First in the World oppo A3S fro ,lock code done with Mesusa

[Ramuwalia]

oppo A3S fro ,lock code done with Mesusa Pro

Pinouts






Mobile Ok


After Erase remove jumpers turn on mobile and if ask for FRP type *813# go to setting and Reast
Done


*DO with your Own risk


Gagan Karwal

[AnonDz]

hi bro did you unlock cph1853 i cant seem to find vcc anywhere

[hendry888888]

not first in the world.ufi box is first in the world

[asia_gsm]

Originally Posted by AnonDz

hi bro did you unlock cph1853 i cant seem to find vcc anywhere

Here Is CPH1853 Pinouts & Files Are Same

[AnonDz]

Originally Posted by asia_gsm

Here Is CPH1853 Pinouts & Files Are Same

yes its the same pinout and when connect vccq and vcc main dosent connect i found another way for cph1853 to use usb cable to replace vcc and vccq but after i erased userdata partion and disconect the phone dosent start connect only in qualcomm usb i am downloading a full emmc dump bin and i will write it and see thank you for the help

[Ramuwalia]

Originally Posted by hendry888888

not first in the world.ufi box is first in the world

read post first bro i m talking about medusa box
first in medusa pro .😊

Gagan Karwal

[Pijush Das]

Originally Posted by Ramuwalia

oppo A3S fro ,lock code done with Mesusa Pro

Pinouts






Mobile Ok


After Erase remove jumpers turn on mobile and if ask for FRP type *813# go to setting and Reast
Done


*DO with your Own risk


Gagan Karwal

Congrasulation Mr. Ramuwalia & really 1st in the World you applied this Risky Method with Medusa...

…..BUT That Method is Very Very Risky.....

Bcoz Some Phones Need Few Folders in Userdata,
Otherwise come Hang Logo on Startup,
some Don't (Fully Dead)…..

So, request to everyone that Please think one time Before apply this Method that what you are doing

...@PIJUSH...

[reaz.com]

This method is very very very risky, and its not work for me....................

[reaz.com]

Here is no dead risk oppo, Vivo and realme 100% work.


http://forum.gsmhosting.com/vbb/f664.../#post13823286

[Ramuwalia]

Originally Posted by reaz.com

This method is very very very risky, and its not work for me....................

I agree with you bro Its not easy like other tools.. it is working for me.

But Your Way is Very good . thanx for your feedback and providing new Safe way

[Tanha0321]

Model Settings: Interface : eMMC
 Voltage   : 2.8V
 Bus Mode  : 1 bit
 Bus speed : Auto
 

 Connecting...
 Device       : Samsung eMMC RD64MB
 Page size    : 512 B
 Block size   : 512 B
 Block count  : 61071360
 Size         : 29.12 GB (29820.00 MB)
 ---------------------------------------------------------------
 CID Info
 

 CID                   : 150100524436344D4201DADFD0DD2567
 Manufacturer ID       : 0X15
 Device/BGA            : BGA (Discrete embedded)
 OEM/Application ID    : 0X00
 Product name          : RD64MB
 Product revision      : 0.1
 Product serial number : (hex) DADFD0DD
 Manufacturing date    : 02/2018
 ---------------------------------------------------------------
 CSD Info
 

 CSD                   : D02701320F5903FFF6DBFFEF8E40400D
 CSD structure         : CSD version No. 1.2
 SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                         4.51, 5.0, 5.01, 5.1
 Data read access time1: 15 ms
 TRAN speed            : 26 MHz
 READ block length     : 512 Bytes
 WP group enable       : YES
 PERM_WRITE_PROTECT    : NO
 TMP_WRITE_PROTECT     : NO
 ---------------------------------------------------------------
 EXTCSD Info
 

 Revision 1.8 (for MMC v5.1)
 Erase block size      : 512 Kbytes
 Boot1 size            : 4096 Kbytes
 Boot2 size            : 4096 Kbytes
 RPMB size             : 4096 Kbytes
 

 Partition config      : (0x38) 00111000
 Boot partition enable : User area
 (Bus width = 1Bit)
 Boot ACK              : No boot acknowledge sent (default)
 

 Boot bus conditions   : (0x00) 00000000
 Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
 Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
 Boot mode             : Use single data rate + backward compatible timings in boot operation (default)
 

 RST_n function        : (0x01) RST_n signal is permanently enabled
 

 Partitioning support  : Device supports partitioning features
 Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
 Max enhanced data size: 15261696 Kbytes
 Partitions attribute  : 0x0
 Part setting completed: 0x0
 GP partition 1 size   : 0 b
 GP partition 2 size   : 0 b
 GP partition 3 size   : 0 b
 GP partition 4 size   : 0 b
 Enhanced area size    : (0x0) 0 b
 Enhanced area start   : (0x0) 0 b
 

 Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RD64MB_28_07_2020_15_41_08.bin.
 Connect successful.
 ---------------------------------------------------------------
 SW: 2.1.1; FW: 1.24.
 P00: PART_EE          (00000001, FFFFFFFF)	2048 GB
 

 ---------------------------------------------------------------Searching Android build info...
 Ok
 

 Disk/Image size       : 47c00000 bytes
 Device sector size    : 512 bytes
 Partition offset      : 2179072
 Number of sectors     : 7030784
 Build ID              : OPM1.171019.026
 Release ID            : 8.1.0
 Architecture ABI      : arm64-v8a
 Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
 Build Description     : S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20200617.231821 release-keys
 

 Partition to reset not found!
 Disconnected.