Huawei Nova CAN-L11 USB loader request [Solved] - GSM-Forum

kerpua · 12-24-2018, 08:06

HUAWEI NOVA WENT IS QUALCOM MODE ,I TRYED TO CONNRCT WITH MEDUZA BUT NO RESULT ,PLEASE ADD IT

Welcome to Medusa Pro Software version 1.7.0.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Gemalto e-gate Smart Card 0

Model Settings:
Interface : USB
Core : Auto Detect
Loader : Auto Detect

Connecting...
Cancelled.

Model Settings:
Interface : USB
Core : Qualcomm MSM8953
Loader : QLoader_v1_Lenovo

Connecting...
Cancelled.

Model Settings:
Interface : USB
Core : Qualcomm MSM8953
Loader : QLoader_v2_Xiaomi

Connecting...
Cancelled.

Medusa Box · 12-26-2018, 06:13

Hello.

Unfortunately, we don't have proper USB Qualcomm loader for this device at the moment. We will try to find and, if we find, we will add it to Software. If You have good experience in soldering, You can remove (desolder) eMMC from device PCB, solder necessary wires directly to eMMC contacts (or use proper eMMC adapter for direct connecting), do "Factory Repair" and then solder eMMC back to PCB.

rebainoor · 12-26-2018, 12:50

Already send you this loader

Medusa Box · 12-26-2018, 12:57

Yes, thanks, we will prepare test Software version for Mr. kerpua and will send him for test.

Medusa Box · 12-26-2018, 13:40

@ kerpua

We have prepared test Software version for You with new Huawei USB loader - "8953 - v43_Huawei" (last in the list). Try to connect your device using this loader and post the result.

kerpua · 12-26-2018, 13:59

Welcome to Medusa Pro Software version 1.7.1.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1

Model Settings:
Interface : USB
Core : Qualcomm MSM8953
Loader : QLoader_v43_Huawei

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_000460E1
Core : Qualcomm MSM8953
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.1; FW: 1.24.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00000400) 512 KB
P02: rpm (00000422, 00000400) 512 KB
P03: tz (00000822, 00001000) 2048 KB
P04: devcfg (00001822, 00000200) 256 KB
P05: aboot (00001A22, 00004000) 8 MB
P06: cmnlib (00005A22, 00000200) 256 KB
P07: cmnlib64 (00005C22, 00000200) 256 KB
P08: keymaster (00005E22, 00000200) 256 KB
P09: sbl1bak (00006022, 00000400) 512 KB
P10: rpmbak (00006422, 00000400) 512 KB
P11: tzbak (00006822, 00001000) 2048 KB
P12: devcfgbak (00007822, 00000200) 256 KB
P13: abootbak (00007A22, 00004000) 8 MB
P14: cmnlibbak (0000BA22, 00000200) 256 KB
P15: cmnlib64bak (0000BC22, 00000200) 256 KB
P16: keymasterbak (0000BE22, 00000200) 256 KB
P17: oeminfo (0000C022, 00020000) 64 MB
P18: fsg (0002C022, 00002000) 4 MB
P19: modemst1 (0002E022, 00002000) 4 MB
P20: modemst2 (00030022, 00002000) 4 MB
P21: modem (00032022, 00050000) 160 MB
P22: fsc (00082022, 00000002) 1024 b
P23: ssd (00082024, 00000010) 8 KB
P24: dsp (00082034, 00008000) 16 MB
P25: DDR (0008A034, 00000040) 32 KB
P26: sec (0008A074, 00000020) 16 KB
P27: nff (0008A094, 00004000) 8 MB
P28: splash (0008E094, 00005800) 11 MB
P29: misc (00093894, 00002000) 4 MB
P30: boot (00095894, 00028000) 80 MB
P31: recovery (000BD894, 00028000) 80 MB
P32: erecovery (000E5894, 00028000) 80 MB
P33: devinfo (00110000, 00000800) 1024 KB
P34: cache (00118000, 00080000) 256 MB
P35: pad0 (00198000, 00003800) 7 MB
P36: persist (0019B800, 00020000) 64 MB
P37: log (001BB800, 00020000) 64 MB
P38: keystore (001DB800, 00000400) 512 KB
P39: config (001DBC00, 00000400) 512 KB
P40: limits (001DC000, 00000040) 32 KB
P41: mota (001DC040, 00000400) 512 KB
P42: dip (001DC440, 00000800) 1024 KB
P43: mdtp (001DCC40, 00010000) 32 MB
P44: syscfg (001ECC40, 00000400) 512 KB
P45: mcfg (001ED040, 00002000) 4 MB
P46: lksecapp (001EF040, 00000100) 128 KB
P47: lksecappbak (001EF140, 00000100) 128 KB
P48: apdp (001EF240, 00000200) 256 KB
P49: msadp (001EF440, 00000200) 256 KB
P50: dpo (001EF640, 00000010) 8 KB
P51: rrecord (001EF650, 00008000) 16 MB
P52: cust (001F8000, 00100000) 512 MB
P53: system (002F8000, 0073A000) 3700 MB
P54: userdata (00A38000, 03005FDF) 24.01 GB

kerpua · 12-26-2018, 14:04

now i need full dump ?

