cant repair boot of samsung I9001 - GSM-Forum

reignsmart · 07-31-2012, 13:40

also tried loading full firmware but it took so long. in my calculation loading of firmware is 2% per hour then at some point connection failed

Code:

Log started at 7/30/2012 12:41:29 PM ...
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Samsung GT-I9001
Connecting. Please wait...
Resetting target. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
MI: RTCK reaction time 126 ns, average speed 7936 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
MI: Halting target, attempt 1.
MI: Qualcomm ARM1136JF-S core detected.
MI: Qualcomm CPUID = 2057A0E1.
JTAG speed  : Auto (RTCK).
VREF level  : 1.79 V
CPU         : Qualcomm MSM8255T
Core ID     : 2057A0E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000191.
MI: Detailed server caps: FLASH, WDOG, A64, IOCTL
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xE0150001.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000191
Storage Device: Samsung eMMC M8G2FA
Device ID     : 00150001
 Block size   : 512 bytes
 Blocks       : 15106048
 Storage size : 7.2 Gb
eMMC: partition, type 0x00000045 (0x30393443, 0x46343537)
eMMC: partition, type 0x00000020 (0x000101D2, 0x00930000)
eMMC: partition, type 0x00000073 (0x7478652E, 0x00000034)
eMMC: partition, type 0x00000038 (0x45334435, 0x44393839)
WARNING[002]: Partition Table damaged. Use Full flash write.
Connect successful.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\Samsung_GTI9001_2GB.bin" file...
Writting BOOT section. Please wait...
MI: Server status 0xFFFFFFFF (not STAT_IDLE).
ERROR[018]: Logical block operation failed at 106880 Kb (Hex address 0x06860000). Reason: Connection lost.
Disconnected
Selected device model: Samsung GT-I9001
Connecting. Please wait...
Resetting target. Please wait...
MI: RTCK reaction time 126 ns, average speed 7936 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
MI: Halting target, attempt 1.
MI: Qualcomm ARM1136JF-S core detected.
MI: Qualcomm CPUID = 2057A0E1.
JTAG speed  : Auto (RTCK).
VREF level  : 1.79 V
CPU         : Qualcomm MSM8255T
Core ID     : 2057A0E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000191.
MI: Detailed server caps: FLASH, WDOG, A64, IOCTL
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xE0150001.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000191
Storage Device: Samsung eMMC M8G2FA
Device ID     : 00150001
 Block size   : 512 bytes
 Blocks       : 15106048
 Storage size : 7.2 Gb
eMMC: partition, type 0x00000045 (0x30393443, 0x46343537)
eMMC: partition, type 0x00000020 (0x000101D2, 0x00930000)
eMMC: partition, type 0x00000073 (0x7478652E, 0x00000034)
eMMC: partition, type 0x00000038 (0x45334435, 0x44393839)
WARNING[002]: Partition Table damaged. Use Full flash write.
Connect successful.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\Samsung_GTI9001_2GB.bin" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait...
MI: Server status after request 0xFFFFFFFF (not STAT_DATA).
ERROR[018]: Logical block operation failed at 212992 Kb (Hex address 0x0D000000). Reason: Connection lost.

soshan · 07-31-2012, 22:35

checking this process
1. full erase
2. writting repair file in easy tab then wrtting good firmware with odion then repair imei without jtag with anothere tools.
testing in p1000 and x10i
i think is better and easy way.

Medusa Box · 08-01-2012, 06:03

Also use the fully charged battery or stable external power supply and select higher Jtag speed.

reignsmart · 08-03-2012, 06:46

Quote:

Originally Posted by soshan

checking this process
1. full erase
2. writting repair file in easy tab then wrtting good firmware with odion then repair imei without jtag with anothere tools.
testing in p1000 and x10i
i think is better and easy way.

there is no option for full erase

also selected jtag speed to higher option but the calculated writing time is 2 days, wow!

Medusa Box · 08-03-2012, 07:15

What speed have You slected exactly?

reignsmart · 08-10-2012, 11:08

tried 12.0 MHz, 8.0 MHz and also auto (RTCK)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Please Help, Pinout of N8810	mobileinfo	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	06-30-2010 15:53
All LOCK and ALL version of Nokia - Universal SP Unlocker 4.0 - download now !!!	bp.bonus	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	01-30-2000 16:41
GID for nokia 5110 of telecel or TMN or Optimus?	hicom	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	10-13-1999 15:29
Silly question!! Why is it impossible to read out the mastercode of Nokia phones????	MyKe	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	09-26-1999 14:31
The multiple errors of Winlock ... ???	Genata	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	09-20-1999 19:12

07-31-2012, 22:35	#2 (permalink)
soshan No Life Poster Join Date: Sep 2007 Location: iran-shushtar Posts: 2,753 Member: 592636 Status: Offline Thanks: 9,158 Thanked 517 Times in 307 Posts	checking this process 1. full erase 2. writting repair file in easy tab then wrtting good firmware with odion then repair imei without jtag with anothere tools. testing in p1000 and x10i i think is better and easy way.

08-01-2012, 06:03	#3 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Also use the fully charged battery or stable external power supply and select higher Jtag speed.

08-03-2012, 07:15	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	What speed have You slected exactly?

08-10-2012, 11:08	#6 (permalink)
reignsmart Freak Poster Join Date: Sep 2003 Location: philippines Age: 35 Posts: 440 Member: 39561 Status: Offline Thanks: 77 Thanked 106 Times in 46 Posts	tried 12.0 MHz, 8.0 MHz and also auto (RTCK)