huawei u8180(Kyivstar) problem - GSM-Forum

bazanoff · 04-05-2012, 07:08

hello , after easy repair huawei u8180 didnt enter download mode and didnt power on(( before repair phone was in working condition.help me pls

Medusa Box · 04-05-2012, 07:31

Hello.
1. If your device was in working condition - why You have tried to repair it's boot?
2. Post here full software log with all of your actions.

bazanoff · 04-05-2012, 07:52

Quote:

Originally Posted by Medusa Box

Hello.
1. If your device was in working condition - why You have tried to repair it's boot?
2. Post here full software log with all of your actions.

Selected device model: Huawei U8180
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: C01B30E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.54 V
CPU : Qualcomm MSM7225
Core ID : C01B30E1
Flash device: Hynix H8BES0UQ0MCR
Flash ID : 00AD55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_U8180_Repai r.mf" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done
Disconnected
phone was locked that becose i try to boot repair )))

Medusa Box · 04-05-2012, 08:08

Try to connect the device in Advanced Mode and make Erase Full flash. Then connect it in EasyRepair Mode and Repair it again.

kashifgsm125 · 04-05-2012, 09:47

Quote:

Selected device model: Huawei U8180
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: C01B30E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.54 V
CPU : Qualcomm MSM7225
Core ID : C01B30E1
Flash device: Hynix H8BES0UQ0MCR
Flash ID : 00AD55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_U8180_Repai r.mf" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done
Disconnected
phone was locked that becose i try to boot repair )))

brother try to read info i hope code show

bazanoff · 04-05-2012, 09:52

Quote:

Originally Posted by kashifgsm125

brother try to read info i hope code show

too late , phone not power on now(((

kashifgsm125 · 04-05-2012, 09:56

brother go to support download full flash file
and write flash phone

bazanoff · 04-05-2012, 10:09

Quote:

Originally Posted by kashifgsm125

brother go to support download full flash file
and write flash phone

no full flash on support(((only repair file

kashifgsm125 · 04-05-2012, 10:36

repair boot file and then click read info

or contact

[email protected]

bazanoff · 04-06-2012, 12:19

maybe someone have full dump from U8180 kyivstra Ukraine??

Medusa Box · 04-06-2012, 12:30

Have You tried to connect the device in Advanced Mode and make Erase Full flash and then connect it in EasyRepair Mode and Repair it again?
Post here full log with these actions.

bazanoff · 04-07-2012, 07:07

Quote:

Originally Posted by Medusa Box

Have You tried to connect the device in Advanced Mode and make Erase Full flash and then connect it in EasyRepair Mode and Repair it again?
Post here full log with these actions.

Log started at 06.04.2012 14:41:08 ...
Welcome to Medusa Box Software version 1.4.1
Selected device model: Huawei U8180
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: C01B30E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.54 V
CPU : Qualcomm MSM7225
Core ID : C01B30E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID : 00AD55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
Connect successful.
ECC Mode enabled.
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
Disconnected
Selected device model: Huawei U8180
Connecting. Please wait...
MI: RTCK reaction time 189 ns, average speed 5291 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: C01B30E1, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.54 V
CPU : Qualcomm MSM7225
Core ID : C01B30E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000037.
MI: Detailed server caps: FLASH, CFG, ECC, WDOG, DWP
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xA0AD55BC.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000037
Flash device: Hynix H8BES0UQ0MCR
Flash ID : 00AD55BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_U8180_Repai r.mf" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done
Disconnected
and nothing((((

jktuf · 05-02-2012, 08:26

Quote:

Originally Posted by bazanoff

maybe someone have full dump from U8180 kyivstra Ukraine??

Напиши email, я тебе вышлю фул от киевстара, можеш не мучать телефон, он оживёт только после киевстаровкого фула и будет залочен под киевстар.

bazanoff · 05-03-2012, 06:51

Quote:

Originally Posted by jktuf

Напиши email, я тебе вышлю фул от киевстара, можеш не мучать телефон, он оживёт только после киевстаровкого фула и будет залочен под киевстар.

[email protected] snx (спасибо заранее)

HumdyAbdelkader · 05-06-2012, 14:18

How can I send a shutdown signal to the car using this device?

04-05-2012, 07:08	#1 (permalink)
bazanoff Freak Poster Join Date: Oct 2005 Location: Ukraine,Che.City Posts: 122 Member: 192751 Status: Offline Thanks Meter: 12	huawei u8180(Kyivstar) problem hello , after easy repair huawei u8180 didnt enter download mode and didnt power on(( before repair phone was in working condition.help me pls

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-21-1999 19:43
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

04-05-2012, 07:31	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Hello. 1. If your device was in working condition - why You have tried to repair it's boot? 2. Post here full software log with all of your actions.

04-05-2012, 08:08	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Try to connect the device in Advanced Mode and make Erase Full flash. Then connect it in EasyRepair Mode and Repair it again.

04-05-2012, 09:56	#7 (permalink)
kashifgsm125 Insane Poster Join Date: Feb 2012 Age: 35 Posts: 92 Member: 1725478 Status: Offline Thanks Meter: 7	brother go to support download full flash file and write flash phone

04-05-2012, 10:36	#9 (permalink)
kashifgsm125 Insane Poster Join Date: Feb 2012 Age: 35 Posts: 92 Member: 1725478 Status: Offline Thanks Meter: 7	repair boot file and then click read info or contact [email protected]

04-06-2012, 12:19	#10 (permalink)
bazanoff Freak Poster Join Date: Oct 2005 Location: Ukraine,Che.City Posts: 122 Member: 192751 Status: Offline Thanks Meter: 12	maybe someone have full dump from U8180 kyivstra Ukraine??

04-06-2012, 12:30	#11 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Have You tried to connect the device in Advanced Mode and make Erase Full flash and then connect it in EasyRepair Mode and Repair it again? Post here full log with these actions.

05-06-2012, 14:18	#15 (permalink)
HumdyAbdelkader Junior Member Join Date: May 2012 Posts: 2 Member: 1754986 Status: Offline Thanks Meter: 0	How can I send a shutdown signal to the car using this device?