Care Unlock  
Your online unlock store
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > GSMServer Products > Medusa
Reload this Page Cant repair W7700
Register FAQDonate Forum Rules ★. iPhone Unlock .★ -= JTAG BOOM =- .: Nokia Unlock :. Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old 06-18-2012, 05:29   #1 (permalink)
No Life Poster
 
Join Date: Apr 2010
Location: Uzbekistan
Age: 34
Posts: 3,940
Member: 1293050
Status: Offline
Sonork: 100.1625975
Thanks: 165
Thanked 688 Times in 598 Posts
Cant repair W7700
where is my mistake
Log started at 18.06.2012 8:56:55 ...
Welcome to Medusa Box Software version 1.4.0
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Please connect the target device and power it on...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x00000000, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Failed to load.
ERROR[002]: Failed to load Medusa Device Server to target RAM.
Please connect the target device and power it on...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x00000000, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.63 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Please connect the target device and power it on...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.63 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 2.63 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFF0640, cycle 0.
MI: Received status 0x00001F81, cycle 1.
MI: Received status 0x023FB747, cycle 2.
MI: Failed to start Medusa Device Server.
  Reply With Quote
Old 06-18-2012, 07:33   #2 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
What is the state of your phone? Maybe, You have tried to connect working phone... Have You soldered Reset and PS_HOLD pins? Is phone's battery fully charged?
Also please use the latest software version.
  Reply With Quote
The Following User Says Thank You to Medusa Box For This Useful Post:
Old 06-18-2012, 12:06   #3 (permalink)
No Life Poster
 
Join Date: Apr 2010
Location: Uzbekistan
Age: 34
Posts: 3,940
Member: 1293050
Status: Offline
Sonork: 100.1625975
Thanks: 165
Thanked 688 Times in 598 Posts
i changed to second cable
reset and PS_HOLD soldered good
Log started at 18.06.2012 13:40:55 ...
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Please connect the target device and power it on...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
MI: Halting target, attempt 2.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
i cant solve problem
anyway will try again
  Reply With Quote
Old 06-20-2012, 08:08   #4 (permalink)
No Life Poster
 
Join Date: Apr 2010
Location: Uzbekistan
Age: 34
Posts: 3,940
Member: 1293050
Status: Offline
Sonork: 100.1625975
Thanks: 165
Thanked 688 Times in 598 Posts
at last phone repaired
i dont know how but
today i wanted repair once more and plugged phone to box
Log started at 20.06.2012 9:45:28 ...
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000035.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0xA0EC00DC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000035
Flash device: Samsung 512Mb
Flash ID : 00EC00DC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Opening "D:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_SPHW7700_R epair.mf" file...
Writting BOOT section. Please wait... Done
Disconnected


but now phone not going to Emergency mode
to flash
what can be done
  Reply With Quote
Old 06-20-2012, 08:18   #5 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
Try to make Erase Full flash before of Repair.
  Reply With Quote
Old 06-20-2012, 10:43   #6 (permalink)
No Life Poster
 
Join Date: Apr 2010
Location: Uzbekistan
Age: 34
Posts: 3,940
Member: 1293050
Status: Offline
Sonork: 100.1625975
Thanks: 165
Thanked 688 Times in 598 Posts
i did SCH W770 and SPH W7700
no reaction
no emergency
what can be done
phone was phorking masters try flash for unlock
after that phone gone dead

Log started at 20.06.2012 13:03:33 ...
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: Samsung SCH-W770
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000035.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0xA0EC00DC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000035
Flash device: Samsung 512Mb
Flash ID : 00EC00DC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Connect successful.
Erasing CUSTOM section. Please wait... Done
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
Erasing BOOT section. Please wait... Done
Disconnected
Selected device model: Samsung SCH-W770
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000035.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0xA0EC00DC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000035
Flash device: Samsung 512Mb
Flash ID : 00EC00DC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Opening "D:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_SCHW770_Re pair.mf" file...
Writting BOOT section. Please wait... Done
Disconnected
Repair done.
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Failed to load.
ERROR[002]: Failed to load Medusa Device Server to target RAM.
Please connect the target device and power it on...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000035.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0xA0EC00DC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000035
Flash device: Samsung 512Mb
Flash ID : 00EC00DC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Opening "D:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_SPHW7700_R epair.mf" file...
Writting BOOT section. Please wait... Done
Disconnected
Repair done.
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000035.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0xA0EC00DC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000035
Flash device: Samsung 512Mb
Flash ID : 00EC00DC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Connect successful.
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
Erasing BOOT section. Please wait... Done
Erasing CUSTOM section. Please wait... Done
Disconnected
Selected device model: Samsung SPH-W7700
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 200C00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000035.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0xA0EC00DC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000035
Flash device: Samsung 512Mb
Flash ID : 00EC00DC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Opening "D:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_SPHW7700_R epair.mf" file...
Writting BOOT section. Please wait... Done
Disconnected
  Reply With Quote
Old 06-20-2012, 12:52   #7 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
What keys combination do You use to put your phone into Emergency Mode?

To put the phone into Emergency Mode, please reconnect the battery, press and hold "Volume+" + "Volume-" + "Power ON" keys.
  Reply With Quote
Old 06-20-2012, 13:24   #8 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
Also please try to do the next:
1. Connect your device in Advanced Mode and make Erase Full flash.
2. Select (check) "ECC Mode" option, select (check) "Full flash" option and try to write this Full flash file https://www.boot-loader.com/app/webr...lash%20ECC.rar.
3. Put the phone into Emergency Mode.

Write here the result.
  Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
thread Thread Starter Forum Replies Last Post
Nokia "Contact Service" Repairer Dirk Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 5 10-04-2011 05:45
Contact Service Repairer 1.2 by Bartek Allen Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 4 02-23-2011 08:00
I CANT GET DEJAN TO WORK! dario Nokia Hardware & Hardware-Repair Area 1 01-27-2001 10:01
New!! Nokia Flash Checksum And Contact Service Repair HookerGsM Main Sales Section 0 01-02-2001 09:12
cant unlock CSI eeprom Stryker Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 9 08-20-2000 13:00


All times are GMT +1. The time now is 00:40.

Contact Us - GSM-Forum by zfrank - Archive - Top


Powered by Searchlight © 2013 Axivo Inc.
- GSM Hosting Ltd. - 1999-2013 -
Page generated in 0.34432 seconds with 11 queries

SEO by vBSEO