LG D325 F8 "dead" boot repair question [Answered]

[mcdiniz]

Hi

is possible repair this phone D325F8 i already tried repair usb mode . but phone is deteted as QDLoader 9008

CPU         : Qualcomm MSM8610
Storage Device: Hynix eMMC H4G1d
Device ID     : 00900001
 Block size   : 512 bytes
 Blocks       : 7634944
 Storage size : 3728 Mb
Connect successful.
Disconnected
Selected device model: LG D325F8 (MSM8610) USB
Connecting. Please wait...
Interface   : USB
CPU         : Qualcomm MSM8610
Storage Device: Hynix eMMC H4G1d
Device ID     : 00909201
 Block size   : 512 bytes
 Blocks       : 7634944
 Storage size : 3728 Mb
Opening "C:\Program Files\GsmServer\Medusa_old\Firmware\LG_D325F8_Repair.mf" file...
Writing ABOOT section. Please wait... Done
Writing BOOT section. Please wait... Done
Disconnected
Repair done.

EMMC Jtag mode:

Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : LG
Model     : D325
SRF       : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_D325_EMMC.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Hynix eMMC H4G1d
Page size    : 512 B
Block size   : 512 B
Block count  : 7634944
Size         : 3728.00 MB
---------------------------------------------------------------
CID Info

CID                   : 90014A4834473164040509A2973B12D9
Manufacturer ID       : 0X90
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X4A
Product name          : H4G1d
Product revision      : 0.5
Product serial number : (hex) 9A2973B
Manufacturing date    : 01/2015
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H4G1d_10_01_2019_16_03_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.2; FW: 1.24.

[Medusa Box]

Hello.

Please try to do "Factory Repair" procedure ("Factory repair" tab in Software) using the latest available original LG firmware for this device (in "*.tot", "*.dz" or "*.kdz" format). Post here full Software log.