51 a.m..pm
CMT Flash: SAMSUNG (SEC) - K8F5615ETM / K5G5629ATD
Extracting loaders from flash files
Sending CMT loader
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00020000 - 0007FFFF
Erasing CMT area 00080000 - 000DFFFF
Erasing CMT area 00100000 - 001FFFFF
Erasing CMT area 00200000 - 0031FFFF
Erasing CMT area 00320000 - 0105FFFF
Erasing CMT area 01060000 - 01067FFF
Erasing CMT area 01068000 - 0107FFFF
Erasing PPM Flash area
Erasing CMT area 01080000 - 014FFFFF
Erasing CNT Flash area
Erasing CMT area 01500000 - 01FDFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Sending PMM_CONF
Sending SBIF_CONF
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Converting CNT 64kb-page file to 128kb-page file
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code [SKIPPED]
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-174
MCU SW Version:
V 06.03
25-03-08
RM-174
(c) Nokia.
PPM Version:
V 06.03
25-03-08
RM-174
(c) Nokia.
L
Content Pack Version:
Content: l Telcel Post 001
21-09-07
RM-181
(c) Nokia.
Imei: 359803010530941
Product code: 0542059
Simlock status:
Profile bits: 3000000000000000
Config key: 3340201549764300
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 20

Block 2:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 20

Looking for flash files
Flash files found for selected product
Job's finished successfully!
Baruck
  Reply With Quote
The Following 2 Users Say Thank You to leonize For This Useful Post:
Old 12-15-2010, 19:36   #38 (permalink)
No Life Poster
 
leonize's Avatar
 
Join Date: Aug 2009
Location: USA
Posts: 530
Member: 1096162
Status: Offline
Thanks Meter: 411
Flash successfully
Service: Flash
Method: Normal Mode
Model: 5130
Reading phone info
Product type: RM-495
MCU SW Version:
V 06.65
01-04-09
RM-495
(c) Nokia
PPM Version:
V 06.65
01-04-09
RM-495
(c) Nokia
UA
Content Pack Version:
Content: ua_blu_telcel_mxo_bl
V 06.65
01-04-09
RM-495
(c) Nokia
Imei: 358276038077347
Product code: 0594447
Simlock status:
Profile bits: B000000000000000
Config key: 3340201549764300
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 20

Looking for flash files
No flash files found for selected product
Job's finished successfully!
Looking for flash files
No flash files found for selected product
Flashing started
Battery voltage: 3787mV
Reading important PM fields
Field received. ID = 120
Field received. ID = 308
PM backup saved as: C:\Documents and Settings\Baruck\Mis documentos\Lavarow\Fenix\Backup\Pm\358276038077347-15-12-2010 12-14-10 p.m..pm
CMT Flash: SPANSION - Unknown product
Extracting loaders from flash files
Sending CMT loader
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 0137FFFF
Erasing CMT area 01380000 - 0151FFFF
Erasing PPM Flash area
Erasing CMT area 01520000 - 01DBFFFF
Erasing CNT Flash area
Erasing CMT area 01DC0000 - 0215FFFF
Erasing CMT area 02160000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code [SKIPPED]
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-495
MCU SW Version:
V 07.91
29-10-09
RM-495
(c) Nokia
PPM Version:
V 07.91
29-10-09
RM-495
(c) Nokia
AA
Content Pack Version:
Content: aa_red_ctv_dk_red
V 07.91
29-10-09
RM-495
(c) Nokia
Imei: 358276038077347
Product code: 0594447
Simlock status:
Profile bits: B000000000000000
Config key: 3340201549764300
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 20

Looking for flash files
No flash files found for selected product
Job's finished successfully!
Baruck
  Reply With Quote
The Following 2 Users Say Thank You to leonize For This Useful Post:
Old 12-15-2010, 20:25   #39 (permalink)
No Life Poster
 
Lavarow's Avatar
 
Join Date: Dec 2008
Location: UK
Age: 41
Posts: 1,902
Member: 922305
Status: Offline
Sonork: 100.1580089
Thanks Meter: 8,995
NOKIA E66 RM-343

