Hello - GSM-Forum

lampik · 09-28-2017, 20:36

hi there, im a new owner of octoplus pro, during the instalation , i found some problems when i connect my dead phone LG d320N to the PC is recognised as Zeus flash device can anyone help ? I like to repair it with octoplus via USB ...

Medusa Box · 09-29-2017, 05:45

Hi.

Quote:

when i connect my dead phone LG d320N to the PC is recognised as Zeus flash device

To repair this phone via USB, it should be detected in PC Device Manager as "Qualcomm...9008" device, not as Zeus device. For this, please manually re-install HSUSB drivers from Medusa Pro Software installation folder, then reconnect the device and try to do repair.

To repair phone via USB, do the following:

1. Install the latest Medusa Pro Software version (Medusa Box Downloads - Software, Drivers, Manual).
2. Download and install SRF "LG_D320N_USB_Samsung_eMMC_K5XVMB.SRF" from the Support Area (via "Download *.srf" button in Software).
3. Select "USB" Interface in Software.
4. Select LG D320N in the Software list (it will appear in the list after installation of proper SRF).
5. Connect the phone in "Qualcomm...9008" Mode to PC.
6. Press "Connect" button in Software to connect the device.
7. When device will be connected successfully, do "Smart Repair" ("Smart Repair" button).
8. Post here full Software log and say the result.

lampik · 09-29-2017, 11:54

is there any alternate data0 pin ?

lampik · 09-29-2017, 12:37

Quote:

Originally Posted by Medusa Box

Hi.

To repair this phone via USB, it should be detected in PC Device Manager as "Qualcomm...9008" device, not as Zeus device. For this, please manually re-install HSUSB drivers from Medusa Pro Software installation folder, then reconnect the device and try to do repair.

To repair phone via USB, do the following:

1. Install the latest Medusa Pro Software version (Medusa Box Downloads - Software, Drivers, Manual).
2. Download and install SRF "LG_D320N_USB_Samsung_eMMC_K5XVMB.SRF" from the Support Area (via "Download *.srf" button in Software).
3. Select "USB" Interface in Software.
4. Select LG D320N in the Software list (it will appear in the list after installation of proper SRF).
5. Connect the phone in "Qualcomm...9008" Mode to PC.
6. Press "Connect" button in Software to connect the device.
7. When device will be connected successfully, do "Smart Repair" ("Smart Repair" button).
8. Post here full Software log and say the result.

Phone pass writing/smart repair with no lucky rapair phone still dead after the procedure.

Medusa Box · 09-29-2017, 12:47

Post here full Software log with all performed operations with the phone.

lampik · 09-29-2017, 12:59

Log started at 2017-09-29 11:59:35 ...
Welcome to Octoplus JTAG Box Software version 1.9.5.4
Operating Mode: EasyRepair Mode
Selected device model: LG D320N USB
Connecting. Please wait...
MI: Loading Medusa Device Server V2.USB.
MI: Connecting to Device Server.
MI: Initializing.
MI: Flash ID = 0xE0900001.
Interface : USB
CPU : Qualcomm MSM8610
Storage Device: Hynix eMMC H4G1d
Device ID : 00900001
Block size : 512 bytes
Blocks : 7634944
Storage size : 3728 Mb
Opening "D:\zapas\APLIKACJE_GSM\Octoplus_JTAG\Firmware\LG_ D320N_Repair.mf\LG_D320N_Repair.mf" file...
Writing ABOOT section. Please wait... Done
Writing BOOT section. Please wait... Done
Disconnected
Repair done.

After that operation phone stayed DEAD. no recovery no power On.

Medusa Box · 09-29-2017, 13:07

Please use Medusa Pro Software to repair the device - perform exactly steps 1-7, which I have written above, and post here full Software log.

lampik · 09-29-2017, 13:14

Welcome to Medusa Pro Software version 1.4.5.
Started.
Reader #0: Generic Usb Smart Card Reader 0

