Huawei CHE2-L11 eMMC dump request [Answered] - GSM-Forum

mutewitness · 11-07-2018, 13:11

set come with dead condition i replace emmc with new one because old emmc not detect
new emmc succesfully configure all
but now i dont have dump or srf file to repair or reparation
please help me to solve
or send me dump CHe2-l11 (Huawei honor 4x)
this log for new emmc

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC MAG4FB
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID : 1501004D4147344642F7BC084178AFFB
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : MAG4FB
Full name : KLMAG4FE4B-B002
Product revision : 15.7
Product serial number : (hex) BC084178
Manufacturing date : 10/2012
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFFF8E40406D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 2048 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x02) 00000010
Boot bus width : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7659520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/MAG4FB_07_11_2018_16_25_36.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
Disconnected.

Medusa Box · 11-08-2018, 09:55

At the moment we don't have full flash from this device and we don't have this device to read out full flash from it. Maybe someone has and will upload full flash for You here.

11-07-2018, 13:11	#1 (permalink)
mutewitness Freak Poster Join Date: Oct 2011 Location: Pakistan Posts: 205 Member: 1674109 Status: Offline Thanks Meter: 36	Huawei CHE2-L11 eMMC dump request [Answered] set come with dead condition i replace emmc with new one because old emmc not detect new emmc succesfully configure all but now i dont have dump or srf file to repair or reparation please help me to solve or send me dump CHe2-l11 (Huawei honor 4x) this log for new emmc Model Settings: Interface : eMMC Voltage : 1.8V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Samsung eMMC MAG4FB Page size : 512 B Block size : 512 B Block count : 30777344 Size : 14.68 GB (15028.00 MB) --------------------------------------------------------------- CID Info CID : 1501004D4147344642F7BC084178AFFB Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : MAG4FB Full name : KLMAG4FE4B-B002 Product revision : 15.7 Product serial number : (hex) BC084178 Manufacturing date : 10/2012 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFFF8E40406D CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.6 (for MMC v4.5, v4.51) Erase block size : 512 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 2048 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 8Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x02) 00000010 Boot bus width : x8 (sdr/ddr) bus width in boot operation mode Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 7659520 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/MAG4FB_07_11_2018_16_25_36.bin. Connect successful. --------------------------------------------------------------- SW: 1.6.6; FW: 1.24. Disconnected. Last edited by Medusa Box; 11-08-2018 at 09:55.

11-08-2018, 09:55	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	At the moment we don't have full flash from this device and we don't have this device to read out full flash from it. Maybe someone has and will upload full flash for You here.