HUAWEI E5832s repair [Solved] - GSM-Forum

bossko · 12-06-2013, 12:11

Hi, I have one E5382s modem with flashed by mistake E5832 firmware.
After this modem was partial death - wont turn on, but pc detect download mode by pressing connect+power button. But cant find any firmware to flash it. Still give error. After repair boot via medusa, modem cant turn on, only with download logo on lcd. Then try to Flash with file from DC-FILES for E5832s and give error at end of flashing. With another working E5832s customized to O2 make Flash with this file no problem. After this cant power this modem, only freeze to boot logo. Now I cant Flash this modem. When I try forced download with connect+poweron and "UPDATE??" on lcd, pc dont recognize my device. any help pls?

Octopus box · 12-06-2013, 13:18

Hello.
Please connect the device in Advanced Mode and make Erase Full flash; then connect the device in EasyRepair Mode and make Repair. Post here the result.

bossko · 12-06-2013, 16:24

thanks for reply, but same result

bossko · 12-06-2013, 16:47

now i try read full flash for working one and write to this death
I have 5pcs from O2 and want original firmware with webinterface
flash from DC-FILES havent webinterface.
you havent it please?

islamic.tj · 12-06-2013, 18:41

log post here .

bossko · 12-06-2013, 19:32

Log started at 6.12.2013 9:49:40 ...
Welcome to Medusa Box Software version 2.0.9
Operating Mode: Advanced Mode
Selected device model: Huawei E5832S
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: C01B00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.62 V
CPU : Qualcomm MSM7225
Core ID : C01B00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0EC15A1.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Samsung K5G1G13ACH
Flash ID : 00EC15A1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D
MI: Configuration done.
Connect successful.
ECC Mode enabled.
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_E5832S_Repa ir.mf" file...
Writing BOOT section. Please wait... Done
Writing FIRMWARE section. Please wait... Done

bossko · 12-06-2013, 19:38

Log started at 6.12.2013 16:01:54 ...
Welcome to Medusa Box Software version 2.0.9
Operating Mode: Advanced Mode
Selected device model: Huawei E5832S
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: C01B00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 1.35 V
CPU : Qualcomm MSM7225
Core ID : C01B00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0EC15A1.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Samsung K5G1G13ACH
Flash ID : 00EC15A1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D
MI: Configuration done.
Connect successful.
ECC Mode enabled.
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
Disconnected
Operating Mode: EasyRepair Mode
Selected device model: Huawei E5832S
Connecting. Please wait...
MI: RTCK reaction time 126 ns, average speed 7936 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: C01B00E1, IR Length = 4.
ERROR[032]: Target device Core has disabled JTAG/EmbeddedICE.
MI: Halting target, attempt 1.
MI: Halting target, attempt 2.
MI: Halting target, attempt 3.
ERROR[000]: Unable to halt core.
Please connect the target device and power it on...
MI: RTCK reaction time 126 ns, average speed 7936 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: C01B00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.61 V
CPU : Qualcomm MSM7225
Core ID : C01B00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0EC15A1.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Samsung K5G1G13ACH
Flash ID : 00EC15A1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D
MI: Configuration done.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_E5832S_Repa ir.mf" file...
Writing BOOT section. Please wait... Done
Writing FIRMWARE section. Please wait... Done
Disconnected
Repair done.
Operating Mode: Advanced Mode
Selected device model: Huawei E5832S
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: C01B00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.56 V
CPU : Qualcomm MSM7225
Core ID : C01B00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0EC15A1.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Samsung K5G1G13ACH
Flash ID : 00EC15A1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D
MI: Configuration done.
Connect successful.
ECC Mode enabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S FullFlash 06-12-2013 16_42_20.bin" file...
Reading BOOT section. Please wait... Done
Reading FIRMWARE section. Please wait... Done
Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S Boot 06-12-2013 17_05_20_O2.bin" file...
Reading BOOT section. Please wait... Done
Disconnected
Operating Mode: Advanced Mode
Selected device model: Huawei E5832S
Connecting. Please wait...
MI: RTCK reaction time 3669 ns, average speed 272 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: C01B00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V
CPU : Qualcomm MSM7225
Core ID : C01B00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0xFFFFFFFF, cycle 1.
MI: Received status 0xFFFFFFFF, cycle 2.
MI: Failed to start Medusa Device Server.
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Operating Mode: Advanced Mode
Selected device model: Huawei E5832S
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: C01B00E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.58 V
CPU : Qualcomm MSM7225
Core ID : C01B00E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0EC15A1.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Samsung K5G1G13ACH
Flash ID : 00EC15A1
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 1024
Flash size : 128 Mb
MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D
MI: Configuration done.
Connect successful.
ECC Mode enabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S FullFlash 06-12-2013 17_06_41_DEATH.bin" file...
Reading BOOT section. Please wait... Done
Reading FIRMWARE section. Please wait... Done
Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S FullFlash 06-12-2013 16_42_20.bin" file...
Writing BOOT section. Please wait... Done
Writing FIRMWARE section. Please wait... Done