Model Settings:
Interface : USB
Brand : LG
Model : D320n
SRF : D:/zapas/APLIKACJE_GSM/Octoplus Pro JTAG Software/firmwareFolder/LG_D320N_USB_QLOADER.srf
Core : Qualcomm MSM8x26
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_008110E1
Core : Qualcomm MSM8x26
Page size : 512 B
Block size : 512 B
Block count : 7569408
Size : 3696.00 MB
Connect successful.
---------------------------------------------------------------
SW: 1.4.5; FW: 1.22.
P00: GPT (00000000, 00002000)
P01: modem (00002000, 00020000)
P02: sbl1 (00022000, 00000800)
P03: rpm (00022800, 00000400)
P04: tz (00022C00, 00000400)
P05: sdi (00023000, 00000400)
P06: aboot (00023400, 00001000)
P07: rpmb (00024400, 00000400)
P08: tzb (00024800, 00000400)
P09: abootb (00024C00, 00001000)
P10: pad (00025C00, 00001000)
P11: modemst1 (00026C00, 00001800)
P12: modemst2 (00028400, 00001800)
P13: misc (00029C00, 00008000)
P14: persist (00032000, 00010000)
P15: laf (00042000, 0000B000)
P16: boot (0004E000, 0000B000)
P17: recovery (00059000, 0000B000)
P18: fsg (00064000, 00001800)
P19: fsc (00066000, 00000400)
P20: ssd (00066400, 00000400)
P21: DDR (00068000, 00000400)
P22: encrypt (0006A000, 00000400)
P23: rct (0006A400, 00000400)
P24: drm (0006C000, 00004000)
P25: sns (00070000, 00004000)
P26: factory (00074000, 0000A000)
P27: fota (0007E000, 00010000)
P28: sbl1b (0008E000, 00000800)
P29: mpt (0008E800, 00010000)
P30: cust (000A0000, 00019000)
P31: eksst (000BA000, 00000400)
P32: system (000BC000, 002EDC00)
P33: cache (003A9C00, 0007D000)
P34: userdata (00426C00, 00310000)
P35: grow (00738000, 0000FFDF)
Repairing from file "D:/zapas/APLIKACJE_GSM/Octoplus Pro JTAG Software/firmwareFolder/LG_D320N_USB_QLOADER.srf".
Write data verification is enabled.
Writing GPT partition...
Read/write verification error. Possible reasons: damaged or write protected eMMC.
Disconnected.

lampik · 09-29-2017, 13:23

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_008110E1
Core : Qualcomm MSM8x26
Page size : 512 B
Block size : 512 B
Block count : 7569408
Size : 3696.00 MB
Connect successful.
---------------------------------------------------------------
SW: 1.4.4; FW: 1.22.
P00: GPT (00000000, 00002000)
P01: modem (00002000, 00020000)
P02: sbl1 (00022000, 00000800)
P03: rpm (00022800, 00000400)
P04: tz (00022C00, 00000400)
P05: sdi (00023000, 00000400)
P06: aboot (00023400, 00001000)
P07: rpmb (00024400, 00000400)
P08: tzb (00024800, 00000400)
P09: abootb (00024C00, 00001000)
P10: pad (00025C00, 00001000)
P11: modemst1 (00026C00, 00001800)
P12: modemst2 (00028400, 00001800)
P13: misc (00029C00, 00008000)
P14: persist (00032000, 00010000)
P15: laf (00042000, 0000B000)
P16: boot (0004E000, 0000B000)
P17: recovery (00059000, 0000B000)
P18: fsg (00064000, 00001800)
P19: fsc (00066000, 00000400)
P20: ssd (00066400, 00000400)
P21: DDR (00068000, 00000400)
P22: encrypt (0006A000, 00000400)
P23: rct (0006A400, 00000400)
P24: drm (0006C000, 00004000)
P25: sns (00070000, 00004000)
P26: factory (00074000, 0000A000)
P27: fota (0007E000, 00010000)
P28: sbl1b (0008E000, 00000800)
P29: mpt (0008E800, 00010000)
P30: cust (000A0000, 00019000)
P31: eksst (000BA000, 00000400)
P32: system (000BC000, 002EDC00)
P33: cache (003A9C00, 0007D000)
P34: userdata (00426C00, 00310000)
P35: grow (00738000, 0000FFDF)
Repairing from file "D:/zapas/APLIKACJE_GSM/Octoplus Pro JTAG Software/firmwareFolder/LG_D320N_USB_SAMSUNG_EMMC_K5XVMB.srf".
Write data verification is disabled.
Writing GPT partition... Done.
Writing modem partition... Done.
Writing sbl1 partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing aboot partition... Done.
Writing rpmb partition... Done.
Writing tzb partition... Done.
Writing abootb partition... Done.
Writing pad partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing CustomPart partition... Done.

Smart Repair is successfully complete.
SW: 1.4.4; FW: 1.22.
Disconnected.

