cannot connect to qhsusb

[LEENO]

phone freeze at boot

[rebainoor]

Originally Posted by LEENO

Please help me asap, phone is detected in qhsusb mode by other tool and succesfull done frp and userdata\cache wipe but still in bootloop

Your driver not installed proprely you need to instal qdload9008 driver in medusa pro folder

[LEENO]

smartrepair done succesfull but phone status not changed, still show logo and restart, bootloop

[Medusa Box]

still show logo and restart, bootloop

Most likely, device has HW problem(s). Also, probably boot loaders in SRF "HUAWEI_SCL-L01_USB_MSM8909.srf", which You have used for repairing, could be not suitable (not compatible) with your phone (boot loaders are older (has lower version) than should be in your phone. Try to perform "Factory Repair" operation ("Factory repair" tab in Software) using the latest Huawei xml firmware (with "rawprogram0.xml" and "patch0.xml" files) for this device.

Also, look here: http://forum.gsmhosting.com/vbb/f664.../#post12545927.

[LEENO]

where i can get last rawprogram0.xml" and "patch0.xml" files?

[Medusa Box]

You can google it or request it here: http://forum.gsmhosting.com/vbb/f664...15/index6.html.

[LEENO]

xml firmware writed but phone still in bootloop, show logo and restart

Device : CoreID_009600E1
Core : Qualcomm MSM8909
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
Connect successful.
---------------------------------------------------------------
SW: 1.4.7; FW: 1.22.
P00: GPT (00000000, 00000022)
P01: sbl1 (00000022, 00000400)
P02: hyp (00000422, 00000400)
P03: sec (00002000, 00000040)
P04: DDR (00002040, 00000040)
P05: rpm (00004000, 00000400)
P06: tz (00004400, 00000400)
P07: aboot (00004800, 00002780)
P08: pad (00006F80, 00000800)
P09: oeminfo (00007780, 00020000)
P10: misc (00027780, 00002000)
P11: modemst1 (00029780, 00002000)
P12: modemst2 (0002B780, 00002000)
P13: fsg (0002E000, 00002000)
P14: modem (00030000, 00064000)
P15: fsc (00094000, 00000002)
P16: ssd (00094002, 00000010)
P17: log (00094012, 00020000)
P18: persist (000B6000, 00004000)
P19: boot (000BA000, 00020000)
P20: recovery (000DA000, 00018000)
P21: erecovery (000F2000, 00018000)
P22: cache (0010A000, 00080000)
P23: cust (0018A000, 00080000)
P24: system (0020A000, 00380000)
P25: userdata (0058A000, 00905FDF)
Selected rawprogram XML file: D:/BACK/Desktop/SCL-L01, C432B140, Switzerland/dload/extracted_firmware/rawprogram0.xml.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
Writing. Please wait...
Writing partition sbl1... Done.
File D:/BACK/Desktop/SCL-L01, C432B140, Switzerland/dload/extracted_firmware/hyp.mbn open failed.
File D:/BACK/Desktop/SCL-L01, C432B140, Switzerland/dload/extracted_firmware/sec.dat open failed.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition aboot... Done.
Writing partition fsg... Done.
Writing partition modem... Done.
Writing partition persist... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition cache... Done.
Writing partition cust... Done.
Writing partition system... Done.
Writing MBR...Done.
Writing primary GPT...Done.
Writing partition BackupGPT... Done.
Writing finished.
SW: 1.4.7; FW: 1.22.
Disconnected.

[Medusa Box]

Most likely, device has HW problem(s).

[LEENO]

maybe it not have oeminfo or is locked to custom firmware, any way to unlock bootloader in 9008 mode or fastboot?