Octopus box · 12-07-2013, 09:38

So, what is the result? Has your "dead" device been repaired after You have written Full flash ("Huawei E5832S FullFlash 06-12-2013 16_42_20.bin") from the same working one?

bossko · 12-07-2013, 16:57

result is download mode with black arrow in white circle as is on picture

bossko · 12-07-2013, 18:35

hi, now i have 4pcs with original O2 firmware with webinterface. modems are unlocked and fully working, but must manually setup connection profiles to each operators in Slovak republic. 5th one have firmware with NETVIGATOR firmware with webinterface, but i didnt find connection profile settings. cant setup apn settings. last one is at download mode with black arrow in white cirrcle. need help with one with netvigator firmware. i thing its original Huawei, but need profile setting...

bossko · 12-07-2013, 19:50

this file:
http://dc-files.com/files/huawei/mod....17.05.309.zip
is customized to this operator:
PCCW-HKT mobile service
need original Huawei Flash file

islamic.tj · 12-07-2013, 21:50

Quote:

Originally Posted by bossko

this file:
http://dc-files.com/files/huawei/mod....17.05.309.zip
is customized to this operator:
PCCW-HKT mobile service
need original Huawei Flash file

from site dc unlocker firmware not worked

here tested firmware link

bossko · 12-08-2013, 08:16

hi, this file is for slovak O2 and its working perfect. thanks a lot!

Octopus box · 12-08-2013, 10:49

Ok, please also upload somewhere Full flash from your device ("Huawei E5832S FullFlash 06-12-2013 16_42_20.bin") and post here link; we will upload it into the Support Area for all our users.

bossko · 12-08-2013, 12:34

hi, now is my death device fully working, but with same IMEI as readed one.
after repair with this bin file, i was flash with E5832sUpdate_956.11.17.08.309sp03 and then with WLE5832S3095001_ALL_VERSION_V100R001C365B311_USB.
I will read this device with this latest slovak firmware with working apn settings and after this will upload to MEGA. regards and thanks for your time!

12-06-2013, 13:18	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. Please connect the device in Advanced Mode and make Erase Full flash; then connect the device in EasyRepair Mode and make Repair. Post here the result.

12-06-2013, 16:24	#3 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	thanks for reply, but same result

12-06-2013, 16:47	#4 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	now i try read full flash for working one and write to this death I have 5pcs from O2 and want original firmware with webinterface flash from DC-FILES havent webinterface. you havent it please?

12-06-2013, 18:41	#5 (permalink)
islamic.tj No Life Poster Join Date: Mar 2011 Location: Tadjikistan, Dushanbe Age: 35 Posts: 552 Member: 1533366 Status: Offline Thanks Meter: 131	log post here .

12-06-2013, 19:32	#6 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	Log started at 6.12.2013 9:49:40 ... Welcome to Medusa Box Software version 2.0.9 Operating Mode: Advanced Mode Selected device model: Huawei E5832S Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. MI: RTCK reaction time 189 ns, average speed 5291 KHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: C01B00E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : Auto (RTCK). VREF level : 2.62 V CPU : Qualcomm MSM7225 Core ID : C01B00E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0xFFFFFFFF, cycle 0. MI: Received status 0x0000F00F, cycle 1. MI: Received server capabilities 0x00000037. MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0xA0EC15A1. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000037 Flash device: Samsung K5G1G13ACH Flash ID : 00EC15A1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D MI: Configuration done. Connect successful. ECC Mode enabled. Write protection disabled. Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_E5832S_Repa ir.mf" file... Writing BOOT section. Please wait... Done Writing FIRMWARE section. Please wait... Done

