huawei cun-u29 repaire emmc [Answered] - GSM-Forum

kaka88 · 01-09-2020, 19:22

1st World repaire emmc huawei cun-u29

CONECT EMMC AND LOGO

Code:

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC FN12MB
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100464E31324D42062657A76783B7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : FN12MB
Product revision      : 0.6
Product serial number : (hex) 2657A767
Manufacturing date    : 08/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.1; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC FN12MB
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100464E31324D42062657A76783B7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : FN12MB
Product revision      : 0.6
Product serial number : (hex) 2657A767
Manufacturing date    : 08/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_41.bin.
Connect successful.
---------------------------------------------------------------

FACTORY FORMAT

Code:

CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.1; FW: 1.24.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 2.0.1; FW: 1.24.
Disconnected.

WRITE FILE SCATTER

Code:

كود:
--------------------------------------------------------------
Selected scatter file: C:/Users/PC/Desktop/MT6582_CUN-U29_HUAWEI CUN-U29_unknown_5.1_HUAWEI_CUN-U29C567B134_2017-08-20 14_33_36/MT6582_Android_scatter_emmc.txt.
Scatter file type 2.
Opened input file: C:/Users/PC/Desktop/MT6582_CUN-U29_HUAWEI CUN-U29_unknown_5.1_HUAWEI_CUN-U29C567B134_2017-08-20 14_33_36/preloader_hq6582_we_b1b_l1.bin

Found 8 eMMC supported CID:

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : FN12MB
eMMC CID         : 150100464E31324D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : H8G1e
eMMC CID         : 90014A483847316505

eMMC Vendor ID   : 11 (Toshiba eMMC)
eMMC Model ID    : 0001
eMMC Name        : 008G70
eMMC CID         : 110100303038473730

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : HAG4d
eMMC CID         : 90014A484147346404

eMMC Vendor ID   : 11 (Toshiba eMMC)
eMMC Model ID    : 0001
eMMC Name        : 016G94
eMMC CID         : 110100303136473934

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : K8XVMB
eMMC CID         : 1501004B3858564D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : H8G4a2
eMMC CID         : 90014A483847346132

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : FNX2MB
eMMC CID         : 150100464E58324D42

Writing. Please wait...
Write data verification is enabled.
Writing partition PRELOADER...	Write data verification is enabled.
Done.
Writing partition MBR...	Done.
Writing partition EBR1...	Done.
Writing partition PRO_INFO...	Done.
Writing partition NVRAM...	Done.
Writing partition PROTECT_F...	Done.
Writing partition PROTECT_S...	Done.
Writing partition OEMINFO...	Done.
Writing partition SECCFG...	Done.
Writing partition UBOOT...	Done.
Writing partition BOOTIMG...	Done.
Writing partition RECOVERY...	Done.
Writing partition SEC_RO...	Done.
Writing partition MISC...	Done.
Writing partition LOGO...	Done.
Writing partition EBR2...	Done.
Writing partition EXPDB...	Done.
Writing partition FRP...	Done.
Writing partition ROOTM...	Done.
Writing partition ANDROID...	Done.
Writing partition CUST...	Done.
Writing partition CACHE...	Done.
Writing partition USRDATA...	Done.
Writing checksums...Done.
Writing finished.
SW: 2.0.1; FW: 1.24

starkrimes · 01-09-2020, 19:44

please can you post full log after repair done

cause when you formatted the emmc you didn't edit geometry boot 1 & 2 + rpmb

kaka88 · 01-09-2020, 20:08

Quote:

Originally Posted by starkrimes

please can you post full log after repair done

cause when you formatted the emmc you didn't edit geometry boot 1 & 2 + rpmb

Sorry, the phone was taken by its owner
The flash file was written and imie corrected and worked well

starkrimes · 01-09-2020, 20:25

Quote:

Originally Posted by kaka88

Sorry, the phone was taken by its owner
The flash file was written and imie corrected and worked well

you can navigate to medusa pro 2 logs path and post it here

kaka88 · 01-09-2020, 20:59

Quote:

Originally Posted by starkrimes

you can navigate to medusa pro 2 logs path and post it here

Same log in the topic...

starkrimes · 01-10-2020, 15:10

Quote:

Originally Posted by kaka88

Same log in the topic...

i'm asking for the complete log after format

post it here please

01-09-2020, 19:44	#2 (permalink)
starkrimes No Life Poster Join Date: Dec 2009 Location: Laghouat, Algeria Age: 30 Posts: 541 Member: 1191316 Status: Offline Thanks Meter: 900	please can you post full log after repair done cause when you formatted the emmc you didn't edit geometry boot 1 & 2 + rpmb