Post Here All Readed Flash Files With GPGDragon ! - Page 85 - GSM-Forum

john nison · 08-10-2011, 05:25

I need file G6620
Thanks

bukharimobiles · 08-10-2011, 14:17

please send me cright l1000 flashfile urgent . [email protected]

iamsreekanthk · 08-13-2011, 06:40

Sorry for double post

iamsreekanthk · 08-13-2011, 06:45

Code:

 Initializing...
 DA_LIB_VER_3.5.0.2
 It is sensing the pinout fast...
 RXD=4  TXD=7
 Connecting...
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6600700100026A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 921600 ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L2      Flash: NOR_TV00570002xDGB
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...
 File System Ver: 0A
 IMEI 1=356407040334564
 IMEI 2=356407040535160
 --------NOR_FLASH_CONFIG--------
 Flash Bank count=1
 EFS sector count=15
 File sector count=2
 Sector size=0x00010000
 Flash start addr=0x00000000
 Flash size=0x01000000
 Fix NV addr=0x00EE0000
 Product information addr=0x00FF0000
 MMI resource addr=0x00980000
 ------Auto Format Address-------
 Start=0x00F00000
 Size =0x000F0000
 Read FS info...done

glx model:A101 16MB

iamsreekanthk · 08-13-2011, 07:19

karbonn k445 flashe file 16mb

Code:

 Initializing...
 DA_LIB_VER_3.5.0.2
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=9  TXD=7
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6223,    HardwareVer:8A05,    SoftwareVer:8A00
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 0098000300000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: L100B_00A9_V1_0_5

DILDIL-PAKISTAN · 08-18-2011, 04:49

i need this phone flash file plz give me file if u have
more info this
HX_PROJECT_PCB01_GPRS_MT6253_S00.H8_V08_MLT1_QQX_1 10303_NEW.BIN_FLNS71VS128RB0AHK0L0

RCB Telecom · 08-18-2011, 07:55

c5000 spedtrium needed full back up.................................

Faheem Anjum · 08-20-2011, 07:15

1130 3 sim spd flash files here :Download 1130.zip from Mirrorcreator - Upload files to multiple file sharing sites

rajakhank3 · 08-20-2011, 11:57

need gild u3 flash file pls if any body have share thanks in advanced>????????????

mastermind_gsm · 08-20-2011, 12:53

Quote:

Originally Posted by DILDIL-PAKISTAN

i need this phone flash file plz give me file if u have
more info this
HX_PROJECT_PCB01_GPRS_MT6253_S00.H8_V08_MLT1_QQX_1 10303_NEW.BIN_FLNS71VS128RB0AHK0L0

[IMG]http://**********.pk/images/jdv1313840461c.png[/IMG]

BR,
..::mastermind_gsm::..

helal · 08-20-2011, 22:37

Helal China mobile =green g999 phone mastar cpu flash file problem help gpg dregon box

turca · 08-22-2011, 17:40

2 files:

Initializing...
DA_LIB_VER_3.5.0.2
It is sensing the pinout fast...
D-=23 D+=22
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_S71PL127N
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=359983030129138
IMEI 2=359983030129153
--------NOR_FLASH_CONFIG--------
Flash Bank count=0
EFS sector count=256
File sector count=512
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00000100
Fix NV addr=0x00000100
Product information addr=0x00000100
MMI resource addr=0x00000200
------Auto Format Address-------
Start=0x00000000
Size =0x00000100
Read FS info...done

All Done.
Reading Project Version...
Platform Version: MOCOR_09A.W10.25_P1_Debug
Project Version: SC6600L_sp6601l_trisim
MMI Version: SC6600L_sp6601l_trisim
BASE Version: BASE_TRISIM_R1.0.2022
HW Version: SC6600L_sp6601l
Project Bulid Time: 1-25-2011 15:58:22