rebainoor · 12-26-2018, 14:06

but you can repaire if if you have XML firmware format or if you have working mobile to read and create srf file to repaire your dead mobile

good luck

kerpua · 12-26-2018, 14:21

i have no working phone to read and create srf file and there is no xml file i think

kerpua · 12-26-2018, 14:28

how to read full dump with meduza pro>?

Medusa Box · 12-26-2018, 14:34

Connect the device, select "Full Flash" option and press "Read" button.

rebainoor · 12-26-2018, 14:36

after connection with phone :

clic on constructor and select all partitions or needed partitions to create srf file

kerpua · 12-28-2018, 07:56

dear support team i ask all member of this great meduza tool read and upload huawei nova can-l11 full flash file .or at least modem ,modemst1 and modem st2 file ? please i need it ...

Medusa Box · 12-28-2018, 08:05

At the moment we don't have this device in hands. We will try to find/buy this device and upload SRF/Full flash for it in future Software updates.

kerpua · 02-21-2019, 14:39

can i have loader for my can-l11 ? need to write efs ,but i need this file for edl writing?

12-24-2018, 08:06	#1 (permalink)
kerpua No Life Poster Join Date: May 2008 Location: Georgia Posts: 999 Member: 772384 Status: Offline Thanks Meter: 40	Huawei Nova CAN-L11 USB loader request [Solved] HUAWEI NOVA WENT IS QUALCOM MODE ,I TRYED TO CONNRCT WITH MEDUZA BUT NO RESULT ,PLEASE ADD IT Welcome to Medusa Pro Software version 1.7.0. Started. Reader #0: Alcor Micro USB Smart Card Reader 0 Reader #1: Alcor Micro USB Smart Card Reader 1 Reader #2: Gemalto e-gate Smart Card 0 Model Settings: Interface : USB Core : Auto Detect Loader : Auto Detect Connecting... Cancelled. Model Settings: Interface : USB Core : Qualcomm MSM8953 Loader : QLoader_v1_Lenovo Connecting... Cancelled. Model Settings: Interface : USB Core : Qualcomm MSM8953 Loader : QLoader_v2_Xiaomi Connecting... Cancelled. Last edited by Medusa Box; 12-27-2018 at 05:30.

12-26-2018, 06:13	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Hello. Unfortunately, we don't have proper USB Qualcomm loader for this device at the moment. We will try to find and, if we find, we will add it to Software. If You have good experience in soldering, You can remove (desolder) eMMC from device PCB, solder necessary wires directly to eMMC contacts (or use proper eMMC adapter for direct connecting), do "Factory Repair" and then solder eMMC back to PCB.

12-26-2018, 12:50	#3 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,163 Member: 231728 Status: Offline Thanks Meter: 2,103	Already send you this loader

12-26-2018, 12:57	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Yes, thanks, we will prepare test Software version for Mr. kerpua and will send him for test.

12-26-2018, 13:40	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	@ kerpua We have prepared test Software version for You with new Huawei USB loader - "8953 - v43_Huawei" (last in the list). Try to connect your device using this loader and post the result.