Code:
Flashing started
Battery voltage: 3926mV
Reading important PM fields
Field received. ID = 120
Field received. ID = 308
PM backup saved as: C:\Users\R\Documents\Lavarow\Fenix\Backup\Pm\35xxxxxxxxxxxxx-2010-12-15 20-12-55.pm
CMT Flash: SAMSUNG (SEC) - KAT00F00RA
Setting flash mode
CMT Hash : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT Hw ID: 400C192101031103
CMT Papubkeys: 96B8EDD55BE6A0011D2BA3B5A4D8D82F
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Checking software version
Partitioning file: rm343_200.21.118_prd.c00
Erasing MCUSW Flash area
Erasing CMT area 00040000 - 007FFFFF
Erasing CMT area 00A00000 - 0759FFFF
Erasing CMT area 0F1C0000 - 0F8BFFFF
Erasing CMT partition
Erasing CMT partition
Erasing CMT partition
Erasing PPM Flash area
Erasing CMT area 05420000 - 0759FFFF
Erasing CMT partition
Erasing CNT Flash area
Erasing CMT partition
Flashing MCUSW
Sending ADA
Sending KEYS
Sending PRIMAPP
Sending RAP3NAND
Sending PASUBTOC
Sending PAPUBKEYS
Sending SOS*UPDAPP
Sending SOS*DSP0
Sending SOS*ISASW
Sending SOS*CORE
Sending SOS+ROFS
2 seconds delay between flash files
Flashing PPM
Sending SOS+ROFX
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0569050
Setting NORMAL MODE
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to Lavarow For This Useful Post:
Old 12-15-2010, 21:47   #40 (permalink)
No Life Poster
 
Lavarow's Avatar
 
Join Date: Dec 2008
Location: UK
Age: 41
Posts: 1,902
Member: 922305
Status: Offline
Sonork: 100.1580089
Thanks Meter: 8,995
NOKIA 6303 Classic RM-443 Dead USB (other boxes cant flash this phone)

Code:
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 0001FFFF
Erasing CMT area 00040000 - 0005FFFF
Erasing CMT area 00060000 - 0007FFFF
Erasing CMT area 00080000 - 0015FFFF
Erasing CMT area 00160000 - 0023FFFF
Erasing CMT area 01740000 - 0191FFFF
Erasing CMT area 00240000 - 0173FFFF
Erasing CMT area 022E0000 - 0261FFFF
Erasing PPM Flash area
Erasing CMT area 01920000 - 022DFFFF
Erasing CNT Flash area
Erasing CMT area 02620000 - 029BFFFF
Erasing CMT area 029C0000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Sending ISA+DYNSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0588025
Setting NORMAL MODE
Job's finished successfully!
Last edited by Lavarow; 12-15-2010 at 23:34.
  Reply With Quote
The Following 2 Users Say Thank You to Lavarow For This Useful Post:
Old 12-15-2010, 22:05   #41 (permalink)
No Life Poster
 
Lavarow's Avatar
 
Join Date: Dec 2008
Location: UK
Age: 41
Posts: 1,902
Member: 922305
Status: Offline
Sonork: 100.1580089
Thanks Meter: 8,995
NOKIA 3600 Slide RM-352

Code:

Flashing started
Battery voltage: 4130mV
Reading important PM fields
Field received. ID = 120
Field received. ID = 308
PM backup saved as: C:\Users\R\Documents\Lavarow\Fenix\Backup\Pm\35xxxxxxxxxxxxx-2010-12-15 21-55-40.pm
CMT Flash: SAMSUNG (SEC) - K5G1257ATM
Extracting loaders from flash files
Sending CMT loader
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 014DFFFF
Erasing CMT area 014E0000 - 0167FFFF
Erasing PPM Flash area
Erasing CMT area 01680000 - 01F1FFFF
Erasing CNT Flash area
Erasing CMT area 01F20000 - 022BFFFF
Erasing CMT area 022C0000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0561998
Setting NORMAL MODE
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to Lavarow For This Useful Post:
Old 12-15-2010, 22:55   #42 (permalink)
No Life Poster
 
Lavarow's Avatar
 
Join Date: Dec 2008
Location: UK
Age: 41
Posts: 1,902
Member: 922305
Status: Offline
Sonork: 100.1580089
Thanks Meter: 8,995
NOKIA E52 RM-469

Code:

Flashing started
Battery voltage: 4076mV
Reading important PM fields
Field received. ID = 120
Field received. ID = 308
PM backup saved as: C:\Users\R\Documents\Lavarow\Fenix\Backup\Pm\35xxxxxxxxxxxxx-2010-12-15 22-51-11.pm
CMT Flash: ST - Unknown product
Setting flash mode
CMT Hash : 25B977A055BE9B5DEC0C38A2A279C695
CMT Hw ID: 600C192102011104
CMT Papubkeys: 85F252E351E225CAFC4DFBC8041EABD2
Preparing bootstrap to use USB BootMedia
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Reading certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Users\R\Documents\Lavarow\Fenix\Backup\Certs\2010-12-15 22-51-24000000030000022600010007600C192102011104-2010-12-15 22-51-24.rpl
Checking software version
Partitioning file: rm469_033.002_prd.core.fpsx
Erasing MCUSW Flash area
Erasing CMT area 00020000 - 0003FFFF
Erasing CMT area 00060000 - 004DFFFF
Erasing CMT area 008E0000 - 0B13FFFF
Erasing CMT partition
Erasing PPM Flash area
Erasing CMT area 07340000 - 09CFFFFF
Erasing CNT Flash area
Erasing CMT area 004E0000 - 008DFFFF
Erasing CMT area 0B140000 - 0F27FFFF
Erasing CMT area 09D00000 - 0B13FFFF
Flashing MCUSW
Sending ADA
Sending KEYS
Sending PRIMAPP
Sending RAP3NAND
Sending SOS+PMML
Sending PASUBTOC
Sending PAPUBKEYS
Sending GENIO_INIT
Sending SOS*UPDAPP
Sending SOS*DSP0
Sending LDSP
Sending SOS*ISASW
Sending SOS+CORE
Sending SOS+ROFS1
2 seconds delay between flash files
Flashing PPM
Sending SOS+ROFS2
2 seconds delay between flash files
Flashing CNT
Sending SOS*ENO
Flashing additional files
Flashing rm469_033.002_U000.000_prd.uda.fpsx
2 seconds delay between flash files
Flashing rm469_033.002_C00.01_DEFAULT_prd.rofs3.fpsx
Sending SOS+ROFS3
2 seconds delay between flash files
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0591678
Setting NORMAL MODE
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to Lavarow For This Useful Post:
Old 12-15-2010, 23:34   #43 (permalink)
No Life Poster
 
Lavarow's Avatar
 
Join Date: Dec 2008
Location: UK
Age: 41
Posts: 1,902
Member: 922305
Status: Offline
Sonork: 100.1580089
Thanks Meter: 8,995
NOKIA 6210 Navigator RM-367

Code:

Flashing started
Battery voltage: 4063mV
Reading important PM fields
Field received. ID = 120
Field received. ID = 308
PM backup saved as: C:\Users\R\Documents\Lavarow\Fenix\Backup\Pm\35xxxxxxxxxxxxx-2010-12-15 23-31-23.pm
CMT Flash: SAMSUNG (SEC) - KAT00F00RA
Setting flash mode
CMT Hash : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT Hw ID: 400C192101031103
CMT Papubkeys: 4AA07663215C623237BF8A43EC71D558
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Checking software version
Partitioning file: rm367_05.16_prd_core.fpsx
Erasing MCUSW Flash area
Erasing CMT area 00040000 - 00082FFF
Erasing CMT area 00083400 - 0087FFFF
Erasing CMT area 00B80000 - 080FFFFF
Erasing CMT partition
Erasing PPM Flash area
Erasing CMT area 053E0000 - 078FFFFF
Erasing CNT Flash area
Erasing CMT area 08100000 - 0F8BFFFF
Erasing CMT area 07900000 - 080FFFFF
Flashing MCUSW
Sending ADA
Sending KEYS
Sending PRIMAPP
Sending RAP3NAND
Sending PASUBTOC
Sending PAPUBKEYS
Sending SOS*UPDAPP
Sending SOS*DSP0
Sending SOS*ISASW
Sending SOS+CORE
Sending SOS+ROFS1
2 seconds delay between flash files
Flashing PPM
Sending SOS+ROFS2
2 seconds delay between flash files
Flashing CNT
Flashing additional files
Flashing rm367_05.16_prd_vc00_01_Navigator.fpsx
Sending SOS+ROFS3
2 seconds delay between flash files
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0557273
Setting NORMAL MODE
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to Lavarow For This Useful Post:
Old 12-15-2010, 23:54   #44 (permalink)
No Life Poster
 
Lavarow's Avatar
 
Join Date: Dec 2008
Location: UK
Age: 41
Posts: 1,902
Member: 922305
Status: Offline
Sonork: 100.1580089
Thanks Meter: 8,995
NOKIA 5610 RM-242

Code:

Reading phone info
Product type: RM-242
MCU SW Version: 
	V 10.00
	06-03-09
	RM-242
	(c) Nokia            
PPM Version: 
	V 10.00
	06-03-09
	RM-242
	(c) Nokia            
	b
Content Pack Version: 
	Content: blue_b
	V 10.00
	06-03-09
	RM-242
	(c) Nokia            
Imei: 35xxxxxxxxxxxxx
Product code: 0552279
Simlock status:
Profile bits: 8000000000000006
Config key: 2440700000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
	Lock 1:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF 
	Lock 2:  OPEN(GID1); TYPE: 1; DATA: FF FF 
	Lock 3:  OPEN(GID2); TYPE: 1; DATA: FF FF 
	Lock 4:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 
	Lock 5:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 

Block 2:
	Lock 1:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF 
	Lock 2:  OPEN(GID1); TYPE: 1; DATA: FF FF 
	Lock 3:  OPEN(GID2); TYPE: 1; DATA: FF FF 
	Lock 4:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 
	Lock 5:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 