and

Initializing...
DA_LIB_VER_3.5.0.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_S71PL127N
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=355287000482327
IMEI 2=910575601400468
--------NOR_FLASH_CONFIG--------
Flash Bank count=1769588992
EFS sector count=35072
File sector count=8915456
Sector size=0x00000000
Flash start addr=0x00000100
Flash size=0x00000100
Fix NV addr=0x00004008
Product information addr=0x00004100
MMI resource addr=0x00000155
------Auto Format Address-------
Start=0x00000000
Size =0x00004100
Read FS info...done
All Done.
Reading Project Version...
Platform Version: MOCOR_09A_QUASIM.W11.09.03_Release
Project Version: SC6600L_sp6601l_trisim
MMI Version: SC6600L_sp6601l_trisim
BASE Version: BASE_10A.W11.11
HW Version: SC6600L_sp6601l
Project Bulid Time: 5-20-2011 17:30:59

link: NOR_S71PL127N.rar - 4shared.com - online file sharing and storage - download

pranav_raj2587 · 08-25-2011, 08:06

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_K5L2731CAM
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00000000, Size=0x00000200, Running NV=0xA01AE100
Error: Unsaft EFS Address, Please input the right format address and try again.
Failed to auto format.

pterz g · 08-26-2011, 14:45

need nokia c9 spd flashfile:::CPU:SC6600L2 FASH:NOR_ST_M58WRO64KT

lucky2010 · 08-26-2011, 15:13

dear sir i need YXTEL X88 16 mb flash file plz send me urgent
here is info........

Initializing...
DA_LIB_VER_3.5.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: G107U10R038TOGHINDI100120

08-10-2011, 05:25	#1261 (permalink)
john nison Junior Member Join Date: Nov 2008 Posts: 38 Member: 896293 Status: Offline Thanks Meter: 1	Huwai G6620 I need file G6620 Thanks

08-13-2011, 06:40	#1263 (permalink)
iamsreekanthk Banned Join Date: Dec 2009 Location: india Posts: 90 Member: 1178099 Status: Offline Sonork: 143 Thanks Meter: 3	I NEED GLX MODEL:A101 FLASHE FILE pls brrrrrrrrrrrrr Sorry for double post Last edited by iamsreekanthk; 08-13-2011 at 06:46.

08-25-2011, 08:06	#1273 (permalink)
pranav_raj2587 Freak Poster Join Date: Dec 2008 Location: P.C. Electronic,Varanasi,india Posts: 230 Member: 931147 Status: Offline Thanks Meter: 37	G nine V888 flash file 16mb need Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast... D-=8 D+=6 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM11 Connected...sending boot... FDL test...OK ArmBootMode: 6600700100005A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 ok Reading phone HW info... Read info is done. CPU: SC6600L2 Flash: NOR_K5L2731CAM setting the Flash Parameters... Settings have been completed! Reading FileSystem info... FileSystem Version: 0A Start=0x00000000, Size=0x00000200, Running NV=0xA01AE100 Error: Unsaft EFS Address, Please input the right format address and try again. Failed to auto format.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

08-10-2011, 14:17	#1262 (permalink)
bukharimobiles Crazy Poster Join Date: May 2009 Posts: 52 Member: 1024486 Status: Offline Sonork: bma Thanks Meter: 5	please send me cright l1000 flashfile urgent . [email protected]

08-18-2011, 04:49	#1266 (permalink)
DILDIL-PAKISTAN No Life Poster Join Date: Nov 2010 Location: PAKISTAN Posts: 594 Member: 1435528 Status: Offline Sonork: 100.1603713 Thanks Meter: 217	i need this phone flash file plz give me file if u have more info this HX_PROJECT_PCB01_GPRS_MT6253_S00.H8_V08_MLT1_QQX_1 10303_NEW.BIN_FLNS71VS128RB0AHK0L0

08-18-2011, 07:55	#1267 (permalink)
RCB Telecom Registered User Join Date: Feb 2009 Location: Craiova(Romania) Age: 18 Posts: 597 Member: 972420 Status: Offline Sonork: manole Thanks Meter: 134	c5000 spedtrium needed full back up.................................

