Care Unlock  
Your online unlock store
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > GSMServer Products > Medusa

Reply
 
LinkBack Thread Tools Display Modes
Old 08-04-2012, 09:02   #1 (permalink)
Junior Member
 
Join Date: Nov 2010
Posts: 25
Member: 1455973
Status: Offline
Sonork: Hasitha
Thanks: 2
Thanked 2 Times in 2 Posts
Htc desire boot repair

Dear team

phone came with HTC logo only Then I flashed official rom also note in bootloadermode s is on.After falshed phone totally dead then I jtag with Meusha easy repair file & flashed full firmwear file from your support but phone dead then I flashed only repair file,phone on with bootloader screen with only ruu option,recovery Hboot all gone & always s is on.When I supercid with advance option & press unlock software says no lockes but s is on.pls tell me how to s-off also now phone in htc logo with every corner exclamation marks cant flash any ruu it will dead & need to jtag.some logs attched f.y.i.Thanks

Log started at 7/25/2012 10:30:48 PM ...
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: HTC Desire (PB99200)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.65 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0055ECBC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Samsung 512Mb
Flash ID : 00EC55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : HTC__Y13
IMEI : 353833-04-xxxxxx
Opening "E:\HTC\HTC DESIRE\medusha\HTC_DESIRE_FullFlash.mf" file...
ERROR[029]: Invalid or damaged firmware file. Can't find required section.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.65 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001...
MI: Server status 0xFFFFFFFF (not STAT_IDLE).
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.65 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0055ECBC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Samsung 512Mb
Flash ID : 00EC55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : HTC__Y13
IMEI : 353833-04-xxxxxx
Opening "E:\HTC\HTC DESIRE\medusha\HTC_DESIRE_FullFlash.mf" file...
ERROR[029]: Invalid or damaged firmware file. Can't find required section.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.66 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0055ECBC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Samsung 512Mb
Flash ID : 00EC55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : HTC__Y13
IMEI : 353833-04-xxxxxx
Opening "E:\HTC\HTC DESIRE\medusha\HTC_DESIRE_FullFlash.mf" file...
ERROR[029]: Invalid or damaged firmware file. Can't find required section.
Connecting to server
Retrieving files list
Downloading file "HTC_DESIRE_Repair.mf"
Selected device model: HTC Desire (PB99200)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.65 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0055ECBC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Samsung 512Mb
Flash ID : 00EC55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : HTC__Y13
IMEI : 353833-04-xxxxxx
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HTC_DESIRE_Repair. mf" file...
Writting BOOT2 section. Please wait... Done
Writting HTC2 section. Please wait... Done
Writting APPBOOT2 section. Please wait... Done
Repairing CID and IMEI... Done
Disconnected
Repair done.
Selected device model: HTC Desire (PB99200)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.66 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0055ECBC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Samsung 512Mb
Flash ID : 00EC55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : HTC__Y13
IMEI : 353833-04-xxxxxxx
Connect successful.
ECC Mode enabled.
Opening "E:\HTC\HTC DESIRE\medusha\HTC_DESIRE_FullFlash.mf" file...
Writting BOOT section. Please wait... Done
  Reply With Quote
Old 08-04-2012, 14:38   #2 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
Hallo.
Please try to change phone's CID to "11111111".
  Reply With Quote
The Following 2 Users Say Thank You to Medusa Box For This Useful Post:
Old 08-04-2012, 18:20   #3 (permalink)
Junior Member
 
Join Date: Nov 2010
Posts: 25
Member: 1455973
Status: Offline
Sonork: Hasitha
Thanks: 2
Thanked 2 Times in 2 Posts
pls find below the log even after supercid bootmode say s is on when flashing unroot official ruu it get error with phone screen green comes red again green like that when flashing come to signaturies it will restarts phone comes to dead even no boot mode again need to jtag but every time s is on after flashed repair file,pls reply


Log started at 7/26/2012 10:44:06 PM ...
Welcome to Medusa Box Software version 1.5.0.1
Selected device model: HTC Desire (PB99200)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.60 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0055ECBC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Samsung 512Mb
Flash ID : 00EC55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : 11111111
IMEI : 353833-04-xxxxxxxx
Opening "E:\HTC\HTC DESIRE\HTC_DESIRE_Repair.mf" file...
Writting BOOT2 section. Please wait... Done
Writting HTC2 section. Please wait... Done
Writting APPBOOT2 section. Please wait... Done
Repairing CID and IMEI... Done
Disconnected
Repair done.
Selected device model: HTC Desire (PB99200)
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 202400E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.61 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0x0055ECBC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 0000007F
Flash device: Samsung 512Mb
Flash ID : 00EC55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
HTC CID : 11111111
IMEI : 353833-04-xxxxxx
Connect successful.
ECC Mode enabled.
Opening "E:\HTC\HTC DESIRE\HTC_DESIRE_FullFlash.mf" file...
Writting BOOT section. Please wait... Done :
  Reply With Quote
Old 08-06-2012, 05:59   #4 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
Have You tried to write Full flash "HTC_DESIRE_FullFlash.mf" in Advanced Mode?
  Reply With Quote
Old 08-09-2012, 14:47   #5 (permalink)
Junior Member
 
Join Date: Nov 2010
Posts: 25
Member: 1455973
Status: Offline
Sonork: Hasitha
Thanks: 2
Thanked 2 Times in 2 Posts
Yes I tried it but after full flashed phone totally dead need to jtag again.Thanks
  Reply With Quote
Old 08-09-2012, 15:14   #6 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 2,168
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks: 880
Thanked 721 Times in 474 Posts
Please postr here full log.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Nokia "Contact Service" Repairer Dirk Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 5 10-04-2011 05:45
Contact Service Repairer 1.2 by Bartek Allen Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 4 02-23-2011 08:00
F_loaders.bin and Boot.bin .. . micklong Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 1 01-29-2001 13:49
Phone not respond! (Load boot data) Need a help ! SashaM Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L ) 2 01-23-2001 01:10
New!! Nokia Flash Checksum And Contact Service Repair HookerGsM Main Sales Section 0 01-02-2001 09:12


All times are GMT +1. The time now is 01:34.



Powered by Searchlight © 2013 Axivo Inc.
- GSM Hosting Ltd. - 1999-2013 -
Page generated in 0.27450 seconds with 11 queries

SEO by vBSEO