eMMC direct connection problem [Answered] - GSM-Forum

ali1989 · 12-06-2018, 16:50

Hello medusa team i have a problem with repair dead boot asus zenfone 2 z00ed when i press connect button to medusa pro i had this error when i connect without gnd i wont see any error

https://ibb.co/DDmzfjY

https://ibb.co/K5x18zj

Medusa Box · 12-07-2018, 06:09

Hello.

The problem is with the soldered wires. At first check correctness of pinout. Then re-solder attentively and carefully all necessary wires, make each of them as short as possible, check shorts between eMMC contacts and between soldered wires and try connect again.

shamzil · 04-08-2019, 07:52

so these connections should come on the emmc chip not the points shown on the medusa app picture(its shown in the mother board)

Medusa Box · 04-08-2019, 08:54

Quote:

Originally Posted by shamzil

so these connections should come on the emmc chip not the points shown on the medusa app picture(its shown in the mother board)

No, everything must be done according to the Software manual and according to the pinout picture.

12-06-2018, 16:50	#1 (permalink)
ali1989 Freak Poster Join Date: Aug 2007 Location: Turkey Age: 36 Posts: 145 Member: 575238 Status: Offline Sonork: No id Thanks Meter: 11	eMMC direct connection problem [Answered] Hello medusa team i have a problem with repair dead boot asus zenfone 2 z00ed when i press connect button to medusa pro i had this error when i connect without gnd i wont see any error https://ibb.co/DDmzfjY https://ibb.co/K5x18zj Last edited by Medusa Box; 12-07-2018 at 06:11.

12-07-2018, 06:09	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,397	Hello. The problem is with the soldered wires. At first check correctness of pinout. Then re-solder attentively and carefully all necessary wires, make each of them as short as possible, check shorts between eMMC contacts and between soldered wires and try connect again.

04-08-2019, 07:52	#3 (permalink)
shamzil Freak Poster Join Date: Jul 2005 Location: Sri Lanka Posts: 274 Member: 164422 Status: Offline Thanks Meter: 24	so these connections should come on the emmc chip not the points shown on the medusa app picture(its shown in the mother board)