08-20-2011, 07:15	#1268 (permalink)
Faheem Anjum No Life Poster Join Date: Nov 2006 Location: (United States Of Islam) Age: 37 Posts: 24,984 Member: 399832 Status: Offline Sonork: Faheem Anjum Thanks Meter: 24,311	1130 3 sim spd flash files here :Download 1130.zip from Mirrorcreator - Upload files to multiple file sharing sites

08-20-2011, 11:57	#1269 (permalink)
rajakhank3 No Life Poster Join Date: May 2009 Location: android efs Posts: 618 Member: 1042104 Status: Offline Sonork: 100.1609232 Thanks Meter: 216	need gild u3 flash file pls if any body have share thanks in advanced>????????????

08-20-2011, 22:37	#1271 (permalink)
helal Freak Poster Join Date: Mar 2006 Posts: 142 Member: 248318 Status: Offline Sonork: 01734164174 Thanks Meter: 4	Helal China mobile =green g999 phone mastar cpu flash file problem help gpg dregon box

08-22-2011, 17:40	#1272 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,385 Member: 211017 Status: Offline Thanks Meter: 312	2 files: Initializing... DA_LIB_VER_3.5.0.2 It is sensing the pinout fast... D-=23 D+=22 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM11 Connected...sending boot... FDL test...OK ArmBootMode: 6600700900005A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 ok Reading phone HW info... Read info is done. CPU: SC6600L7 Flash: NOR_S71PL127N setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=359983030129138 IMEI 2=359983030129153 --------NOR_FLASH_CONFIG-------- Flash Bank count=0 EFS sector count=256 File sector count=512 Sector size=0x00000000 Flash start addr=0x00000000 Flash size=0x00000100 Fix NV addr=0x00000100 Product information addr=0x00000100 MMI resource addr=0x00000200 ------Auto Format Address------- Start=0x00000000 Size =0x00000100 Read FS info...done All Done. Reading Project Version... Platform Version: MOCOR_09A.W10.25_P1_Debug Project Version: SC6600L_sp6601l_trisim MMI Version: SC6600L_sp6601l_trisim BASE Version: BASE_TRISIM_R1.0.2022 HW Version: SC6600L_sp6601l Project Bulid Time: 1-25-2011 15:58:22 and Initializing... DA_LIB_VER_3.5.0.2 It is sensing the pinout fast... D-=8 D+=6 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM11 Connected...sending boot... FDL test...OK ArmBootMode: 6600700900025A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 ok Reading phone HW info... Read info is done. CPU: SC6600L7 Flash: NOR_S71PL127N setting the Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=355287000482327 IMEI 2=910575601400468 --------NOR_FLASH_CONFIG-------- Flash Bank count=1769588992 EFS sector count=35072 File sector count=8915456 Sector size=0x00000000 Flash start addr=0x00000100 Flash size=0x00000100 Fix NV addr=0x00004008 Product information addr=0x00004100 MMI resource addr=0x00000155 ------Auto Format Address------- Start=0x00000000 Size =0x00004100 Read FS info...done All Done. Reading Project Version... Platform Version: MOCOR_09A_QUASIM.W11.09.03_Release Project Version: SC6600L_sp6601l_trisim MMI Version: SC6600L_sp6601l_trisim BASE Version: BASE_10A.W11.11 HW Version: SC6600L_sp6601l Project Bulid Time: 5-20-2011 17:30:59 link: NOR_S71PL127N.rar - 4shared.com - online file sharing and storage - download

08-26-2011, 14:45	#1274 (permalink)
pterz g Freak Poster Join Date: Aug 2009 Location: Gsmz Posts: 276 Member: 1106460 Status: Offline Thanks Meter: 35	need nokia c9 spd flashfile:::CPU:SC6600L2 FASH:NOR_ST_M58WRO64KT

08-26-2011, 15:13	#1275 (permalink)
lucky2010 No Life Poster Join Date: Jun 2010 Location: Dadu Sindh Pakistan Age: 37 Posts: 1,131 Member: 1322713 Status: Offline Sonork: 100.1663786 Thanks Meter: 254	dear sir i need YXTEL X88 16 mb flash file plz send me urgent here is info........ Initializing... DA_LIB_VER_3.5.0.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=7 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EC240200000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: G107U10R038TOGHINDI100120