FIS+ / FIS+ Advanced : New Update v0.2.1 (FINAL version)

[The_Gorr]

FEATURES
-----------------------------------------
- Solved battery drain problem.
- Solved a problem that didn't identify the Confort ECU.
- Solved all coding funtions of Confort ECU, such as Rain closing, 20 Kmh closing and one touch closing.
- Improved all coding functions.
- Solved problem with accelerator pedal that makes crash the Polar FIS menu.
- Solved problem with Intake temp that shows negative value.
- Improved communication between box processors.
- Improved communication functions to parameters from the diagnostics bus.
- Improved Polar FIS menu stability.
- Add OPS Parktronic emulation (BETA).
- Added a new option for mirror lowering for cars that this function doesn't work before (BETA)
- Added a new option for modified engines with more power than stock. Enter the Polar FIS configuration menu and navigate to SCREEN->VISUALIZATION->ADVANCED-> TORQUE ADJUST. In Stock torque introduce the stock torque of your car and in New torque, introduce the car torque that the car have now. That will calculate a conversion factor to show the torque and power of your car after the modification.
- Improved German Language texts.
- Improved Parktronic emulation.
- Solved problem with coding of rain and light sensors that makes that was impossible to reach 255, that is the maximiun value.
- Solved problem that makes to register a error in the gateway (sporadic telematics communication error).gateway.
- Improved Parktronic emulation.
- Revised german texts.
- Added a new option to configure desktop for 4 parameters. Go to the Polar FIS configuration menu SCREEN->VISUALIZATION->SCREEN x->PARAMETER QTY. and select 4, 5 or 6.
- Still in TO-DO list some texts and other functions (for add in next updates)
- Updated german language texts.
- Solved problem with switch off Polar FIS function, now it works.


IMPORTANT
-----------------------------------------
The Parktronic OPS emulation option is designed for cars that have equipped RNS-510 and can not see in it the Parktronic sensors. If you already see the sensors on RNS-510 display, please avoid to activate the emulation.
The Parktronic OPS emulation need to activate the module 10 in the CAN Gateway, that is only available on gateways after F model (F included), if you try to activate that function with a older gateway a error message will be displayed indicating that this function is not avilable.
To activate the Parktronic OPS emulation, access to the Polar FIS configuration menu, and navigate to CONFORT->PARKTRONIC, there, you can activate it.

In Skoda vehicles, there is no problem because parktronic module send messages to the sensors, but in the other brands this messages arent sent and for the moment this disable Parktronic OPS emulation. So this means this feature only will be available in Skoda vehicles.

A new function called Alt. mode is added inside the mirror configuration screen (CONFIGURATION MENU->CONFORT->MIRRORS). This function is only for users that the mirror lowering doesn't work in older versions. If mirrors works with older versions, it's not recommended to activate it.
In vehicles that doesn't work before, activate Alt. Mode, and after that, configure mirror positions, finally select the mode and test if it works now.

Please, take note that Parktronic OPS emulation firmware as weel as the new mode for mirror lowering is actually under development, they're tested and works without problem, but we are still working on that, so if you find any problem, please post it here to solve it.


HOW TO INSTALL
-----------------------------------------
For install this update, please use ActiveX from our official web www.AUTO-POLAR.com (Section Update Zone)




With best regards,
Http://www.Auto-Polar.com

[Malik Irfan85]

Nice solution Polar box team.

[HI - TECHNOLOGY]

good work keep it up polar team

br
HI-TECH

[iftikhar_246]

good work best of luck

[umarnlw]

nice update and keep it more up

[vive01]

Nice solution Polar box team.