Medusa Box · 09-29-2017, 13:25

This error:

Quote:

Write data verification is enabled.
Writing GPT partition...
Read/write verification error. Possible reasons: damaged or write protected eMMC.

means, that there is a problem with phone's eMMC flash chip. It is damaged or write protected. Unfortunately, for such devices only solution is a chip replacement.

lampik · 09-29-2017, 13:32

Is there ANY known repaired PHONE with USB Smart Repair ?

Phone was unlocked - unhappy at the end and that has destroyed chip ?

Medusa Box · 09-29-2017, 13:45

Quote:

Phone was unlocked - unhappy at the end and that has destroyed chip ?

Unfortunately, such situation often arris with Hynix eMMC flash chips.

Quote:

Is there ANY known repaired PHONE with USB Smart Repair ?

Yes, for example, please look here:

http://forum.gsmhosting.com/vbb/f664.../#post12547438,
http://forum.gsmhosting.com/vbb/f664...l#post11982581,
http://forum.gsmhosting.com/vbb/f664.../#post12587860,
http://forum.gsmhosting.com/vbb/f664.../#post12303550.

lampik · 09-29-2017, 13:46

So connecting d320n to emmc of box, i will be able to disable protection or read devices p.tables ?anything or it won't connect... ?

Medusa Box · 09-29-2017, 13:57

Not for this eMMC; disabling Write protection supported only for Samsung eMMC flash chips, in your case - only replacing eMMC will help You to repair this phone.

lampik · 09-29-2017, 14:05

What kind of memory You recomend ___

09-28-2017, 20:36	#1 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	Hello hi there, im a new owner of octoplus pro, during the instalation , i found some problems when i connect my dead phone LG d320N to the PC is recognised as Zeus flash device can anyone help ? I like to repair it with octoplus via USB ...

09-29-2017, 12:59	#6 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	Log started at 2017-09-29 11:59:35 ... Welcome to Octoplus JTAG Box Software version 1.9.5.4 Operating Mode: EasyRepair Mode Selected device model: LG D320N USB Connecting. Please wait... MI: Loading Medusa Device Server V2.USB. MI: Connecting to Device Server. MI: Initializing. MI: Flash ID = 0xE0900001. Interface : USB CPU : Qualcomm MSM8610 Storage Device: Hynix eMMC H4G1d Device ID : 00900001 Block size : 512 bytes Blocks : 7634944 Storage size : 3728 Mb Opening "D:\zapas\APLIKACJE_GSM\Octoplus_JTAG\Firmware\LG_ D320N_Repair.mf\LG_D320N_Repair.mf" file... Writing ABOOT section. Please wait... Done Writing BOOT section. Please wait... Done Disconnected Repair done. After that operation phone stayed DEAD. no recovery no power On. Last edited by lampik; 09-29-2017 at 13:05.

09-29-2017, 14:05	#15 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	What kind of memory You recomend ___ Last edited by lampik; 09-29-2017 at 14:11.

09-29-2017, 11:54	#3 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	is there any alternate data0 pin ?

09-29-2017, 12:47	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,397	Post here full Software log with all performed operations with the phone.

09-29-2017, 13:07	#7 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,397	Please use Medusa Pro Software to repair the device - perform exactly steps 1-7, which I have written above, and post here full Software log.

09-29-2017, 13:14	#8 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	Welcome to Medusa Pro Software version 1.4.5. Started. Reader #0: Generic Usb Smart Card Reader 0 Model Settings: Interface : USB Brand : LG Model : D320n SRF : D:/zapas/APLIKACJE_GSM/Octoplus Pro JTAG Software/firmwareFolder/LG_D320N_USB_QLOADER.srf Core : Qualcomm MSM8x26 Loader : QLoader_v1 Connecting... Sending loader...OK. Loader successfully initialized. Device : CoreID_008110E1 Core : Qualcomm MSM8x26 Page size : 512 B Block size : 512 B Block count : 7569408 Size : 3696.00 MB Connect successful. --------------------------------------------------------------- SW: 1.4.5; FW: 1.22. P00: GPT (00000000, 00002000) P01: modem (00002000, 00020000) P02: sbl1 (00022000, 00000800) P03: rpm (00022800, 00000400) P04: tz (00022C00, 00000400) P05: sdi (00023000, 00000400) P06: aboot (00023400, 00001000) P07: rpmb (00024400, 00000400) P08: tzb (00024800, 00000400) P09: abootb (00024C00, 00001000) P10: pad (00025C00, 00001000) P11: modemst1 (00026C00, 00001800) P12: modemst2 (00028400, 00001800) P13: misc (00029C00, 00008000) P14: persist (00032000, 00010000) P15: laf (00042000, 0000B000) P16: boot (0004E000, 0000B000) P17: recovery (00059000, 0000B000) P18: fsg (00064000, 00001800) P19: fsc (00066000, 00000400) P20: ssd (00066400, 00000400) P21: DDR (00068000, 00000400) P22: encrypt (0006A000, 00000400) P23: rct (0006A400, 00000400) P24: drm (0006C000, 00004000) P25: sns (00070000, 00004000) P26: factory (00074000, 0000A000) P27: fota (0007E000, 00010000) P28: sbl1b (0008E000, 00000800) P29: mpt (0008E800, 00010000) P30: cust (000A0000, 00019000) P31: eksst (000BA000, 00000400) P32: system (000BC000, 002EDC00) P33: cache (003A9C00, 0007D000) P34: userdata (00426C00, 00310000) P35: grow (00738000, 0000FFDF) Repairing from file "D:/zapas/APLIKACJE_GSM/Octoplus Pro JTAG Software/firmwareFolder/LG_D320N_USB_QLOADER.srf". Write data verification is enabled. Writing GPT partition... Read/write verification error. Possible reasons: damaged or write protected eMMC. Disconnected.

