huawei u8800+ cannt flash [Solved] - GSM-Forum

otabekusto · 06-18-2012, 08:16

Welcome to Medusa Box Software version 1.5.0
Selected device model: Huawei U8800
Connecting. Please wait...
Resetting target. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
ERROR[035]: Target device has been powered off during connect.
Selected device model: Huawei U8800
Connecting. Please wait...
Resetting target. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
Unsupported CPU detected (ID: 205720E1).
ERROR[035]: Target device has been powered off during connect.

Medusa Box · 06-18-2012, 08:26

Hello.

Quote:

ERROR[035]: Target device has been powered off during connect.

Your U8800 has been powered off during connect. Please try to connect again. Use USB cable for powering the device.

otabekusto · 06-19-2012, 05:27

what ever this problem Unsupported CPU detected (ID: 205720E1).

Medusa Box · 06-19-2012, 05:46

Seems there is another CPU in your phone than in the supported one.

patentasre · 08-26-2012, 11:55

Selected device model: Huawei U8800
Connecting. Please wait...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 27B360E1, IR Length = 5.
Unsupported CPU detected (ID: 205720E1).
ERROR[035]: Target device has been powered off during connect.

i try with usb and batt charged but always same.

Medusa Box · 08-27-2012, 07:47

There is unsupported CPU in your phone (your phone has another PCB revision than in the supported one). Please contact us to Sonork or to Yahoo! Messenger, we will try to prepare test version for You.

patentasre · 08-28-2012, 10:51

hello.can you check msn mail please?

Quote:

Originally Posted by Medusa Box

There is unsupported CPU in your phone (your phone has another PCB revision than in the supported one). Please contact us to Sonork or to Yahoo! Messenger, we will try to prepare test version for You.

Medusa Box · 08-28-2012, 12:27

Please contact us to Sonork or to Yahoo! Messenger or write us to PM.

Viking · 08-28-2012, 21:38

On my hands 2 PCB HD3U880M VER.C RF

Selected device model: Huawei U8800
Connecting. Please wait...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
Unsupported CPU detected (ID: 205720E1).
ERROR[035]: Target device has been powered off during connect.

Medusa Box · 08-29-2012, 07:26

@ Viking

Hello.
Please check your PM for test version.

Viking · 08-29-2012, 11:29

With Medusa_1.5.3.1T.exe:
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
MI: Halting target, attempt 1.
MI: Qualcomm ARM1136JF-S core detected.
MI: Qualcomm CPUID = 205720E1.
JTAG speed : 1000 KHz.
VREF level : 1.79 V
CPU : Qualcomm MSM8255
Core ID : 205720E1
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000191.
MI: Detailed server caps: FLASH, WDOG, A64, IOCTL
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Server init.
MI: Received flash ID 0xE0020001.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000191
Storage Device: Unknown (*******) eMMC SEM04G
Device ID : 00020001
Block size : 512 bytes
Blocks : 7733248
Storage size : 3776 Mb
Connect successful.
Disconnected

All 2 pcb with new cpu repaired.

sashkakulevskii · 10-16-2012, 10:47

Selected device model: Huawei U8800
Connecting. Please wait...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 27B360E1, IR Length = 5.
JTAG speed : Auto (RTCK).
VREF level : 1.81 V
CPU : Qualcomm MSM8255
Core ID : 205720E1
ERROR[004]: Medusa Device Server did not replied to HELLO command.

Medusa Box · 10-16-2012, 12:25

Try to connect with different Jtag speed.

06-18-2012, 08:16	#1 (permalink)
otabekusto Junior Member Join Date: Sep 2007 Posts: 13 Member: 596580 Status: Offline Thanks: 11 Thanked 0 Times in 0 Posts	huawei u8800+ cannt flash [Solved] Welcome to Medusa Box Software version 1.5.0 Selected device model: Huawei U8800 Connecting. Please wait... Resetting target. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. ERROR[035]: Target device has been powered off during connect. Selected device model: Huawei U8800 Connecting. Please wait... Resetting target. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 27B360E1, IR Length = 5. Unsupported CPU detected (ID: 205720E1). ERROR[035]: Target device has been powered off during connect. Last edited by Medusa Box; 08-29-2012 at 12:32.