12-26-2018, 13:59	#6 (permalink)
kerpua No Life Poster Join Date: May 2008 Location: Georgia Posts: 999 Member: 772384 Status: Offline Thanks Meter: 40	Welcome to Medusa Pro Software version 1.7.1. Started. Reader #0: Alcor Micro USB Smart Card Reader 0 Reader #1: Alcor Micro USB Smart Card Reader 1 Model Settings: Interface : USB Core : Qualcomm MSM8953 Loader : QLoader_v43_Huawei Connecting... Sending loader...OK. Loader successfully initialized. Device : CoreID_000460E1 Core : Qualcomm MSM8953 Page size : 512 B Block size : 512 B Block count : 61071360 Size : 29.12 GB (29820.00 MB) Connect successful. --------------------------------------------------------------- SW: 1.7.1; FW: 1.24. P00: GPT (00000000, 00000022) 17 KB P01: sbl1 (00000022, 00000400) 512 KB P02: rpm (00000422, 00000400) 512 KB P03: tz (00000822, 00001000) 2048 KB P04: devcfg (00001822, 00000200) 256 KB P05: aboot (00001A22, 00004000) 8 MB P06: cmnlib (00005A22, 00000200) 256 KB P07: cmnlib64 (00005C22, 00000200) 256 KB P08: keymaster (00005E22, 00000200) 256 KB P09: sbl1bak (00006022, 00000400) 512 KB P10: rpmbak (00006422, 00000400) 512 KB P11: tzbak (00006822, 00001000) 2048 KB P12: devcfgbak (00007822, 00000200) 256 KB P13: abootbak (00007A22, 00004000) 8 MB P14: cmnlibbak (0000BA22, 00000200) 256 KB P15: cmnlib64bak (0000BC22, 00000200) 256 KB P16: keymasterbak (0000BE22, 00000200) 256 KB P17: oeminfo (0000C022, 00020000) 64 MB P18: fsg (0002C022, 00002000) 4 MB P19: modemst1 (0002E022, 00002000) 4 MB P20: modemst2 (00030022, 00002000) 4 MB P21: modem (00032022, 00050000) 160 MB P22: fsc (00082022, 00000002) 1024 b P23: ssd (00082024, 00000010) 8 KB P24: dsp (00082034, 00008000) 16 MB P25: DDR (0008A034, 00000040) 32 KB P26: sec (0008A074, 00000020) 16 KB P27: nff (0008A094, 00004000) 8 MB P28: splash (0008E094, 00005800) 11 MB P29: misc (00093894, 00002000) 4 MB P30: boot (00095894, 00028000) 80 MB P31: recovery (000BD894, 00028000) 80 MB P32: erecovery (000E5894, 00028000) 80 MB P33: devinfo (00110000, 00000800) 1024 KB P34: cache (00118000, 00080000) 256 MB P35: pad0 (00198000, 00003800) 7 MB P36: persist (0019B800, 00020000) 64 MB P37: log (001BB800, 00020000) 64 MB P38: keystore (001DB800, 00000400) 512 KB P39: config (001DBC00, 00000400) 512 KB P40: limits (001DC000, 00000040) 32 KB P41: mota (001DC040, 00000400) 512 KB P42: dip (001DC440, 00000800) 1024 KB P43: mdtp (001DCC40, 00010000) 32 MB P44: syscfg (001ECC40, 00000400) 512 KB P45: mcfg (001ED040, 00002000) 4 MB P46: lksecapp (001EF040, 00000100) 128 KB P47: lksecappbak (001EF140, 00000100) 128 KB P48: apdp (001EF240, 00000200) 256 KB P49: msadp (001EF440, 00000200) 256 KB P50: dpo (001EF640, 00000010) 8 KB P51: rrecord (001EF650, 00008000) 16 MB P52: cust (001F8000, 00100000) 512 MB P53: system (002F8000, 0073A000) 3700 MB P54: userdata (00A38000, 03005FDF) 24.01 GB

12-26-2018, 14:04	#7 (permalink)
kerpua No Life Poster Join Date: May 2008 Location: Georgia Posts: 999 Member: 772384 Status: Offline Thanks Meter: 40	now i need full dump ?

12-26-2018, 14:06	#8 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,163 Member: 231728 Status: Offline Thanks Meter: 2,103	but you can repaire if if you have XML firmware format or if you have working mobile to read and create srf file to repaire your dead mobile good luck

12-26-2018, 14:21	#9 (permalink)
kerpua No Life Poster Join Date: May 2008 Location: Georgia Posts: 999 Member: 772384 Status: Offline Thanks Meter: 40	i have no working phone to read and create srf file and there is no xml file i think

12-26-2018, 14:28	#10 (permalink)
kerpua No Life Poster Join Date: May 2008 Location: Georgia Posts: 999 Member: 772384 Status: Offline Thanks Meter: 40	how to read full dump with meduza pro>?

12-26-2018, 14:34	#11 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Connect the device, select "Full Flash" option and press "Read" button.

12-26-2018, 14:36	#12 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,163 Member: 231728 Status: Offline Thanks Meter: 2,103	after connection with phone : clic on constructor and select all partitions or needed partitions to create srf file

12-28-2018, 07:56	#13 (permalink)
kerpua No Life Poster Join Date: May 2008 Location: Georgia Posts: 999 Member: 772384 Status: Offline Thanks Meter: 40	dear support team i ask all member of this great meduza tool read and upload huawei nova can-l11 full flash file .or at least modem ,modemst1 and modem st2 file ? please i need it ...

12-28-2018, 08:05	#14 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	At the moment we don't have this device in hands. We will try to find/buy this device and upload SRF/Full flash for it in future Software updates.

02-21-2019, 14:39	#15 (permalink)
kerpua No Life Poster Join Date: May 2008 Location: Georgia Posts: 999 Member: 772384 Status: Offline Thanks Meter: 40	can i have loader for my can-l11 ? need to write efs ,but i need this file for edl writing?