Block 3:
	Lock 1:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF 
	Lock 2:  OPEN(GID1); TYPE: 1; DATA: FF FF 
	Lock 3:  OPEN(GID2); TYPE: 1; DATA: FF FF 
	Lock 4:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 
	Lock 5:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 

Block 4:
	Lock 1:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF 
	Lock 2:  OPEN(GID1); TYPE: 1; DATA: FF FF 
	Lock 3:  OPEN(GID2); TYPE: 1; DATA: FF FF 
	Lock 4:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 
	Lock 5:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 

Block 5:
	Lock 1:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF 
	Lock 2:  OPEN(GID1); TYPE: 1; DATA: FF FF 
	Lock 3:  OPEN(GID2); TYPE: 1; DATA: FF FF 
	Lock 4:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 
	Lock 5:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 

Block 6:
	Lock 1:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF 
	Lock 2:  OPEN(GID1); TYPE: 1; DATA: FF FF 
	Lock 3:  OPEN(GID2); TYPE: 1; DATA: FF FF 
	Lock 4:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 
	Lock 5:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 

Block 7:
	Lock 1:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF 
	Lock 2:  OPEN(GID1); TYPE: 1; DATA: FF FF 
	Lock 3:  OPEN(GID2); TYPE: 1; DATA: FF FF 
	Lock 4:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 
	Lock 5:  OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF 

Looking for flash files
Flash files found for selected product
Job's finished successfully!
Flashing started
Battery voltage: 4066mV
Reading important PM fields
Field received. ID = 120
Field received. ID = 308
PM backup saved as: C:\Users\R\Documents\Lavarow\Fenix\Backup\Pm\35xxxxxxxxxxxxx-2010-12-15 23-43-21.pm
CMT Flash: SAMSUNG (SEC) - K5G1257ATM
Extracting loaders from flash files
Sending CMT loader
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 01480000 - 015FFFFF
Erasing CMT area 00140000 - 0147FFFF
Erasing PPM Flash area
Erasing CMT area 01600000 - 01CBFFFF
Erasing CNT Flash area
Erasing CMT area 01FC0000 - 03F9FFFF
Erasing CMT area 01CC0000 - 01FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0552279
Setting NORMAL MODE
Job's finished successfully!
  Reply With Quote
The Following 2 Users Say Thank You to Lavarow For This Useful Post:
Old 12-16-2010, 00:00   #45 (permalink)
No Life Poster
 
leonize's Avatar
 
Join Date: Aug 2009
Location: USA
Posts: 530
Member: 1096162
Status: Offline
Thanks Meter: 411
Other more 5310
Process: FLash
Method: DEAD USB
Model: 5310

to come back to life
Software version: 0.9.7
Detected card sn: GSM-TRADERS
Card version: 00.05
Life counter: 97.89%
Fenix Reader SW version: 0.0.1
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 010DFFFF
Erasing CMT area 010E0000 - 0121FFFF
Erasing PPM Flash area
Erasing CMT area 01220000 - 0189FFFF
Erasing CNT Flash area
Erasing CMT area 018A0000 - 01B1FFFF
Erasing CMT area 01B20000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code [SKIPPED]
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-304
MCU SW Version:
V 09.42
07-11-08
RM-304
© Nokia
PPM Version:
V 09.42
07-11-08
RM-303
© Nokia
L
Content Pack Version:
Content: l_red TELCEL v1
07-10-07
RM-304
© Nokia.
Imei: 358990016371817
Product code: 0557167
Simlock status:
Profile bits: 8000000000000000
Config key: 3340309996332460
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 33 40 3F

Block 2:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 70 40 3F

Block 3:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 70 60 4F

Block 4:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 71 03 0F

Block 5:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 71 40 2F

Block 6:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 73 00 2F

Block 7:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 20 7F

Block 8:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 73 21 2F

Block 9:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 00 0F

Block 10:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 80 7F

Block 11:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 21 40 7F

Block 12:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 21 40 2F

Looking for flash files
Flash files found for selected product
Job's finished successfully!
Baruck
  Reply With Quote
The Following User Says Thank You to leonize For This Useful Post:
Reply
Page 3 of 29 12 3 45613 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DES key Driver black Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 8 02-08-2014 04:50
Phone Stuff for FREE & KEy-GEn For Logo Editor ! BoNtEk - ThA WtC MeMbA Nokia Multimedia 8 10-31-2012 20:17
Help with 6110 paulomt1 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 2 05-25-2009 16:29
Netmonitor with FBus???? ratzfatz Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 4 06-09-1999 17:04

 



All times are GMT +1. The time now is 22:43.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.41145 seconds with 10 queries

SEO by vBSEO