08-26-2012, 11:55	#5 (permalink)
patentasre Junior Member Join Date: Jun 2006 Location: greece Posts: 24 Member: 300055 Status: Offline Sonork: 100.1620508 Thanks: 3 Thanked 0 Times in 0 Posts	u8800 repair error 035 Selected device model: Huawei U8800 Connecting. Please wait... Resetting target. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: 27B360E1, IR Length = 5. Unsupported CPU detected (ID: 205720E1). ERROR[035]: Target device has been powered off during connect. i try with usb and batt charged but always same.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
FLASH BOX WANTED!!!!!!	J	Wanted Products	9	07-14-2012 20:42
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	11-17-2011 17:08
Nokia Flash Content.	Phantom	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	05-01-2000 23:28
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	08-16-1999 12:20
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	07-07-1999 12:27

06-19-2012, 05:27	#3 (permalink)
otabekusto Junior Member Join Date: Sep 2007 Posts: 13 Member: 596580 Status: Offline Thanks: 11 Thanked 0 Times in 0 Posts	what ever this problem Unsupported CPU detected (ID: 205720E1).

06-19-2012, 05:46	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Seems there is another CPU in your phone than in the supported one.

08-27-2012, 07:47	#6 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	There is unsupported CPU in your phone (your phone has another PCB revision than in the supported one). Please contact us to Sonork or to Yahoo! Messenger, we will try to prepare test version for You.

08-28-2012, 12:27	#8 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Please contact us to Sonork or to Yahoo! Messenger or write us to PM.

08-28-2012, 21:38	#9 (permalink)
Viking Freak Poster Join Date: Jan 2003 Location: Belarus Age: 41 Posts: 368 Member: 19585 Status: Online Sonork: 100.75631 Thanks: 106 Thanked 17 Times in 15 Posts	On my hands 2 PCB HD3U880M VER.C RF Selected device model: Huawei U8800 Connecting. Please wait... Resetting target. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 27B360E1, IR Length = 5. Unsupported CPU detected (ID: 205720E1). ERROR[035]: Target device has been powered off during connect.

08-29-2012, 07:26	#10 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	@ Viking Hello. Please check your PM for test version.

08-29-2012, 11:29	#11 (permalink)
Viking Freak Poster Join Date: Jan 2003 Location: Belarus Age: 41 Posts: 368 Member: 19585 Status: Online Sonork: 100.75631 Thanks: 106 Thanked 17 Times in 15 Posts	With Medusa_1.5.3.1T.exe: Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 27B360E1, IR Length = 5. MI: Halting target, attempt 1. MI: Qualcomm ARM1136JF-S core detected. MI: Qualcomm CPUID = 205720E1. JTAG speed : 1000 KHz. VREF level : 1.79 V CPU : Qualcomm MSM8255 Core ID : 205720E1 MI: Loading Medusa Device Server V1.2. MI: Starting... MI: Received status 0x0000F00F, cycle 0. MI: Received server capabilities 0x00000191. MI: Detailed server caps: FLASH, WDOG, A64, IOCTL MI: Watchdog configuration: 0xB800010C, 0x00000001... ok MI: Server init. MI: Received flash ID 0xE0020001. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000191 Storage Device: Unknown (*******) eMMC SEM04G Device ID : 00020001 Block size : 512 bytes Blocks : 7733248 Storage size : 3776 Mb Connect successful. Disconnected All 2 pcb with new cpu repaired.

10-16-2012, 10:47	#12 (permalink)
sashkakulevskii Junior Member Join Date: Sep 2010 Location: Belarus,Grodno Posts: 3 Member: 1397985 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	Selected device model: Huawei U8800 Connecting. Please wait... Resetting target. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 27B360E1, IR Length = 5. JTAG speed : Auto (RTCK). VREF level : 1.81 V CPU : Qualcomm MSM8255 Core ID : 205720E1 ERROR[004]: Medusa Device Server did not replied to HELLO command.

10-16-2012, 12:25	#13 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 2,168 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks: 880 Thanked 721 Times in 474 Posts	Try to connect with different Jtag speed.