HTC google drea100 after READ CODES - dead - GSM-Forum

mitch_md3 · 07-19-2012, 12:54

@ Medusa team support...

need to know why after READ CODES~phone is dead

here's the log

Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: A01700E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V
CPU : Qualcomm MSM7201A
Core ID : A01700E1
Flash device: Hynix HYH0SSJ0MF3P
Flash ID : 00AD55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Connect successful.
ECC Mode enabled.
Rading codes. Please wait...
ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security.
ECC Mode disabled.
Rading codes. Please wait...
ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security.
Disconnected
Connecting to server
Retrieving files list
Selected device model: HTC Dream (DREA100)
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: A01700E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V
CPU : Qualcomm MSM7201A
Core ID : A01700E1
Flash device: Hynix HYH0SSJ0MF3P
Flash ID : 00AD55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Connect successful.
Opening "C:\Documents and Settings\Angel\My Documents\HTC Dream (DREA100) Boot 20-07-2012 05_31_51.bin" file...
Writting BOOT section. Please wait... Done
Disconnected

i'm supposed to unlock the phone and now dead.

tried the following steps to survive the phone;
1. write-back-up Dream (DREA100) Boot 20-07-2012 05_31_51.bin (failed)
2. Press and hold the Home + Power key (failed)
3. Press and hold "Vol-"+"Power On" keys. (failed)

currently im DL the HTC_DREAM_Repair.mf and HTC_DREAM_FullFlash.mf.

.....

mitch_md3

mitch_md3 · 07-19-2012, 13:08

some info from the phone

mitch_md3

mitch_md3 · 07-20-2012, 02:07

boot BACK UP before pressing the Read codes

CPU is supported from HERE

any help from medusa team?

mitch_md3

Medusa Box · 07-20-2012, 08:45

Hello.
1. Your phone's revision differs from the supported one, that's why codes were not read.
2. Your phone became dead after You have written some *.bin file (not after Read codes procedure)!!!
3. We will try to prepare test version and new boot file (for your phone's revision) and then we will contact You.

mitch_md3 · 07-20-2012, 11:13

Quote:

Originally Posted by Medusa Box

Hello.
1. Your phone's revision differs from the supported one, that's why codes were not read.

perhaps... and if only have a warning. maybe i won't do it...

Quote:

2. Your phone became dead after You have written some *.bin file (not after Read codes procedure)!!!

absolutely no... firstly, i back-up the boot then, press the Read codes botton then it goes error [38]... after the error i quickly assemble the phone and check either the phone is still alive or dead... sadly - dead (even emergency boot-faileD)
ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security.
.. and you can also check in the first thread the way i done.

Quote:

3. We will try to prepare test version and new boot file (for your phone's revision) and then we will contact You.

how long should i wait?

Medusa Box · 07-20-2012, 13:16

Quote:

absolutely no... firstly, i back-up the boot then, press the Read codes botton then it goes error [38]... after the error i quickly assemble the phone and check either the phone is still alive or dead... sadly - dead (even emergency boot-faileD)
ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security.
.. and you can also check in the first thread the way i done.

Connect, Read Codes and Read Flash - are totally safe operations, not possible to damage phone by these operations!

Quote:

how long should i wait?

This will take some time... When it will be ready - we will contact You to your PM.

mitch_md3 · 07-20-2012, 14:02

Quote:

Connect, Read Codes and Read Flash - are totally safe operations, not possible to damage phone by these operations!

well, in that case how come the phone get dead? it's because of this "1. Your phone's revision differs from the supported one, that's why codes were not read."...
if only i knew this will happen i will surely get a video before and after the operation i did to prove to the team that i'm telling the truth.

Quote:

This will take some time... When it will be ready - we will contact You to your PM.

please make it prior...

i only have this gsmbox (medusa) for jtag.

anyway, thanks for the reply.

mitch_md3

mitch_md3 · 07-26-2012, 03:18

good day medusa team,

its already week after the phone was dead by your box... so, any good news?

mitch_md3

mitch_md3 · 07-26-2012, 06:41

after write HTC_DREAM_Repair.mf ...

Selected device model: HTC Dream (DREA100)
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: A01700E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V
CPU : Qualcomm MSM7201A
Core ID : A01700E1
Flash device: Hynix HYH0SSJ0MF3P
Flash ID : 00AD55BA Page size : 2048 bytes
Block size : 64 pages (128 Kb) Block count: 2048
Flash size : 256 Mb Connect successful.
Disconnected Selected device model: HTC Dream (DREA100)
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: A01700E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V CPU : Qualcomm MSM7201A
Core ID : A01700E1
Flash device: Hynix HYH0SSJ0MF3P
Flash ID : 00AD55BA Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Opening "D:\Medusa File\Flash File\HTC\HTC dream (drea100)\HTC_DREAM_Repair.mf" file...
Writting BOOT section. Please wait... Done
Writting APPBOOT section. Please wait... Done
Repairing CID and IMEI...
Done Disconnected
Repair done.
Selected device model: HTC Dream (DREA100)
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: A01700E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V CPU : Qualcomm MSM7201A
Core ID : A01700E1
Flash device: Hynix HYH0SSJ0MF3P
Flash ID : 00AD55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
HTC CID : HTC__001
IMEI : 358279-01-850886
Connect successful.

still dead...

mitch_md3

Medusa Box · 07-27-2012, 08:06

Please check your PM for Beta software version and new boot file.

mitch_md3 · 07-27-2012, 09:49

Welcome to Medusa Box Software version 1.5.0.5T
Selected device model: HTC Dream (DREA100)
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: A01700E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V
CPU : Qualcomm MSM7201A
Core ID : A01700E1
Flash device: Hynix HYH0SSJ0MF3P
Flash ID : 00AD55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Connect successful.
Opening "D:\Medusa File\Update installer\htc_boot1.bin" file...
Writting BOOT section. Please wait... Done

assembling the phone...