09-29-2017, 13:23	#9 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	Connecting... Sending loader...OK. Loader successfully initialized. Device : CoreID_008110E1 Core : Qualcomm MSM8x26 Page size : 512 B Block size : 512 B Block count : 7569408 Size : 3696.00 MB Connect successful. --------------------------------------------------------------- SW: 1.4.4; FW: 1.22. P00: GPT (00000000, 00002000) P01: modem (00002000, 00020000) P02: sbl1 (00022000, 00000800) P03: rpm (00022800, 00000400) P04: tz (00022C00, 00000400) P05: sdi (00023000, 00000400) P06: aboot (00023400, 00001000) P07: rpmb (00024400, 00000400) P08: tzb (00024800, 00000400) P09: abootb (00024C00, 00001000) P10: pad (00025C00, 00001000) P11: modemst1 (00026C00, 00001800) P12: modemst2 (00028400, 00001800) P13: misc (00029C00, 00008000) P14: persist (00032000, 00010000) P15: laf (00042000, 0000B000) P16: boot (0004E000, 0000B000) P17: recovery (00059000, 0000B000) P18: fsg (00064000, 00001800) P19: fsc (00066000, 00000400) P20: ssd (00066400, 00000400) P21: DDR (00068000, 00000400) P22: encrypt (0006A000, 00000400) P23: rct (0006A400, 00000400) P24: drm (0006C000, 00004000) P25: sns (00070000, 00004000) P26: factory (00074000, 0000A000) P27: fota (0007E000, 00010000) P28: sbl1b (0008E000, 00000800) P29: mpt (0008E800, 00010000) P30: cust (000A0000, 00019000) P31: eksst (000BA000, 00000400) P32: system (000BC000, 002EDC00) P33: cache (003A9C00, 0007D000) P34: userdata (00426C00, 00310000) P35: grow (00738000, 0000FFDF) Repairing from file "D:/zapas/APLIKACJE_GSM/Octoplus Pro JTAG Software/firmwareFolder/LG_D320N_USB_SAMSUNG_EMMC_K5XVMB.srf". Write data verification is disabled. Writing GPT partition... Done. Writing modem partition... Done. Writing sbl1 partition... Done. Writing rpm partition... Done. Writing tz partition... Done. Writing sdi partition... Done. Writing aboot partition... Done. Writing rpmb partition... Done. Writing tzb partition... Done. Writing abootb partition... Done. Writing pad partition... Done. Writing modemst1 partition... Done. Writing modemst2 partition... Done. Writing CustomPart partition... Done. Smart Repair is successfully complete. SW: 1.4.4; FW: 1.22. Disconnected.

09-29-2017, 13:32	#11 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	Is there ANY known repaired PHONE with USB Smart Repair ? Phone was unlocked - unhappy at the end and that has destroyed chip ?

09-29-2017, 13:46	#13 (permalink)
lampik Freak Poster Join Date: Jul 2006 Location: W-no Posts: 397 Member: 310418 Status: Offline Thanks Meter: 13	So connecting d320n to emmc of box, i will be able to disable protection or read devices p.tables ?anything or it won't connect... ?

09-29-2017, 13:57	#14 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,397	Not for this eMMC; disabling Write protection supported only for Samsung eMMC flash chips, in your case - only replacing eMMC will help You to repair this phone.