12-06-2013, 19:38	#7 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	Log started at 6.12.2013 16:01:54 ... Welcome to Medusa Box Software version 2.0.9 Operating Mode: Advanced Mode Selected device model: Huawei E5832S Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. MI: RTCK reaction time 189 ns, average speed 5291 KHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: C01B00E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : Auto (RTCK). VREF level : 1.35 V CPU : Qualcomm MSM7225 Core ID : C01B00E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0xFFFFFFFF, cycle 0. MI: Received status 0x0000F00F, cycle 1. MI: Received server capabilities 0x00000037. MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0xA0EC15A1. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000037 Flash device: Samsung K5G1G13ACH Flash ID : 00EC15A1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D MI: Configuration done. Connect successful. ECC Mode enabled. Erasing BOOT section. Please wait... Done Erasing FIRMWARE section. Please wait... Done Disconnected Operating Mode: EasyRepair Mode Selected device model: Huawei E5832S Connecting. Please wait... MI: RTCK reaction time 126 ns, average speed 7936 KHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: C01B00E1, IR Length = 4. ERROR[032]: Target device Core has disabled JTAG/EmbeddedICE. MI: Halting target, attempt 1. MI: Halting target, attempt 2. MI: Halting target, attempt 3. ERROR[000]: Unable to halt core. Please connect the target device and power it on... MI: RTCK reaction time 126 ns, average speed 7936 KHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: C01B00E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : Auto (RTCK). VREF level : 2.61 V CPU : Qualcomm MSM7225 Core ID : C01B00E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0x0000F00F, cycle 0. MI: Received server capabilities 0x00000037. MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0xA0EC15A1. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000037 Flash device: Samsung K5G1G13ACH Flash ID : 00EC15A1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D MI: Configuration done. Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_E5832S_Repa ir.mf" file... Writing BOOT section. Please wait... Done Writing FIRMWARE section. Please wait... Done Disconnected Repair done. Operating Mode: Advanced Mode Selected device model: Huawei E5832S Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. MI: RTCK reaction time 189 ns, average speed 5291 KHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: C01B00E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : Auto (RTCK). VREF level : 2.56 V CPU : Qualcomm MSM7225 Core ID : C01B00E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0xFFFFFFFF, cycle 0. MI: Received status 0x0000F00F, cycle 1. MI: Received server capabilities 0x00000037. MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0xA0EC15A1. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000037 Flash device: Samsung K5G1G13ACH Flash ID : 00EC15A1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D MI: Configuration done. Connect successful. ECC Mode enabled. Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S FullFlash 06-12-2013 16_42_20.bin" file... Reading BOOT section. Please wait... Done Reading FIRMWARE section. Please wait... Done Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S Boot 06-12-2013 17_05_20_O2.bin" file... Reading BOOT section. Please wait... Done Disconnected Operating Mode: Advanced Mode Selected device model: Huawei E5832S Connecting. Please wait... MI: RTCK reaction time 3669 ns, average speed 272 KHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: C01B00E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7225 Core ID : C01B00E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0xFFFFFFFF, cycle 0. MI: Received status 0xFFFFFFFF, cycle 1. MI: Received status 0xFFFFFFFF, cycle 2. MI: Failed to start Medusa Device Server. ERROR[004]: Medusa Device Server did not replied to HELLO command. Operating Mode: Advanced Mode Selected device model: Huawei E5832S Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. MI: RTCK reaction time 189 ns, average speed 5291 KHz. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: C01B00E1, IR Length = 4. MI: Halting target, attempt 1. JTAG speed : Auto (RTCK). VREF level : 2.58 V CPU : Qualcomm MSM7225 Core ID : C01B00E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0xFFFFFFFF, cycle 0. MI: Received status 0x0000F00F, cycle 1. MI: Received server capabilities 0x00000037. MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0xA0EC15A1. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000037 Flash device: Samsung K5G1G13ACH Flash ID : 00EC15A1 Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 1024 Flash size : 128 Mb MI: Setting configuration: 0xA2D400C0, 0x0004745C, 0x0000001D MI: Configuration done. Connect successful. ECC Mode enabled. Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S FullFlash 06-12-2013 17_06_41_DEATH.bin" file... Reading BOOT section. Please wait... Done Reading FIRMWARE section. Please wait... Done Opening "C:\Program Files\GsmServer\Medusa\Firmware\Huawei E5832S FullFlash 06-12-2013 16_42_20.bin" file... Writing BOOT section. Please wait... Done Writing FIRMWARE section. Please wait... Done

12-07-2013, 09:38	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	So, what is the result? Has your "dead" device been repaired after You have written Full flash ("Huawei E5832S FullFlash 06-12-2013 16_42_20.bin") from the same working one?

12-07-2013, 16:57	#9 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	result is download mode with black arrow in white circle as is on picture

12-07-2013, 18:35	#10 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	hi, now i have 4pcs with original O2 firmware with webinterface. modems are unlocked and fully working, but must manually setup connection profiles to each operators in Slovak republic. 5th one have firmware with NETVIGATOR firmware with webinterface, but i didnt find connection profile settings. cant setup apn settings. last one is at download mode with black arrow in white cirrcle. need help with one with netvigator firmware. i thing its original Huawei, but need profile setting...

12-07-2013, 19:50	#11 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	this file: http://dc-files.com/files/huawei/mod....17.05.309.zip is customized to this operator: PCCW-HKT mobile service need original Huawei Flash file

12-08-2013, 08:16	#13 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	hi, this file is for slovak O2 and its working perfect. thanks a lot!

12-08-2013, 10:49	#14 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Ok, please also upload somewhere Full flash from your device ("Huawei E5832S FullFlash 06-12-2013 16_42_20.bin") and post here link; we will upload it into the Support Area for all our users.

12-08-2013, 12:34	#15 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	hi, now is my death device fully working, but with same IMEI as readed one. after repair with this bin file, i was flash with E5832sUpdate_956.11.17.08.309sp03 and then with WLE5832S3095001_ALL_VERSION_V100R001C365B311_USB. I will read this device with this latest slovak firmware with working apn settings and after this will upload to MEGA. regards and thanks for your time!