mitch_md3

mitch_md3 · 07-27-2012, 09:57

still negative...

am using Advance Mode...

and now, i will try for EasyReapair Mode..

mitcH-md3

mitch_md3 · 07-27-2012, 10:21

writing htc_boot1 while in Advance Mode..

writing htc_boot1 while an EasyRepair Mode..

mitch_md3

Medusa Box · 07-27-2012, 12:26

Have You tried to put the phone into Emergency Mode after of Repair boot in Advanced Mode?

mitch_md3 · 07-27-2012, 12:32

yes, already done but nothing happened

Quote:

Press and hold the Home + Power key
Press and hold "Vol-"+"Power On" keys

can i use erase then flash it with this file HTC_DREAM_FullFlash.mf (its from support site)?

mitch_md3

07-19-2012, 12:54	#1 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	HTC google drea100 after READ CODES - dead @ Medusa team support... need to know why after READ CODES~phone is dead here's the log Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: A01700E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7201A Core ID : A01700E1 Flash device: Hynix HYH0SSJ0MF3P Flash ID : 00AD55BA Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Connect successful. ECC Mode enabled. Rading codes. Please wait... ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security. ECC Mode disabled. Rading codes. Please wait... ERROR[038]: HTC security partition not found or damaged. Please make sure that You selected correct device model, do EasyRepair to rebuild security. Disconnected Connecting to server Retrieving files list Selected device model: HTC Dream (DREA100) Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: A01700E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7201A Core ID : A01700E1 Flash device: Hynix HYH0SSJ0MF3P Flash ID : 00AD55BA Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Connect successful. Opening "C:\Documents and Settings\Angel\My Documents\HTC Dream (DREA100) Boot 20-07-2012 05_31_51.bin" file... Writting BOOT section. Please wait... Done Disconnected i'm supposed to unlock the phone and now dead. tried the following steps to survive the phone; 1. write-back-up Dream (DREA100) Boot 20-07-2012 05_31_51.bin (failed) 2. Press and hold the Home + Power key (failed) 3. Press and hold "Vol-"+"Power On" keys. (failed) currently im DL the HTC_DREAM_Repair.mf and HTC_DREAM_FullFlash.mf. ..... mitch_md3

07-26-2012, 06:41	#9 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	after write HTC_DREAM_Repair.mf ... Selected device model: HTC Dream (DREA100) Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: A01700E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7201A Core ID : A01700E1 Flash device: Hynix HYH0SSJ0MF3P Flash ID : 00AD55BA Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Connect successful. Disconnected Selected device model: HTC Dream (DREA100) Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: A01700E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7201A Core ID : A01700E1 Flash device: Hynix HYH0SSJ0MF3P Flash ID : 00AD55BA Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Opening "D:\Medusa File\Flash File\HTC\HTC dream (drea100)\HTC_DREAM_Repair.mf" file... Writting BOOT section. Please wait... Done Writting APPBOOT section. Please wait... Done Repairing CID and IMEI... Done Disconnected Repair done. Selected device model: HTC Dream (DREA100) Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: A01700E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7201A Core ID : A01700E1 Flash device: Hynix HYH0SSJ0MF3P Flash ID : 00AD55BA Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb HTC CID : HTC__001 IMEI : 358279-01-850886 Connect successful. still dead... mitch_md3 Last edited by mitch_md3; 07-26-2012 at 06:48.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
PIN1/PIN2 CODE	Jon	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	12-26-2012 03:40
Help: Forgot my 6110 user lock code!!	GByte9	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	05-10-2012 14:14
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	09-22-2011 15:55
5110 Security Code Help!	cahrisma	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	07-05-2010 09:04

07-19-2012, 13:08	#2 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	some info from the phone mitch_md3

07-20-2012, 02:07	#3 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	boot BACK UP before pressing the Read codes CPU is supported from HERE any help from medusa team? mitch_md3

07-20-2012, 08:45	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Hello. 1. Your phone's revision differs from the supported one, that's why codes were not read. 2. Your phone became dead after You have written some *.bin file (not after Read codes procedure)!!! 3. We will try to prepare test version and new boot file (for your phone's revision) and then we will contact You.

07-26-2012, 03:18	#8 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	good day medusa team, its already week after the phone was dead by your box... so, any good news? mitch_md3

07-27-2012, 08:06	#10 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Please check your PM for Beta software version and new boot file.

07-27-2012, 09:49	#11 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	Welcome to Medusa Box Software version 1.5.0.5T Selected device model: HTC Dream (DREA100) Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: A01700E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7201A Core ID : A01700E1 Flash device: Hynix HYH0SSJ0MF3P Flash ID : 00AD55BA Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 2048 Flash size : 256 Mb Connect successful. Opening "D:\Medusa File\Update installer\htc_boot1.bin" file... Writting BOOT section. Please wait... Done assembling the phone... mitch_md3

07-27-2012, 09:57	#12 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	still negative... am using Advance Mode... and now, i will try for EasyReapair Mode.. mitcH-md3

07-27-2012, 10:21	#13 (permalink)
mitch_md3 Freak Poster Join Date: Oct 2005 Location: Dipolog City Posts: 336 Member: 187319 Status: Offline Sonork: 100.1593798 Thanks: 1,721 Thanked 71 Times in 45 Posts	writing htc_boot1 while in Advance Mode.. writing htc_boot1 while an EasyRepair Mode.. mitch_md3

07-27-2012, 12:26	#14 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Have You tried to put the phone into Emergency Mode after of Repair boot in Advanced Mode?